Model/Brand/Package
Category/Description
Inventory
Price
Data
-
![]()
Category: Electronic monitorDescription: Display Development Tools uOLED-96G2 w/ uSD-2GB and uUSB-PA52088 -
![]()
Category: Electronic monitorDescription: Dev.kit: with display; TFT; 3.2"; 240x320; 257cd/m2; uC: DIABLO162409 -
![]()
Category: Electronic monitorDescription: 3.2 Entry kit for inch LCD display screen, designed for Raspberry Pi (gen4-uLCD-32DCT-CLB-PI). SK-gen4-32DCT-CLB-PI entry kit is launched by * * 4 D Systems * * and is specifically designed for Raspberry Pi (RS 896-8660). This kit features a 3.2-inch display module and an integrated Diablo 16 graphics controller that comes with some accessories. The Gen4 module features a capacitive touch display that allows you to explore the 4D Workshop4 environment and access all features to assist with the required applications. Through the * * designer * * environment, you can use all the functions of the display screen. Micro SD card is used for displaying images, videos, and sound. Data recording can be achieved through programming cables or adapters that allow downloading compiled code and PmmC/firmware updates. **The Visi * * and Visi Genie * * environments are similar environments, both based on images and require the use of a micro SD card and programming cable. **Once configured as a serial device, the serial environment no longer requires the use of a micro SD card or programming cable. However, it can be stored using a micro SD card and even changed to one of the other program environments. The * * 4 D Systems * * starter kit for gen4-uLCD-32DCT-PI can be used with 4D programming cables, uUSB-PA5-II, and 4D Arduino adapter Shield II. The kits for other accessories provide gen4 PA, gen4 IB, and 4D serial Pi adapters. **Boxed * * Gen4 Integrated Display Module: gen4-uLCD-32DCT Display with Capacitive Touch Function and Eyepiece Seat Ring 4D Serial Pi Adapter Gen4 Interface Module: gen4-IB Gen4 Programming Adapter: gen4-PA 4 GB Micro SD Card 150 mm FFC Cable: 5-way Female to Female Ribbon Cable, with Male to Male Adapter Quick Start Guide * * Function List * * Display Size: 3.2 Controller: Diablo16 Display Resolution: 240 x 320 Display Brightness: Approximately 304 nits Backlight LED: 1 x 6 Touch Function: Capacitive, with Eyepiece Seat Ring Connector: 30 way FPC Display Visual Area (mm): 64.8 x 48.6 Module Size (mm):6160 -
![]()
Category: Electronic monitorDescription: Starter Kit for Gen4-Ulcd-32Dct-Clb-Ar with 4D Arduino Adaptor Shield-Ii, Gen4-Ib, Gen4-Pa, 4GB Microsd Card, 150Mm Ffc Cable, 5-Way Female-to-Female Ribbon Cable with Male-to-Male Adaptor8306 -
![]()
Category: Electronic monitorDescription: Starter Kit for Gen4-Ulcd-32Dt-Ar with 4D Arduino Adaptor Shield-Ii, Gen4-Ib, Gen4-Pa, 4GB Microsd Card, 150Mm Ffc Cable, 5-Way Female-to-Female Ribbon Cable with Male-to-Male Adaptor5631 -
![]()
Category: Electronic monitorDescription: Display development tool Starter Kit for gen4-uLCD-32PT-AR3833 -
![]()
Category: Electronic monitorDescription: 4D Systems PMOLED Display starter kit with GOLDELOX processor, suitable for Arduino OLED display starter kit module series, used for Arduino provided by 4D Systems, providing users with everything they need to easily connect Arduino (using its serial port+one GPIO pin) and OLED module, eliminating wiring difficulties. Then, users can quickly start programming 4D Systems display modules through Arduino. This monitor is a secondary screen monitor and will not replace the monitor or TV used for programming Arduino itself. The monitor module GOLDELOX processor is supported by Arduino and can be programmed and configured using 4D Systems' Workshop4 IDE software (please refer to the data sheet for download instructions). The OLED module is configured to receive a wide range of serial commands from Arduino, such as display, shape, text, image, play sound, and record data to a MicroSD card. ###Features: The GOLDELOX processor is equipped with comprehensive 4DGL graphics and system library functions for user code, flash audio amplifier, speaker, microSD card socket, 2 GPIO pins, I2C and UART serial communication powered by Arduino. The kit includes OLED display module, 4D Arduino adapter, shielded uUSB-PA5 programming adapter, 4GB MicroSD card female to female 150mm, 5-way jumper cable, 5-way male to male adapter. Quick Start User Guide. Note: Arduino MCU module is not included. ###Passive matrix OLED display2951 -
![]()
