Model/Brand/Package
Category/Description
Inventory
Price
Data
-
![]()
Category: level sensorDescription: 180° Perform normally open or normally closed operation. 304 grade stainless steel structure, especially suitable for corrosive environments. Composed of reed switch and pivot actuator magnet, high operating temperature (120 ° C) 0.8mn liquid SG can be optionally connected: 100cm XLPE sheathed wire (756-4283756-4292756-4132756-4126-4126431-839431-8406756-4108), M12 plug connection (lead provided separately, 780-03780-0365780-0377) DIN 43650 2-pole connection (plug sold separately, 780-0835) # # # Note: Suitable for signal switches, can be used in conjunction with transistorized input/low power, suppression coil small relays. Not suitable for inductive or surge loads (such as incandescent lamps). ###Horizontal float control switch64281+$1504.295110+$1490.619725+$1483.782050+$1476.9443100+$1470.1066150+$1463.2689250+$1456.4312500+$1449.5935 -
![]()
Category: level sensorDescription: SSF67PM12 The SSF67 series floats of Cynergy 3 are designed to provide different switching options using a longer range of floats. The float is made of stainless steel 316L and is suitable for corrosive liquids and applications that require attention to hygiene. Floats can provide high and low liquid level indications for alarm and control systems. Single or Double Switching Liquid Level M16 Installation Thread # # # Vertical Float Control Switch75011+$2119.027910+$2099.764025+$2090.132150+$2080.5001100+$2070.8682150+$2061.2362250+$2051.6043500+$2041.9723 -
![]()
Category: level sensorDescription: CYNERGY3 SSF50X100X. Slosh guard vert SS 50W 1m 77Y7045 new31471+$1813.724010+$1797.235625+$1788.991450+$1780.7472100+$1772.5030150+$1764.2588250+$1756.0146500+$1747.7704 -
![]()
Category: level sensorDescription: 180° Perform normally open or normally closed operation. 304 grade stainless steel structure, especially suitable for corrosive environments. Composed of reed switch and pivot actuator magnet, high operating temperature (120 ° C) 0.8mn liquid SG can be optionally connected: 100cm XLPE sheathed wire (756-4283756-4292756-4132756-4126-4126431-839431-8406756-4108), M12 plug connection (lead provided separately, 780-03780-0365780-0377) DIN 43650 2-pole connection (plug sold separately, 780-0835) # # # Note: Suitable for signal switches, can be used in conjunction with transistorized input/low power, suppression coil small relays. Not suitable for inductive or surge loads (such as incandescent lamps). ###Horizontal float control switch16431+$1620.595910+$1605.863225+$1598.496950+$1591.1305100+$1583.7642150+$1576.3978250+$1569.0315500+$1561.6651 -
![]()
Category: level sensorDescription: SSF25 The SSF25 series vertical installation float switch is compact and can be installed on the top or bottom of containers. The switch action can be reversed by reversing the float. SSF25 is an M16 internally installed float. Internally installed with 1/2 "BSP thread, stainless steel 316 micro design M12 connector # # # Vertical float switch67151+$588.517010+$567.867350+$565.2861100+$562.7049150+$558.5749250+$554.9612500+$551.34751000+$547.2176 -
![]()
Category: level sensorDescription: 304 Grade stainless steel structure, especially suitable for corrosive environments. Internal installation type requires access to the interior of the water tank for miniaturization design - the total length of the water tank is only 54.5mm 1/8 BSP, and it can be installed on a 10mm thick wall with high operating temperature (120 ° C). Users can configure the normally open or normally closed operation switch voltage by rotating 180 ° | 24V AC/24V DC --- | maximum pressure | 5 bar liquid density | 0.8 min. Minimum breakdown voltage | 150V DC contact type | N/O or N/C switching power | 1VA maximum switching current | 0.1A cable size | 17//0.10-22AWG (0.5m XLPE) # # # Horizontal float switch71601+$1698.854310+$1683.410225+$1675.688150+$1667.9660100+$1660.2440150+$1652.5219250+$1644.7998500+$1637.0778 -
![]()
Category: level sensorDescription: SG：0.80 Switch differential (per liquid level) nominal: 1mm Suitable for high and low liquid level alarm and signal control Stainless steel 316L, can be used with corrosive liquids, or vertically installed in applications with strict hygiene requirements, M16 x 2 thread temperature range: -20 to+135 ° C Nitrile lining safety zone for petrochemical, storage, and process control applications Technical specifications - Minimum fluid S.G | 0.80 minimum high liquid level | 25mm switch differential (per liquid level) nominal | 1mm # # # # All rated values in the parameter table of the injection technology are only used for resistive loads # # # Vertical float control switch warning * Cable inlet point must not be lower than the liquid level to be immersed. Horizontal switches must be installed through slot walls so that cables can be placed externally. The installation thread and cable inlet of the vertical switch must be higher than the maximum liquid level.75211+$2466.666410+$2444.242225+$2433.030050+$2421.8179100+$2410.6058150+$2399.3937250+$2388.1816500+$2376.9694 -
