Model/Brand/Package
Category/Description
Inventory
Price
Data
-
![]()
Category: surge protectionDescription: Phoenix Contact 480 V 交流 50kA 避雷器, 表面贴装安装, 400 x 210 x 500mm5355 -
![]()
Category: surge protectionDescription: Phoenix Contact 275 V 交流 50kA 避雷器, 表面贴装安装, 400 x 210 x 500mm7414 -
![]()
Category: surge protectionDescription: DEHNventil 电涌放电器类型 1/2 基于类型 1 和 2 预接线火花间隙将雷电流和电涌放电器相结合，包括底座和插入式模块。 由于 RADAX 流量持续电流限制，可最大化系统可用性和可靠性 无跳闸 20amp gL/gG 熔丝，高达 50kA 的短路电流 放电容量 100kA，具有 10/350 微秒雷电波形 能够保护终端设备 工作状态和故障指示，底座中带指示器标志和/或可选远程触点 保护模块易于更换，由于锁定系统无需工具。 可与其他 Dehn Redline 产品配合使用，符合 BS7671 修订 1 ### 电涌保护设备，SPD（DIN 导轨） 电压浪涌经常被称为峰值或瞬态过压，它通常由开关荧光灯、熔丝烧断或附近的雷电活动造成。 最坏的电压浪涌通常由雷电造成，电压最高可达 6000V，且电流浪涌最高可超过 3000A。 由雷击导致的电压和电流浪涌最大值取决于建筑物布线系统内的位置。 BS7671：2011 年第一次修正版，第 443 和 534 部分涵盖风险评估，并提供电子设备保护指导，供安装工程师遵循。 BSEN 62305 标准系列可提供最全面的雷电和浪涌保护信息。31891+$21051.327010+$20859.951325+$20764.263550+$20668.5756100+$20572.8878150+$20477.1999250+$20381.5121500+$20285.8242 -
![]()
Category: surge protectionDescription: DEHNshield The pre wiring of the surge arrester module optimized for applications combines lightning current and surge arrester, and is used for TN-S systems based on spark gap. It is a space saving lightning arrester that combines lightning current and surge arrester, and is used for compact and simple electrical devices that have already been installed. It has reduced technical requirements to protect terminal equipment and provides a readily installable housing with a transparent cover, with a protection level of IP65. Surge protection equipment, SPD (DIN rail) voltage surge, is often referred to as peak or transient overvoltage, which is usually caused by turning off fluorescent lamps, fuse burnout, or nearby lightning activity. The worst voltage surges are usually caused by lightning, with voltages up to 6000V and current surges exceeding 3000A. The maximum value of voltage and current surges caused by lightning strikes depends on the location within the building's wiring system. BS7671: First revised edition in 2011, sections 443 and 534 cover risk assessment and provide guidance on electronic device protection for installation engineers to follow. The BSEN 62305 standard series provides the most comprehensive information on lightning and surge protection.7090 -
![]()
Category: surge protectionDescription: Phoenix Contact 528 V ac 100kA 避雷器, DIN 导轨安装, 106.8 x 71.5 x 95mm9120 -
![]()
Category: surge protectionDescription: DEHNshield The pre wiring of the surge arrester module optimized for applications combines lightning current and surge arrester, and is used for TN-S systems based on spark gap. It is a space saving lightning arrester that combines lightning current and surge arrester, and is used for compact and simple electrical devices that have already been installed. It has reduced technical requirements to protect terminal equipment and provides a readily installable housing with a transparent cover, with a protection level of IP65. Surge protection equipment, SPD (DIN rail) voltage surge, is often referred to as peak or transient overvoltage, which is usually caused by turning off fluorescent lamps, fuse burnout, or nearby lightning activity. The worst voltage surges are usually caused by lightning, with voltages up to 6000V and current surges exceeding 3000A. The maximum value of voltage and current surges caused by lightning strikes depends on the location within the building's wiring system. BS7671: First revised edition in 2011, sections 443 and 534 cover risk assessment and provide guidance on electronic device protection for installation engineers to follow. The BSEN 62305 standard series provides the most comprehensive information on lightning and surge protection.3647 -