Category: Electronic monitorDescription: Starter Kit for Gen4-Ulcd-50D-Clb-Sb-Pi with 4D Serial Pi Adaptor, Gen4-Ib, Gen4-Pa, 4GB Microsd Card, 150Mm Ffc Cable, 5-Way Female-to-Female Ribbon Cable with Male-to-Male Adaptor9113 -
![]()
Category: Electronic monitorDescription: Starter Kit for Gen4-Ulcd-24D-Pi with 4D Serial Pi Adaptor, Gen4-Ib, Gen4-Pa, 4GB Microsd Card, 150Mm Ffc Cable, 5-Way Female-to-Female Ribbon Cable with Male-to-Male Adaptor1371 -
![]()
Category: Electronic monitorDescription: Starter Kit for Gen4-Ulcd-70D-Ar with 4D Arduino Adaptor Shield-Ii, Gen4-Ib, Gen4-Pa, 4GB Microsd Card, 150Mm Ffc Cable, 5-Way Female-to-Female Ribbon Cable with Male-to-Male Adaptor4427 -
![]()
Category: Electronic monitorDescription: 7 Entry kit for inch LCD display screen, designed for Raspberry Pi (gen4-uLCD-70DT-PI) by * * 4 D Systems * * SK-gen4-70DT-PI. This kit features a 7.0 display module and an integrated Diablo 16 graphics controller, as well as multiple accessories. The Gen4 module features a resistive touch screen display, allowing you to explore the 4D Workshop4 environment and access all functions to assist the required applications. Through the * * designer * * environment, you can use all the functions of the display screen. Micro SD card is used for displaying images, videos, and sound. Data recording can be achieved through programming cables or adapters that allow downloading compiled code and PmmC/firmware updates. **The Visi * * and Visi Genie * * environments are similar environments, both based on images and require the use of a micro SD card and programming cable. **Once configured as a serial device, the serial environment no longer requires the use of a micro SD card or programming cable. However, it can be stored using a micro SD card and even changed to one of the other program environments. The * * 4 D Systems * * starter kit for gen4-uLCD-70DT-PI can be used with 4D programming cables, uUSB-PA5-II, and 4D Arduino adapter Shield II. The kits for other accessories provide gen4 PA, gen4 IB, and 4D serial Pi adapters. **Boxed * * Gen4 integrated display module: gen4-uLCD-70DT display screen, with resistive touch function 4D serial Pi adapter Gen4 interface module: gen4-IB Gen4 programming adapter: gen4-PA 4 GB micro SD card 150 mm FFC cable: 5-way female to female ribbon cable, with male to male adapter quick entry guide * * Function list * * Display screen size: 7.0 Controller: Diablo 16 Display resolution: 800 x 480 Display brightness: approximately 455 nits Backlight LED: 3 x 7 Touch screen: resistive connector: 30 way FPC Display visual area (mm): 154.08 x 85.94 Module size (mm): 187.0 x 102.1 x 8.3 Working environment temperature: -15 ° C to+65 ° C Storage temperature -30 ° C to+70 ° C # # # 4D Systems8312 -
![]()
Category: Electronic monitorDescription: Starter Kit for Gen4-Ulcd-24D-Ar with 4D Arduino Adaptor Shield-Ii, Gen4-Ib, Gen4-Pa, 4GB Microsd Card, 150Mm Ffc Cable, 5-Way Female-to-Female Ribbon Cable with Male-to-Male Adaptor7529 -
![]()
Category: Electronic monitorDescription: Display development tools Starter Kit for gen4-uLCD-43D-CLB-PI with 4D Serial Pi Adaptor, 4D-UPA , 4GB Industrial microSD Card, 150 mm FFC Cable, 5-way female-to-female ribbon cable with male-to-male adaptor8977 -
![]()
Category: Electronic monitorDescription: LCD SPI Beginner's kit for Arduino, 4D Systems 4D Systems SK-FT843-ADAM series. The starter kit includes a 4DLD-FT483 4.3-inch display module, black (9048534) or white (9048521) display bezel, splitter board, Arduino display adapter module (ADAM), and corner board. With this display module, you can connect to any SPI host. The display module also features an FT800 graphics controller with an embedded video engine (EVE) that provides high-quality graphics, software support, libraries, and presentations for your display screen. **The functions and advantages of LCD SPI display screen * * 480 x 272 pixel resolution up to 262k colors mono PWM audio output PWM dimming control power mode control standard 10 channels, 0.5 mm FPC ribbon programmable interrupt controller 64 voice polyphonic sound synthesizer size: 105 mm x 67.2 mm x 4.2 mm viewing area: 95.04 mm x 55.5 mm touch area: 96.07 mm x 55.5 mm flexible length: 57.51 mm suitable for 3.3 V power supply * * Seat ring * The plastic seat ring included in the kit comes with brass mounting inserts, 4 spring clips, and 8 M2 mounting screws and washers. Fixed components are also used as cover plates for display screens, allowing you to install the display screen onto the panel of the casing. **The splitter board can be used as an interface between SPI displays and host printed circuit boards or test circuit boards. **Arduino Display Adapter Module (ADAM) * * ADAM is a shielded board specifically designed for Arduino boards. Connect the interface between the SPI display and the Arduino board to immediately provide SPI display for the Arduino. ADAM also includes a microSD card - particularly suitable for storing and retrieving sound and images. ###4D Systems LCD Touch Screen6443 -
