Description:
SSV66 The SSV66 series stainless steel float switch provides high, low, or high/low level monitoring and is suitable for 45 gallon drums. These float switches do not require access to the inside of the drum as they can be installed from the outside of the drum through 3/4 "NPT plug holes. Suitable for external installation of 45 gallon drum with high/low level switching function through 3/4 "NPT normally open or normally closed switching. Suitable for standard 3/4" NPT plug hole fly wire or 4-pin M12 connection. # # Vertical float switch warning: The cable entry point must not be lower than the liquid level to be immersed. Horizontal switches must be installed through slot walls so that cables can be placed externally. The installation thread and cable inlet of the vertical switch must be higher than the maximum liquid level.
Description:
SSV66-SM16 SSV66-SM16 series side mounted vertical dual level switch Cynergy 3. These installation components have side access and are installed inside your container, requiring appropriate access. This dual switch provides high/low indication for users and can be used in systems that control processes through PLC. M16 installation thread stainless steel 316L 1m standard cable length internal installation # # # Vertical float switch
Description:
SSV66 The SSV66 series stainless steel float switch provides high, low, or high/low level monitoring and is suitable for 45 gallon drums. These float switches do not require access to the inside of the drum as they can be installed from the outside of the drum through 3/4 "NPT plug holes. Suitable for external installation of 45 gallon drum with high/low level switching function through 3/4 "NPT normally open or normally closed switching. Suitable for standard 3/4" NPT plug hole fly wire or 4-pin M12 connection. # # Vertical float switch warning: The cable entry point must not be lower than the liquid level to be immersed. Horizontal switches must be installed through slot walls so that cables can be placed externally. The installation thread and cable inlet of the vertical switch must be higher than the maximum liquid level.
Description:
SSV66-SM16 SSV66-SM16 series side mounted vertical dual level switch Cynergy 3. These installation components have side access and are installed inside your container, requiring appropriate access. This dual switch provides high/low indication for users and can be used in systems that control processes through PLC. M16 installation thread stainless steel 316L 1m standard cable length internal installation # # # Vertical float switch
Description:
SSV66-SM16 SSV66-SM16 series side mounted vertical dual level switch Cynergy 3. These installation components have side access and are installed inside your container, requiring appropriate access. This dual switch provides high/low indication for users and can be used in systems that control processes through PLC. M16 installation thread stainless steel 316L 1m standard cable length internal installation # # # Vertical float switch
Description:
SSV66 The SSV66 series stainless steel float switch provides high, low, or high/low level monitoring and is suitable for 45 gallon drums. These float switches do not require access to the inside of the drum as they can be installed from the outside of the drum through 3/4 "NPT plug holes. Suitable for external installation of 45 gallon drum with high/low level switching function through 3/4 "NPT normally open or normally closed switching. Suitable for standard 3/4" NPT plug hole fly wire or 4-pin M12 connection. # # Vertical float switch warning: The cable entry point must not be lower than the liquid level to be immersed. Horizontal switches must be installed through slot walls so that cables can be placed externally. The installation thread and cable inlet of the vertical switch must be higher than the maximum liquid level.
Description:
SSV66-SM16 SSV66-SM16 series side mounted vertical dual level switch Cynergy 3. These installation components have side access and are installed inside your container, requiring appropriate access. This dual switch provides high/low indication for users and can be used in systems that control processes through PLC. M16 installation thread stainless steel 316L 1m standard cable length internal installation # # # Vertical float switch
Description:
SSV66 The SSV66 series stainless steel float switch provides high, low, or high/low level monitoring and is suitable for 45 gallon drums. These float switches do not require access to the inside of the drum as they can be installed from the outside of the drum through 3/4 "NPT plug holes. Suitable for external installation of 45 gallon drum with high/low level switching function through 3/4 "NPT normally open or normally closed switching. Suitable for standard 3/4" NPT plug hole fly wire or 4-pin M12 connection. # # Vertical float switch warning: The cable entry point must not be lower than the liquid level to be immersed. Horizontal switches must be installed through slot walls so that cables can be placed externally. The installation thread and cable inlet of the vertical switch must be higher than the maximum liquid level.