![]()
Category: surge protectionDescription: DEHNshield 电涌放电器模块 为应用而优化的预接线将雷电流和电涌放电器相结合，用于 TN-S 系统 基于火花间隙的为应用而优化的预接线将雷电流和电涌放电器相结合 节省空间的避雷器，用于已安装的紧凑和简单的电气装置，具有降低的技术要求 能够保护终端设备 也提供可随时安装的外壳，带透明盖，保护等级达 IP65 ### 电涌保护设备，SPD（DIN 导轨） 电压浪涌经常被称为峰值或瞬态过压，它通常由开关荧光灯、熔丝烧断或附近的雷电活动造成。 最坏的电压浪涌通常由雷电造成，电压最高可达 6000V，且电流浪涌最高可超过 3000A。 由雷击导致的电压和电流浪涌最大值取决于建筑物布线系统内的位置。 BS7671：2011 年第一次修正版，第 443 和 534 部分涵盖风险评估，并提供电子设备保护指导，供安装工程师遵循。 BSEN 62305 标准系列可提供最全面的雷电和浪涌保护信息。3760 -
![]()
Category: surge protectionDescription: Phoenix Contact 528 V ac 50kA 避雷器, DIN 导轨安装, 71.2 x 71.5 x 95mm7931 -
![]()
Category: surge protectionDescription: UPS Network Management Cards Remote monitoring and control of an individual UPS by connecting it directly to the network Network Management Cards allow for secure monitoring and control of an individual APC UPS via web browser, command line interface, or SNMP Embedded technology provides exceptional reliability with notification features that inform you of problems as they occur For protected servers, the included PowerChute® Network Shutdown software provides graceful, unattended shutdown in the event of an extended power outage, always keeping business information safe Available for all UPS"s with SmartSlot™ Interface ### Accompanying CD with software, User Manual (Temperature Sensor 689-9143 only) # # # APC online86201+$5154.113810+$5107.258225+$5083.830450+$5060.4026100+$5036.9749150+$5013.5471250+$4990.1193500+$4966.6915 -
![]()
Category: surge protectionDescription: Phoenix Contact 264 V 交流 20kA 避雷器, DIN 导轨安装, 35.6 x 71.2 x 90mm3983 -
![]()
Category: surge protectionDescription: Bourns 1210 Series surge protection equipment with a maximum discharge current rating of 100 kA, multi pole single block design, DIN rail installation, integrated thermal disconnect visual fault indicator in accordance with UL 60691 standard, remote signal function, compact design, especially suitable for limited space surge protection equipment. SPD (DIN rail) voltage surge is often referred to as peak or transient overvoltage, which is usually caused by switch fluorescent lamps, fuse burnout, or nearby lightning activity. The worst voltage surges are usually caused by lightning, with voltages up to 6000V and current surges exceeding 3000A. The maximum value of voltage and current surges caused by lightning strikes depends on the location within the building's wiring system. BS7671: First revised edition in 2011, sections 443 and 534 cover risk assessment and provide guidance on electronic device protection for installation engineers to follow. The BSEN 62305 standard series provides the most comprehensive information on lightning and surge protection.61401+$3867.077510+$3831.922325+$3814.344650+$3796.7670100+$3779.1894150+$3761.6118250+$3744.0341500+$3726.4565 -
![]()
Category: surge protectionDescription: Phoenix Contact 440 V ac 50kA Surge arrester 2800116, DIN rail installation, 35.5 x 65.5 x 150mm62621+$3783.241010+$3748.847925+$3731.651450+$3714.4548100+$3697.2583150+$3680.0617250+$3662.8652500+$3645.6686 -
![]()
Category: surge protectionDescription: Phoenix Contact 4V 交流，6V 直流 10kA 电涌放电器保护模块 2801260, DIN 导轨安装, 17.7 x 77.5 x 109.3mm1707 -
![]()