![]()
Category: level sensorDescription: SSF67PM12 The SSF67 series floats of Cynergy 3 are designed to provide different switching options using a longer range of floats. The float is made of stainless steel 316L and is suitable for corrosive liquids and applications that require attention to hygiene. Floats can provide high and low liquid level indications for alarm and control systems. Single or Double Switching Liquid Level M16 Installation Thread # # # Vertical Float Control Switch17111+$2298.529210+$2277.633525+$2267.185650+$2256.7378100+$2246.2899150+$2235.8420250+$2225.3942500+$2214.9463 -
![]()
Category: level sensorDescription: The dual position stainless steel float switch is designed to provide users with multiple switching options to meet various system requirements. These switches are most suitable for applications that require aggressive liquids and strict hygiene conditions. Double independent switching point, low position floating descent, high position floating ascent, minimum fluid SG: 0.80 switch differential (per liquid level) nominal: 1mm. Suitable for high and low liquid level alarm and signal control. Made of stainless steel 316L, it can be used with corrosive liquids or vertically installed in applications with strict hygiene requirements. M16 x 2 thread temperature range: -20 to+135 ° C. Nitrile pad safety zone for petrochemical, storage, and process control applications. Technical specifications - Minimum fluid S.G | 0.80 minimum high liquid level | 25mm switch differential (per liquid level) nominal | 1mm. All rated values in the parameter table of the injection technology are only used for resistive loads. Vertical float control switch warning: The cable inlet point must not be lower than the one to be immersed. Liquid level. Horizontal switches must be installed through slot walls so that cables can be placed externally. The installation thread and cable inlet of the vertical switch must be higher than the maximum liquid level.66641+$2442.625910+$2420.420225+$2409.317450+$2398.2145100+$2387.1117150+$2376.0088250+$2364.9060500+$2353.8031 -
![]()
Category: level sensorDescription: SG：0.80 Switch differential (per liquid level) nominal: 1mm Suitable for high and low liquid level alarm and signal control Stainless steel 316L, can be used with corrosive liquids, or vertically installed in applications with strict hygiene requirements, M16 x 2 thread temperature range: -20 to+135 ° C Nitrile lining safety zone for petrochemical, storage, and process control applications Technical specifications - Minimum fluid S.G | 0.80 minimum high liquid level | 25mm switch differential (per liquid level) nominal | 1mm # # # # All rated values in the parameter table of the injection technology are only used for resistive loads # # # Vertical float control switch warning * Cable inlet point must not be lower than the liquid level to be immersed. Horizontal switches must be installed through slot walls so that cables can be placed externally. The installation thread and cable inlet of the vertical switch must be higher than the maximum liquid level.25141+$2386.921910+$2365.222625+$2354.373050+$2343.5233100+$2332.6737150+$2321.8240250+$2310.9744500+$2300.1247 -
![]()
Category: level sensorDescription: SG：0.80 Switch differential (per liquid level) nominal: 1mm Suitable for high and low liquid level alarm and signal control Stainless steel 316L, can be used with corrosive liquids, or vertically installed in applications with strict hygiene requirements, M16 x 2 thread temperature range: -20 to+135 ° C Nitrile lining safety zone for petrochemical, storage, and process control applications Technical specifications - Minimum fluid S.G | 0.80 minimum high liquid level | 25mm switch differential (per liquid level) nominal | 1mm # # # # All rated values in the parameter table of the injection technology are only used for resistive loads # # # Vertical float control switch warning * Cable inlet point must not be lower than the liquid level to be immersed. Horizontal switches must be installed through slot walls so that cables can be placed externally. The installation thread and cable inlet of the vertical switch must be higher than the maximum liquid level.56681+$2325.103010+$2303.965725+$2293.397150+$2282.8284100+$2272.2598150+$2261.6911250+$2251.1225500+$2240.5538 -
