Model/Brand/Package
Category/Description
Inventory
Price
Data
-
![]()
Category: RF receiverDescription: 2.4GHz 3 Mbps 18 dBm Surface mount Bluetooth v2.1 Class 1 module with antenna6899 -
![]()
Category: RF receiverDescription: RN1810/RN1810E 802.11b/g/n WiFi The Microchip RN1810 module is a low-power 2.4 GHz 802.11b/g/n WiFi module that combines all necessary components into a surface mount solution. RN1810 integrates TCP/IP network stack, encryption accelerator, power management subsystem, real-time clock, 2.4 GHz transceiver, and RF power amplifier. RN1810 helps to shorten development time. Integrated design provides certification solutions that eliminate the need for RF design regulations and compliance testing. In addition, RN1810 is easy to program due to its simple ASCII command language. The simplest configuration for RN1810 only requires power, ground, and UART Tx and Rx connections. Provide two models; RN1810， Equipped with an integrated printed circuit board tracking antenna, RN1810E， Equipped with a W.FL connector for external antennas. ###Features: Fully integrated low-power IEEE 802.11b/g/n WiFi module UART interface to host controller with simple ASCII command configuration for easy integration into final product printed circuit board tracking antenna (RN1810) or W.FL connector for external antenna (RN1810E) Compact surface mount module: 17.8 x 26.7 x 2.2 mm butterfly surface mount pad for reliable printed circuit board installation via FCC, IC, European R&D; TTE、 Australia/New Zealand, South Korea, Taiwan, and Japan certified RoHS compliant # # Low power feature Rx mode consumption: 64 mA (typical value) Tx mode consumption: 246 mA at 18 dBm (typical value) Power saving sleep mode: 12 μ A (typical value) # # WLAN (wireless local area network) - Microchip Technology1751 -
![]()
Category: RF receiverDescription: RFM119W The RF transmitter and RFM219SW RF receiver module RFM119W is a high-performance and highly flexible single-chip RF transmitter. It is based on direct synthesis of radio frequency. RFM219SW is a low-power, high-performance standalone RF receiver. Equipped with a built-in sleep timer for lower power consumption. Embedded EEPROM FSK, GFSK (Gaussian Frequency Shift Keying), and OOK (On/Off Key) modulation transmitter output power -10 to+13 dBm transmitter dual line interface receiver sensitivity: -109 dBm at 9.6 ksps receiver 4-line SPI interface supports receiver direct, buffer, and packet modes receiver configurable data processor and 32-bit FIFO receiver low power consumption 5.7 mA low sleep state current power supply voltage 1.8 V to 3.6 V transmitter module size 17.8 x 12.8 x 5 mm receiver module size 16 x 16 x 5 mm # # # Radio module - RF Solutions4395 -
![]()
Category: RF receiverDescription: LoRa™ Sub-1MHz Remote RF receiver module LoRa ™ The RF transceiver module has a Semtech SX1272 transceiver chip, which uses a Chirp spread spectrum encoding variant called LoRa to improve receiver sensitivity and achieve extended range. This module can also use OOK and FSK modulation schemes to maintain compatibility with other standards such as IEEE 802.15.4 and wMBUS. LoRa has higher anti-interference ability than traditional FSK and can provide enhanced coexistence capability in crowded channels. RF frequency range: 868MHz ISM band channel bandwidth: 125kHz, 250kHz, or 500kHz RF power output: up to+20dBm+14 dBm Efficient PA receiver sensitivity: -119dBm @ 1.2kbps (FSK), -137dBm @ 240bps (LoRa, SF=12, CR=4/8) Modulation: FSK, GFSK, MSK, GMSK, or OOK LoRa ™ Exhibition frequency technology OTA data transmission rate: up to 250kbps (FSK/OOK), up to 37.5kbps (LoRa) range: up to 16km (line of sight) data packet engine up to 256 bytes, with CRC forward error correction (FEC), optional encoding rate 127dB dynamic range RSSI host communication: serial SPI temperature sensor and low battery indicator power supply:+2.2V to+3.7V DC operating temperature range: 0 to+55 ° C size: 23 x 20 x 1.5mm applications: instrument reading, sensor networks, wireless alarms, home automation, remote communication for the Internet of Things (IoT) # # # Note that an external 50 Ω antenna is required. ###Recognized CE # # # Radio Module - RF Solutions7916 -
![]()
Category: RF receiverDescription: 2.8V 2.4GHz 2Mbps 20 dBm SMT RF Engine w/ F-Antenna & U.FL Connector4014 -
![]()
Category: RF receiverDescription: 16Bit microcontroller - MCU RL78/G1H 384KB/32KB 64QFN-40_+85C TRAY4236 -
![]()
Category: RF receiverDescription: RF transceiver, 2400MHz to 2483.5MHz, GFSK, 250Kbps, 4dBm output, -95dBm input, 1.8V to 3.6V, HVQFN-401910 -
![]()
Category: RF receiverDescription: BM78 The Microchip BM78 Bluetooth 4.2 dual-mode module is the Bluetooth version of the 4.2 dual-mode module, supporting BR/EDR and BLE communication. This module provides fully certified Bluetooth solutions without the need for RF design regulations and compliance testing, thereby reducing development time. BM78 supports GAP, SDP, SPP, and GATT configuration files. The data is transmitted through a transparent UART mode via Bluetooth connection, and the integration task between BM78 and the host MCU can be simplified by using the UART interface of this module. Module configuration can be completed through the use of a Windows compatible graphical user interface (GUI) or directly through the MCU. ###Features: Supports Bluetooth Classic (BR/EDR) and Bluetooth Low Energy (LE). Bluetooth Technology Alliance certified, fully Bluetooth stack, transparent UART mode, used for seamless transmission of serial data through UART interface. Easy to use Windows GUI or directly configure secure AES128 encryption GAP, SDP, SPP, GATT configuration files through MCU. Firmware can be upgraded on-site through UART. Compact surface mount module: 22 x 12 x 2.4 mm multiple input/output pins for control and status. # # Certificate FCC, R& TTE, IC, MIC, KCC, and NCC # # # Bluetooth - Microchip5499
