Description:
DS6213-EV Series 2/2 stainless steel solenoid valve Burkerts new series 2-way normally closed solenoid valve. Made of stainless steel, designed for use with water as well as inert liquids and gases. The soft mechanical coupling between the main piston and the guiding armature helps to ensure smooth operation, and the precisely crafted main path helps to ensure that the water hammer works quietly and freely. Suitable for various applications, including compressed air and vacuum systems, heating and cooling, water treatment, and swimming pool technology. Compact design, suitable for installation with limited space, working pressure of 0-10 bar, response time of 0.1-4 seconds, no pressure difference when opened, minimum pressure difference of 0.5 bar, used for fully opening high flow sealed coils IP65 rating. Note that due to the complexity of these valves, they can only be used with clean neutral media. ###2-way inert gas and fluid valve small solenoid valve, suitable for most gas and fluid processing applications. The schematic diagram illustrates the (circuit) functions of various solenoid valves. This diagram is developed in layers, and the left side of the diagram is sufficient to describe the operating condition of the valve when the coil is energized. When the coil loses power, the spring (or servo assist) re controls the valve, as described on the right side of the diagram. The 3/2-way design indicates that the valve has three ports and two operating modes. Usually, 2/2-way valves are referred to as two-way valves. The schematic diagram uses A, B, P, P1, P2, and R port markings, which are also indicated on the valve body. The valve body is usually marked for specific line functions and can also be used for other purposes. The schematic diagram and technical parameters will indicate the corresponding connections and pressure performance that require alternative circuit functions.