![]()
Category: Electronic monitorDescription: Starter Kit for Gen4-Ulcd-50Dt-Ar with 4D Arduino Adaptor Shield-Ii, Gen4-Ib, Gen4-Pa, 4GB Microsd Card, 150Mm Ffc Cable, 5-Way Female-to-Female Ribbon Cable with Male-to-Male Adaptor2997 -
![]()
Category: Electronic monitorDescription: Starter Kit for Gen4-Ulcd-50Dct-Clb-Sb-Pi with 4D Serial Pi Adaptor, Gen4-Ib, Gen4-Pa, 4GB Microsd Card, 150Mm Ffc Cable, 5-Way Female-to-Female Ribbon Cable with Male-to-Male Adaptor8517 -
![]()
Category: Electronic monitorDescription: 3.2 Entry kit for inch LCD display screen, for Raspberry Pi (gen4-uLCD-32DT-PI) Entry kit SK-gen4-32DT-PI, launched by * * 4 D Systems * *, designed for Raspberry Pi (see RS 896-8660). This kit provides a Diablo16 integrated 3.2-inch display module with various accessories included. The Gen4 uLCD module features a resistive touch display that allows you to explore the 4D Workshop4 environment, which facilitates access to all features of the application. Through the * * designer * * environment, you can use all the functions of the display screen. Provide a micro SD card that can be used to display images, videos, and sound. Data recording can be achieved through programming cables or adapters that allow downloading compiled code and PmmC/firmware updates. **The Visi * * and Visi Genie * * environments are similar environments, both based on images and require the use of a micro SD card and programming cable. **Once configured as a serial device, the serial environment no longer requires the use of a micro SD card or programming cable. However, it can be stored using a micro SD card and even changed to one of the other program environments. 3.2" The Diablo16 display module can be used in conjunction with 4D programming cables, uUSB-PA5-II, and 4D Arduino adapter Shield II. It is equipped with gen4 PA, gen4 IB, 4D serial Pi adapters, and other accessories. **Boxed Gen4 integrated display module: gen4-uLCD-32DT display screen with resistive touch function 4D serial Pi adapter Gen4 interface module: gen4-IB Gen4 programming adapter: gen4-PA 4 GB micro SD card 150 mm FFC cable: 5-way female to female ribbon cable, with male to male adapter quick entry guide * * Function list * * Display screen size: 3.2 Controller: Diablo 16 Display resolution: 240 x 320 Display brightness: approximately 257 nits Backlight LED: 1 x 6 Touch screen: resistive connector: 30 way FPC Display visual area (mm): 64.8 x 48.6 Module size (mm): 95.7 x 57.1 x 7.4 Working environment temperature: -15 ° C to+65 ° C Storage temperature: -30 °5030 -
![]()
Category: Electronic monitorDescription: Resistive Touch LCD SPI Starter Kit for Arduino, 4D Systems 4D Systems SK-FT843-ADAM Series Starter Kit includes 4DLD-FT483 4.3-inch display module, black (9048534) or white (9048521) display bezel, splitter board, Arduino Display Adapter Module (ADAM), and corner board. With this display module, you can connect to any SPI host. The display module also features an FT800 graphics controller with an embedded video engine (EVE) that provides high-quality graphics, software support, libraries, and presentations for your display screen. **The functions and advantages of LCD SPI display screen * * 480 x 272 pixel resolution up to 262k colors mono PWM audio output PWM dimming control power mode control standard 10 channels, 0.5 mm FPC ribbon programmable interrupt controller 64 voice polyphonic sound synthesizer size: 105 mm x 67.2 mm x 4.2 mm viewing area: 95.04 mm x 55.5 mm touch area: 96.07 mm x 55.5 mm flexible length: 57.51 mm suitable for 3.3 V power supply * * Seat ring * The plastic seat ring included in the kit comes with brass mounting inserts, 4 spring clips, and 8 M2 mounting screws and washers. Fixed components are also used as cover plates for display screens, allowing you to install the display screen onto the panel of the casing. **The splitter board can be used as an interface between SPI displays and host printed circuit boards or test circuit boards. **Arduino Display Adapter Module (ADAM) * * ADAM is a shielded board specifically designed for Arduino boards. Connect the interface between the SPI display and the Arduino board to immediately provide SPI display for the Arduino. ADAM also includes a microSD card - particularly suitable for storing and retrieving sound and images. ###4D Systems LCD Touch Screen1019 -