Category: surge protectionDescription: DEHNshield The pre wiring of the surge arrester module optimized for applications combines lightning current and surge arrester, and is used for TN-S systems based on spark gap. It is a space saving lightning arrester that combines lightning current and surge arrester, and is used for compact and simple electrical devices that have already been installed. It has reduced technical requirements to protect terminal equipment and provides a readily installable housing with a transparent cover, with a protection level of IP65. Surge protection equipment, SPD (DIN rail) voltage surge, is often referred to as peak or transient overvoltage, which is usually caused by turning off fluorescent lamps, fuse burnout, or nearby lightning activity. The worst voltage surges are usually caused by lightning, with voltages up to 6000V and current surges exceeding 3000A. The maximum value of voltage and current surges caused by lightning strikes depends on the location within the building's wiring system. BS7671: First revised edition in 2011, sections 443 and 534 cover risk assessment and provide guidance on electronic device protection for installation engineers to follow. The BSEN 62305 standard series provides the most comprehensive information on lightning and surge protection.46211+$3732.113010+$3698.184725+$3681.220650+$3664.2564100+$3647.2923150+$3630.3281250+$3613.3640500+$3596.3998 -
![]()
Category: surge protectionDescription: Phoenix Contact 175 V ac 150kA 避雷器 2800673, DIN 导轨安装, 53.4 x 77.5 x 90mm1689 -
![]()
Category: surge protectionDescription: DEHNshield The pre wiring of the surge arrester module optimized for applications combines lightning current and surge arrester, and is used for TN-S systems based on spark gap. It is a space saving lightning arrester that combines lightning current and surge arrester, and is used for compact and simple electrical devices that have already been installed. It has reduced technical requirements to protect terminal equipment and provides a readily installable housing with a transparent cover, with a protection level of IP65. Surge protection equipment, SPD (DIN rail) voltage surge, is often referred to as peak or transient overvoltage, which is usually caused by turning off fluorescent lamps, fuse burnout, or nearby lightning activity. The worst voltage surges are usually caused by lightning, with voltages up to 6000V and current surges exceeding 3000A. The maximum value of voltage and current surges caused by lightning strikes depends on the location within the building's wiring system. BS7671: First revised edition in 2011, sections 443 and 534 cover risk assessment and provide guidance on electronic device protection for installation engineers to follow. The BSEN 62305 standard series provides the most comprehensive information on lightning and surge protection.40451+$3417.291910+$3386.225625+$3370.692550+$3355.1593100+$3339.6262150+$3324.0930250+$3308.5599500+$3293.0267 -
![]()
Category: surge protectionDescription: Surge Suppressor FLT-CP-PLUS-1S-35014311+$3339.893710+$3309.531025+$3294.349750+$3279.1684100+$3263.9870150+$3248.8057250+$3233.6244500+$3218.4430 -
![]()
Category: surge protectionDescription: Battery; 3.8in. (Max.) H x 10in. (Max.) W x 6in. (Max.) D5075 -
![]()
Category: surge protectionDescription: RF The equipment provides protection against lightning strikes or extremely high voltage pulses. Compact protection cost low universal connector interface broadband operation # # # Note includes gas membrane box, except for stock number 111-642, gas membrane box must be ordered separately, stock number 494-919 # # # Lightning arrester95031+$2763.970010+$2738.843025+$2726.279550+$2713.7160100+$2701.1525150+$2688.5890250+$2676.0255500+$2663.4620 -