![]()
Category: level sensorDescription: SG：0.80 Switch differential (per liquid level) nominal: 1mm Suitable for high and low liquid level alarm and signal control Stainless steel 316L, can be used with corrosive liquids, or vertically installed in applications with strict hygiene requirements, M16 x 2 thread temperature range: -20 to+135 ° C Nitrile lining safety zone for petrochemical, storage, and process control applications Technical specifications - Minimum fluid S.G | 0.80 minimum high liquid level | 25mm switch differential (per liquid level) nominal | 1mm # # # # All rated values in the parameter table of the injection technology are only used for resistive loads # # # Vertical float control switch warning * Cable inlet point must not be lower than the liquid level to be immersed. Horizontal switches must be installed through slot walls so that cables can be placed externally. The installation thread and cable inlet of the vertical switch must be higher than the maximum liquid level.53391+$2128.754110+$2109.401825+$2099.725650+$2090.0495100+$2080.3733150+$2070.6972250+$2061.0210500+$2051.3449 -
![]()
Category: level sensorDescription: 40 Bar Under pressure, the horizontal installation can be reversed with a switch action (normally open or normally closed). The maximum installation wall thickness of the 350mm XLPE cable is 10mm, with a temperature range of -10 to 120 ° C and a maximum pressure of 40 bar. The float and rod material is made of food grade 316 stainless steel cable. The XLPE installation thread is 1/8 "BSP, and the maximum installation wall thickness is 10mm. The vertical float control switch warning: The cable connection point must not be lower than any submerged environment. In the horizontal switch, it must be installed through the slot wall so that the cable can be placed externally. For vertical types, installation threads and cable entry lines must be above the maximum liquid level of the liquid.24531+$1467.100810+$1453.763525+$1447.094950+$1440.4262100+$1433.7576150+$1427.0890250+$1420.4203500+$1413.7517 -
![]()
Category: level sensorDescription: SG：0.80 Switch differential (per liquid level) nominal: 1mm Suitable for high and low liquid level alarm and signal control Stainless steel 316L, can be used with corrosive liquids, or vertically installed in applications with strict hygiene requirements, M16 x 2 thread temperature range: -20 to+135 ° C Nitrile lining safety zone for petrochemical, storage, and process control applications Technical specifications - Minimum fluid S.G | 0.80 minimum high liquid level | 25mm switch differential (per liquid level) nominal | 1mm # # # # All rated values in the parameter table of the injection technology are only used for resistive loads # # # Vertical float control switch warning * Cable inlet point must not be lower than the liquid level to be immersed. Horizontal switches must be installed through slot walls so that cables can be placed externally. The installation thread and cable inlet of the vertical switch must be higher than the maximum liquid level.65861+$2177.913110+$2158.113925+$2148.214350+$2138.3147100+$2128.4151150+$2118.5155250+$2108.6159500+$2098.7163 -
![]()
Category: level sensorDescription: CYNERGY3 SSF50X100X-C. Slosh guard vert with check SS 50W 1m 77Y7046 new17191+$1938.599310+$1920.975725+$1912.163950+$1903.3520100+$1894.5402150+$1885.7284250+$1876.9166500+$1868.1048 -
![]()
Category: level sensorDescription: SSF67PM12 The SSF67 series floats of Cynergy 3 are designed to provide different switching options using a longer range of floats. The float is made of stainless steel 316L and is suitable for corrosive liquids and applications that require attention to hygiene. Floats can provide high and low liquid level indications for alarm and control systems. Single or Double Switching Liquid Level M16 Installation Thread # # # Vertical Float Control Switch94981+$2352.379710+$2330.994425+$2320.301850+$2309.6092100+$2298.9165150+$2288.2239250+$2277.5313500+$2266.8386 -
![]()
