Description
Universal 2-way solenoid valve, type 6213 valve can be installed in any position, but it is the best choice to install it together with the coil. The normally closed solenoid valve is suitable for parallel ports of oil, additive free lipids, water, and neutral fluids BSP, and is suitable for use with compression fasteners. The epoxy resin coil protection level is IP65, and the 3-pin DIN connector can be positioned in increments of 90 ° within a range of 0-10 bar. The rated power of the coil is 8W, and the maximum working temperature is 55 ° C. The power consumption is 21VA (starting, AC); 12 VA/8 W (constant, AC); 8W (DC) protection level IP65 # # # 2-channel inert gas and fluid valve small solenoid valve, suitable for most gas and fluid processing applications. The schematic diagram illustrates the (circuit) functions of various solenoid valves. This diagram is developed in layers, and the left side of the diagram is sufficient to describe the operating condition of the valve when the coil is energized. When the coil loses power, the spring (or servo assist) re controls the valve, as described on the right side of the diagram. The 3/2-way design indicates that the valve has three ports and two operating modes. Usually, 2/2-way valves are referred to as two-way valves. The schematic diagram uses A, B, P, P1, P2, and R port markings, which are also indicated on the valve body. The valve body is usually marked for specific line functions and can also be used for other purposes. The schematic diagram and technical parameters will indicate the corresponding connections and pressure performance that require alternative circuit functions.
Delivery time
Packaging method
Standard packaging quantity
1
The most helpful review