![]()
Category: surge protectionDescription: APC RBC11 UPS Replacement Battery Cartridge #11 for SU2200X106, SU24XLBP, SU1400XLTNET - Black8323 -
![]()
Category: surge protectionDescription: Phoenix Contact 100 V dc, 250 V ac, 75 V ac 30kA Lightning arrester, DIN rail installation, 35.6 x 77.5 x 97mm65621+$2724.944210+$2700.172025+$2687.785950+$2675.3998100+$2663.0137150+$2650.6275250+$2638.2414500+$2625.8553 -
![]()
Category: surge protectionDescription: Phoenix Contact 260 V 交流 100kA 避雷器, DIN 导轨安装, 35.8 x 65.7 x 90mm2652 -
![]()
Category: surge protectionDescription: Bourns 1250 系列浪涌保护设备 50 kA 最大放电电流额定值 多极单块设计 DIN 导轨安装 符合 UL 60691 标准的集成热敏断开 可视故障指示器 远程信号功能 紧凑型设计，特别适用于有限的空间 ### 电涌保护设备，SPD（DIN 导轨） 电压浪涌经常被称为峰值或瞬态过压，它通常由开关荧光灯、熔丝烧断或附近的雷电活动造成。 最坏的电压浪涌通常由雷电造成，电压最高可达 6000V，且电流浪涌最高可超过 3000A。 由雷击导致的电压和电流浪涌最大值取决于建筑物布线系统内的位置。 BS7671：2011 年第一次修正版，第 443 和 534 部分涵盖风险评估，并提供电子设备保护指导，供安装工程师遵循。 BSEN 62305 标准系列可提供最全面的雷电和浪涌保护信息。5658 -
![]()
Category: surge protectionDescription: Phoenix Contact 260 V 交流 35kA 避雷器, DIN 导轨安装, 17.7 x 65.5 x 89.8mm7093 -
![]()
Category: surge protectionDescription: Phoenix Contact 4V 交流，6V 直流 10kA 电涌放电器保护模块 2801267, DIN 导轨安装, 17.7 x 77.5 x 109.3mm4024 -
![]()
Category: surge protectionDescription: 0.75A Twisted pair lightning arrester "4 pairs of enhanced surge protectors are suitable for twisted pair signal applications. The allowable voltage between all lines is very low and very low (1 Ω). The direct insertion resistor space is efficient, sturdy, flame-retardant, and the ABS shell has built-in DIN legs for top cap and G DIN connection, making it easy to install. The product can also use flat installation color coded terminals, which are detachable and easy to install through DIN rails or M5 screws. Grounding technical parameters: | * * ESP 06Q * * | * * ESP 15Q * * | * * ESP 30Q * * | * ESP 110Q * * | * * ESP RS485 Q * * * Maximum surge current * * | 10 kA | 10 kA | 10 kA | 10 kA * * Maximum rated voltage * * | 7.79 V | 18.8 V | 37.8 V | 132 V | 16.7 V * * Operating temperature range * * | -40 to+80 ° C | -40 to+80 ° C | -40 to+80 ° C | -40 to+80 ° C | -40 to+80 ° C * * Installation type * * | Top cap or G DIN rail or flat installation | Top cap or G DIN rail or flat installation | Top cap or G DIN rail or flat installation | Top cap or G DIN rail or flat installation | Top cap or G DIN rail or flat installation * * Size * * | 95 x 87 x 18 mm | 95 x 87 x 18 mm | 95 x 87 x 18 mm | 95 x 87 x 18 mm | 95 x 87 x 18 mm ** Attachment * * | WBX 4 | WBX 4 | WBX 4 | WBX 4 | WBX 4 # # # Recognized UK Oftel NS/G/1235/W/100025 # # # Transient Voltage Suppressor (Data Line)65591+$2623.338310+$2599.489825+$2587.565550+$2575.6412100+$2563.7170150+$2551.7927250+$2539.8684500+$2527.9442 -
![]()
Category: surge protectionDescription: Phoenix Contact 37V 交流，53V 直流 20kA 电涌放电器保护模块 2800987, DIN 导轨安装, 17.7 x 77.5 x 91.1mm7836 -
![]()
Category: surge protectionDescription: WJ Furse Enhanced surge protector for Ethernet systems, suitable for twisted pair Ethernet systems, with RJ45 connection. Suitable for shielded or unshielded twisted pair cables with very low allowable voltage between all lines, without system damage or startup signal attenuation, including detachable DIN rail clips, or flat installation | ESP Class 6 | ESP Class 6/PoE -------------------------------------------------------------------------------------------------------------------------------------------------15781+$2524.936710+$2501.982725+$2490.505750+$2479.0288100+$2467.5518150+$2456.0748250+$2444.5978500+$2433.1208