Description:
SSV66-SM16 SSV66-SM16 series side mounted vertical dual level switch Cynergy 3. These installation components have side access and are installed inside your container, requiring appropriate access. This dual switch provides high/low indication for users and can be used in systems that control processes through PLC. M16 installation thread stainless steel 316L 1m standard cable length internal installation # # # Vertical float switch
Description:
SSV66A The top mounted liquid level switch of the series has a G1 "thread, which allows the switch to be installed on the outside of the water tank without entering the interior of the tank through the G1" hub. High buoyancy float (0.55 SG) 20 bar maximum working pressure reverse switch operation DIN 43650 connector, easy to connect up to a maximum temperature of 120 ° C # # Vertical float control switch
Description:
SSH66 The 304 grade stainless steel structure of the series horizontal steel floating switch is particularly suitable for corrosive environments. High temperature operation composed of reed switch and pivot actuator magnet, up to 120 ° C 0.1/1m XLPE cable 0.75mn liquid SG. Users can configure normally open or normally closed operation by rotating 180 ° # # Horizontal float switch
Description:
SSH66 The 304 grade stainless steel structure of the series horizontal steel floating switch is particularly suitable for corrosive environments. High temperature operation composed of reed switch and pivot actuator magnet, up to 120 ° C 0.1/1m XLPE cable 0.75mn liquid SG. Users can configure normally open or normally closed operation by rotating 180 ° # # Horizontal float switch
Description:
The dual position stainless steel float switch is designed to provide users with multiple switching options to meet various system requirements. These switches are most suitable for applications that require aggressive liquids and strict hygiene conditions. Double independent switching point, low position floating descent, high position floating ascent, minimum fluid SG: 0.80 switch differential (per liquid level) nominal: 1mm. Suitable for high and low liquid level alarm and signal control. Made of stainless steel 316L, it can be used with corrosive liquids or vertically installed in applications with strict hygiene requirements. M16 x 2 thread temperature range: -20 to+135 ° C. Nitrile pad safety zone for petrochemical, storage, and process control applications. Technical specifications - Minimum fluid S.G | 0.80 minimum high liquid level | 25mm switch differential (per liquid level) nominal | 1mm. All rated values in the parameter table of the injection technology are only used for resistive loads. Vertical float control switch warning: The cable inlet point must not be lower than the one to be immersed. Liquid level. Horizontal switches must be installed through slot walls so that cables can be placed externally. The installation thread and cable inlet of the vertical switch must be higher than the maximum liquid level.
Description:
SSF67PM12 The SSF67 series floats of Cynergy 3 are designed to provide different switching options using a longer range of floats. The float is made of stainless steel 316L and is suitable for corrosive liquids and applications that require attention to hygiene. Floats can provide high and low liquid level indications for alarm and control systems. Single or Double Switching Liquid Level M16 Installation Thread # # # Vertical Float Control Switch
Description:
SSF25 The SSF25 series vertical installation float switch is compact and can be installed on the top or bottom of containers. The switch action can be reversed by reversing the float. SSF25 is an M16 internally installed float. Internally installed with 1/2 "BSP thread, stainless steel 316 micro design M12 connector # # # Vertical float switch
Description:
SSF67PM12 The SSF67 series floats of Cynergy 3 are designed to provide different switching options using a longer range of floats. The float is made of stainless steel 316L and is suitable for corrosive liquids and applications that require attention to hygiene. Floats can provide high and low liquid level indications for alarm and control systems. Single or Double Switching Liquid Level M16 Installation Thread # # # Vertical Float Control Switch
Description:
SG：0.80 Switch differential (per liquid level) nominal: 1mm Suitable for high and low liquid level alarm and signal control Stainless steel 316L, can be used with corrosive liquids, or vertically installed in applications with strict hygiene requirements, M16 x 2 thread temperature range: -20 to+135 ° C Nitrile lining safety zone for petrochemical, storage, and process control applications Technical specifications - Minimum fluid S.G | 0.80 minimum high liquid level | 25mm switch differential (per liquid level) nominal | 1mm # # # # All rated values in the parameter table of the injection technology are only used for resistive loads # # # Vertical float control switch warning * Cable inlet point must not be lower than the liquid level to be immersed. Horizontal switches must be installed through slot walls so that cables can be placed externally. The installation thread and cable inlet of the vertical switch must be higher than the maximum liquid level.
Description:
SSF67PM12 The SSF67 series floats of Cynergy 3 are designed to provide different switching options using a longer range of floats. The float is made of stainless steel 316L and is suitable for corrosive liquids and applications that require attention to hygiene. Floats can provide high and low liquid level indications for alarm and control systems. Single or Double Switching Liquid Level M16 Installation Thread # # # Vertical Float Control Switch