Category: level sensorDescription: SSF67PM12 The SSF67 series floats of Cynergy 3 are designed to provide different switching options using a longer range of floats. The float is made of stainless steel 316L and is suitable for corrosive liquids and applications that require attention to hygiene. Floats can provide high and low liquid level indications for alarm and control systems. Single or Double Switching Liquid Level M16 Installation Thread # # # Vertical Float Control Switch77861+$2298.529210+$2277.633525+$2267.185650+$2256.7378100+$2246.2899150+$2235.8420250+$2225.3942500+$2214.9463 -
![]()
Category: level sensorDescription: SSF67PM12 The SSF67 series floats of Cynergy 3 are designed to provide different switching options using a longer range of floats. The float is made of stainless steel 316L and is suitable for corrosive liquids and applications that require attention to hygiene. Floats can provide high and low liquid level indications for alarm and control systems. Single or Double Switching Liquid Level M16 Installation Thread # # # Vertical Float Control Switch75121+$2197.790110+$2177.810225+$2167.820250+$2157.8303100+$2147.8403150+$2137.8504250+$2127.8604500+$2117.8705 -
![]()
Category: level sensorDescription: SSF 22 The series of miniature vertical float switches SSF22 vertical float control switches are compact vertical installation devices designed to achieve reliable switching. Made of 316 grade stainless steel and featuring a compact design. By removing the float and reversing it, then reinstalling it onto the valve stem, the switch action can be reversed. The SSF22 vertical float switch can be configured by the user as normally open or normally closed. Temperature range up to 120 ° C # # # Vertical float switch65051+$884.613810+$853.574750+$849.6948100+$845.8149150+$839.6071250+$834.1753500+$828.74341000+$822.5356 -
![]()
Category: level sensorDescription: SG：0.80 Switch differential (per liquid level) nominal: 1mm Suitable for high and low liquid level alarm and signal control Stainless steel 316L, can be used with corrosive liquids, or vertically installed in applications with strict hygiene requirements, M16 x 2 thread temperature range: -20 to+135 ° C Nitrile lining safety zone for petrochemical, storage, and process control applications Technical specifications - Minimum fluid S.G | 0.80 minimum high liquid level | 25mm switch differential (per liquid level) nominal | 1mm # # # # All rated values in the parameter table of the injection technology are only used for resistive loads # # # Vertical float control switch warning * Cable inlet point must not be lower than the liquid level to be immersed. Horizontal switches must be installed through slot walls so that cables can be placed externally. The installation thread and cable inlet of the vertical switch must be higher than the maximum liquid level.90791+$2230.077310+$2209.803925+$2199.667250+$2189.5304100+$2179.3937150+$2169.2570250+$2159.1203500+$2148.9836 -
![]()
Category: level sensorDescription: FLOAT SWITCH, VERT; Output Current: 500mA; SVHC: No SVHC (20-Jun-2011); Body Material: Stainless Steel; Contact Confi...9957 -
![]()
Category: level sensorDescription: cynergy3 Horizontal float switch is a simple electromechanical device used for level switching in high-level and low-level applications. These float switches consist of reed switches and pivot actuator magnets, and can be used for normally open or normally closed operation. The switch action can rotate the switch 180 ° in reverse. ###Features and advantages: Compact design of 304 grade stainless steel valve stem, especially suitable for corrosive environments. 316 grade stainless steel float can be used with liquid SG for 0.8 minutes. Suitable for signal switches, it can be used in conjunction with transistorized input/low power, suppression coil small relays. Not suitable for inductive or surge loads (such as incandescent lamps). This float switch is designed for external horizontal installation using inch NPT threads, and can be installed on a water tank without the need to enter the interior of the tank. The external fixing parts are made of stainless steel 316 float, with a 100 cm flying wire of 10 mm and a maximum wall thickness of the water tank82601+$735.583910+$709.773950+$706.5477100+$703.3214150+$698.1594250+$693.6427500+$689.12591000+$683.9639 -
![]()
Category: level sensorDescription: CYNERGY3 SSH66TU12N100S Sensor, float switch, stainless steel, 24VDC61411+$1758.163010+$1742.179725+$1734.188150+$1726.1964100+$1718.2048150+$1710.2131250+$1702.2215500+$1694.2298 -
![]()