![]()
Category: Electronic monitorDescription: Display development tool 4.3 "; display w/FT800 EVE starter kit WHT2779 -
![]()
Category: Electronic monitorDescription: Starter Kit for Gen4-Ulcd-35D-Clb-Pi with 4D Serial Pi Adaptor, Gen4-Ib, Gen4-Pa, 4GB Microsd Card, 150Mm Ffc Cable, 5-Way Female-to-Female Ribbon Cable with Male-to-Male Adaptor6683 -
![]()
Category: Electronic monitorDescription: 4D Systems Armadillo, an entry-level kit for embedded computer display modules based on SK-Armadillo-43T Linux, is a display module that integrates a Linux based prototyping platform and color LCD into a single solution. LCD can provide a primary display screen and can be configured with Armadillo without the need for an external monitor. Armadillo is designed to utilize Armadillian, a Raspian based operating system that allows Armadillo to run most applications written for Raspberry Pi. Like the first generation Raspberry Pi board, Armadillo uses Broadcom BCM2835 SoC with 512 MB RAM. The color LCD touch screen can provide a 24 bit 4.3-inch display; A module with a 480 x 272 resolution display screen and 4-wire resistive touch. This entry-level kit model includes a microSD card pre installed with Armadillian. ###Features: Broadcom BCM2835 ARM11 core SoC with VideoCore IV GPU 512 MB SDRAM 4.3 480 x 272p resolution 24 bit color TFT screen, integrated 4-wire resistive touch panel PWM control display backlight PWM mono audio output 2 10 GPIO sockets, providing UART, SPI, and I2C channels 1 10 JTAG socket MicroSD flash card slot for boot loading of operating system and program storage Flexible power options - USB, 5 V DC socket or user button through GPIO 5 V pin - connected to GPIO reset input button Operating temperature range: -20 to+70 ° C 4 corner boards with 2.6 mm diameter mounting hole size: 120.7 x 69.6 x 16.5 mm (including corner board) List of items: Aramdillo-43T embedded computer with 4GB industrial microSD card, pre installed with Armadillian Quick Start User Guide # # # 4D Systems8897 -
![]()
Category: Electronic monitorDescription: Display Development Tools uOLED-128G2 w/ uSD-2GB and uUSB-PA58073 -
![]()
Category: Electronic monitorDescription: microOLED，With the GOLDELOX starter kit, 4D Systems RS offers three types of microOLED starter kits with embedded GOLDELOX graphics controllers - one kit with 0.96-inch (9028628) microOLED, one kit with 1.5-inch (9028583) microOLED, and another with 1.7-inch (9028596) microOLED. The GOLDELOX graphics controller includes multiple functions that allow you to display full-color images, animations, icons, and videos, driven by the Extended Virtual Engine (EVE). You also have access to * * Workshop4 IDE * * for software development and coding using 4DGL graphical language. **Features and advantages: * * * 0.96 inch microOLED starter kit * * Digital input/output features such as A/D converter, sound generation, RTTTL sound engine, joystick, buttons, and Dallas single line device size: 26 mm x 21 mm x 13.2 mm Display area: 20.1 mm x 13.4 mm 96 x 64 resolution up to 65k colors 10 KB flash memory 510 B RAM 1 asynchronous hardware serial port microSD memory card adapter supports Windows fonts and characters for 4.0 V to 5.5 V power backplane, with 4 x 3mm holes for installation * * 1.5 inch microOLED starter kit * * Digital input/output features such as A/D converter, sound generation RTTTL sound engine, joystick, buttons, and Dallas single line device size: 45.5 mm x 33.5 mm x 6.1 mm display area: 27 mm x 27 mm 128 x 128 resolution up to 65k colors 10 KB flash memory 510 B RAM 1 asynchronous hardware serial port microSD memory card adapter supports Windows fonts and characters for 4.0 V to 5.5 V power backplane, with 4 x 3mm holes for installation * * 1.7-inch microOLED starter kit * * digital input/output functions such as A/D converters, sound generation RTTTL sound engine, joystick, buttons, and Dallas single line device size: 52 mm x 32 mm x 6.1 mm display area: 33.6 mm x 27 mm 160 x 128 resolution up to 65k colors 10 KB flash memory 510 B RAM 1 asynchronous hardware serial port microSD memory card adapter supports Windows fonts and characters for 4.0 V to 5.5 V power backplane, with 4 x 3mm holes for installation * *6566