Category: level sensorDescription: SSH66 The 304 grade stainless steel structure of the series horizontal steel floating switch is particularly suitable for corrosive environments. High temperature operation composed of reed switch and pivot actuator magnet, up to 120 ° C 0.1/1m XLPE cable 0.75mn liquid SG. Users can configure normally open or normally closed operation by rotating 180 ° # # Horizontal float switch38651+$1771.422410+$1755.318625+$1747.266650+$1739.2147100+$1731.1628150+$1723.1109250+$1715.0590500+$1707.0070 -
![]()
Category: level sensorDescription: 180° Perform normally open or normally closed operation. 304 grade stainless steel structure, especially suitable for corrosive environments. Composed of reed switch and pivot actuator magnet, high operating temperature (120 ° C) 0.8mn liquid SG can be optionally connected: 100cm XLPE sheathed wire (756-4283756-4292756-4132756-4126-4126431-839431-8406756-4108), M12 plug connection (lead provided separately, 780-03780-0365780-0377) DIN 43650 2-pole connection (plug sold separately, 780-0835) # # # Note: Suitable for signal switches, can be used in conjunction with transistorized input/low power, suppression coil small relays. Not suitable for inductive or surge loads (such as incandescent lamps). ###Horizontal float control switch14361+$1265.957010+$1254.448325+$1248.694050+$1242.9396100+$1237.1853150+$1231.4309250+$1225.6766500+$1219.9222 -
![]()
Category: level sensorDescription: 180° Perform normally open or normally closed operation. 304 grade stainless steel structure, especially suitable for corrosive environments. Composed of reed switch and pivot actuator magnet, high operating temperature (120 ° C) 0.8mn liquid SG can be optionally connected: 100cm XLPE sheathed wire (756-4283756-4292756-4132756-4126-4126431-839431-8406756-4108), M12 plug connection (lead provided separately, 780-03780-0365780-0377) DIN 43650 2-pole connection (plug sold separately, 780-0835) # # # Note: Suitable for signal switches, can be used in conjunction with transistorized input/low power, suppression coil small relays. Not suitable for inductive or surge loads (such as incandescent lamps). ###Horizontal float control switch28821+$1692.636010+$1677.248425+$1669.554650+$1661.8608100+$1654.1670150+$1646.4732250+$1638.7794500+$1631.0856 -
![]()
Category: level sensorDescription: 180° Perform normally open or normally closed operation. 304 grade stainless steel structure, especially suitable for corrosive environments. Composed of reed switch and pivot actuator magnet, high operating temperature (120 ° C) 0.8mn liquid SG can be optionally connected: 100cm XLPE sheathed wire (756-4283756-4292756-4132756-4126-4126431-839431-8406756-4108), M12 plug connection (lead provided separately, 780-03780-0365780-0377) DIN 43650 2-pole connection (plug sold separately, 780-0835) # # # Note: Suitable for signal switches, can be used in conjunction with transistorized input/low power, suppression coil small relays. Not suitable for inductive or surge loads (such as incandescent lamps). ###Horizontal float control switch93931+$1413.937810+$1401.083825+$1394.656850+$1388.2298100+$1381.8029150+$1375.3759250+$1368.9489500+$1362.5219 -
![]()
Category: level sensorDescription: SSV66-SM16 SSV66-SM16 series side mounted vertical dual level switch Cynergy 3. These installation components have side access and are installed inside your container, requiring appropriate access. This dual switch provides high/low indication for users and can be used in systems that control processes through PLC. M16 installation thread stainless steel 316L 1m standard cable length internal installation # # # Vertical float switch25571+$919.973210+$887.693450+$883.6584100+$879.6235150+$873.1675250+$867.5186500+$861.86961000+$855.4136 -
![]()
Category: level sensorDescription: SSV66 The SSV66 series stainless steel float switch provides high, low, or high/low level monitoring and is suitable for 45 gallon drums. These float switches do not require access to the inside of the drum as they can be installed from the outside of the drum through 3/4 "NPT plug holes. Suitable for external installation of 45 gallon drum with high/low level switching function through 3/4 "NPT normally open or normally closed switching. Suitable for standard 3/4" NPT plug hole fly wire or 4-pin M12 connection. # # Vertical float switch warning: The cable entry point must not be lower than the liquid level to be immersed. Horizontal switches must be installed through slot walls so that cables can be placed externally. The installation thread and cable inlet of the vertical switch must be higher than the maximum liquid level.59201+$1659.436910+$1644.351125+$1636.808250+$1629.2653100+$1621.7224150+$1614.1795250+$1606.6366500+$1599.0937
