Model/Brand/Package
Category/Description
Inventory
Price
Data
-
![]()
Category: Classification of electronic componentsDescription:914210+$11.6652100+$11.0819500+$10.69311000+$10.67372000+$10.59595000+$10.49877500+$10.420910000+$10.3820 -
![]()
Category: Classification of electronic componentsDescription: Fujisoku Micro Rotary Switch - MR and MRE Series Micro Fujisoku MR and Waterproof MRE Rotary Switches are available in four poles: 1, 2, 3, or 4, with both 36 ° and 30 ° step angles available for position and number of steps. Self cleaning contacts provide high contact reliability, while soldering terminals are sealed with epoxy to prevent flux from entering. The waterproof MRE series rotary switches (stock numbers 225-593, 225-600, 225-616, 225-622, and 762-5669) are equipped with sealed O-rings to prevent water and dust from entering. These miniature rotary switches require a 6.5mm cut for panel installation, with a total length of 50/51mm (including wiring terminals) and a maximum body diameter of 16mm. Stock numbers 225-638, 225-644, 222-386, and 225-650 are suitable for panels with a maximum panel thickness of 2mm, while the rest of the MR series products are suitable for panels with a maximum thickness of 2.5mm. The waterproof MRE series is suitable for panels with a maximum panel thickness of 3.5mm. Four aluminum rotary knobs with a main body diameter of 12.7 mm, suitable for MR and MRE series rotary switches. There are two options, with a total height of 15.9 mm; inventory number 225-694 has a black body and white indicator line, while inventory number 225-688 has a silver body and black indicator line. The other two options have a body height of 20 mm, including stock number 225-672- black body with white indicator line, and stock number 225-666- silver body with black indicator line. Low contact resistance welding terminal insulation resistance: 100M Ω Minimum electrical life 10000 cycles Dielectric strength 500 V AC (30 ° MR series), 1000 V AC (36 ° MR and MRE series) (1 minute) Operating force 14.7 N.cm (30 ° MR series), 9.8 N.cm (36 ° MR and MRE series) Operating temperature range -10 to+65 ° C (30 ° MR series), -20 to+85 ° C Operating temperature range Electroplating * * 225-565 | MR1-10-Z | 1-pole | 10 position | 9 | 36 ° | 125 V AC, 500 mA maximum | Silver 762-5665 | MR1-10G-Z | 1-pole | 10 positi41211+$127.318810+$123.997450+$121.4511100+$120.5654200+$119.9011500+$119.01541000+$118.46182000+$117.9083 -
![]()
Category: Classification of electronic componentsDescription: Fujisoku Flip Switch - ATE Series Fuijsoku Miniature ATE Series Flip Switch features gold-plated contact points, allowing the switch to be used in many applications that require low switching currents as low as 1 μ A 20mV AC/DC. The PCB installation toggle switch certified by UL features an immersion washable structure and dual contact clamp, providing higher contact reliability. They also have a light touch function and a braking device. There are different types, including standard, flat, and locking rods, and single pole, double pole, and four pole contact configurations can be selected with alternating or momentary switching effects. Other options include straight, vertical, and right angle PCB mounting with pin spacing of 5.08 mm (0.2 ") or 7.62 mm (0.3"). The accessories for the ATE toggle switch include a glossy vinyl actuator cover (available in white, red, or black) and mounting bracket (suitable for straight PCB terminal models for ATE toggle switches). If the operating force of the switch actuator exceeds 12.7 N, it is recommended to use a bracket. For more detailed information, please refer to the table below. Direct, right angle or vertical through-hole PCB installation standard, flat or locking rod optional alternating or instant switching optional color actuator cover to suit your application terminal spacing meets standard PCB grid separation. The maximum switch rating is 50 mA at 48 V AC/DC and the minimum rating is 1 μ A at 20 mV AC/DC. The electrical life when immersed in washable gold-plated contacts is 10000 cycles. The maximum contact resistance is 50 m Ω, The maximum resistance of ATE4 and ATLE toggle switches is 100 m Ω, and the minimum insulation resistance is 500 M Ω. The dielectric strength is 250 V AC per minute, and the voltage of ATE4 and ATLE toggle switches is 500 V AC per minute. The operating temperature range is -20 to+85 ° C. Additional information for ATE single pole double throw toggle switches - * * Stock Number * * | Manufacturer Part Number * * | * Switch Operation * * | P29895+$31.902450+$30.5390200+$29.7756500+$29.58471000+$29.39382500+$29.17575000+$29.03947500+$28.9030 -
![]()
Category: Classification of electronic componentsDescription: Fujisoku LED Lighting and Non Lighting Button Switch - LP Series Fujisoku LP Series is a set of LED lighting and non lighting button switches that use momentary on/off or alternating on/off switching operation. There are various types of terminal blocks to choose from, including printed circuit board installation or soldering terminal blocks, and other options include square or rectangular seat rings with various button colors. The switch with welded terminal blocks is designed for panel installation, with the switch body fastened into the panel cut. The panel thickness ranges from 1 to 2.5mm, and the fixing ribs on the switch housing ensure tight fixation. The switches installed on the printed circuit board comply with the standard grid separation of the printed circuit board. The LP series LED lighting switch features high brightness LEDs and a two-piece lens, which includes a transparent plate and a color button. Both the transparent plate and button can be printed or engraved with symbol sheets to suit your application. The non illuminated switch comes with a color button that can also be printed or engraved. The Fujisoku LP switch is suitable for many applications that require a compact body button switch, with a bite mechanism that allows users to operate with just a gentle touch. Optional lighting or non lighting LED, with panel or printed circuit board installation options, and using alternating (push lock) or instantaneous switching operation single pole double throw or double pole double throw red, green or yellow high brightness LED silver plated or gold-plated contact interlocking mechanism. Silver contact - maximum switch rating of 3A at 30V DC and 125/250V AC, minimum value of 10mA gold contact - maximum switch rating of 50mA at 48V AC/DC, minimum rating of 0.1mA at 20mV AC/DC, maximum contact resistance of 50m Ω (silver contact), maximum value of 100M Ω (gold contact), dielectric strength of 1500V AC (1 minute), insulation resistance of minimum 100M Ω silver contact - Electrical lifespan 30000 time31011+$68.012210+$65.0551100+$64.5228250+$64.1088500+$63.45831000+$63.16262500+$62.74865000+$62.3938 -
![]()
Category: Classification of electronic componentsDescription: Fujisoku LED Lighting and Non Lighting Button Switch - LP Series Fujisoku LP Series is a set of LED lighting and non lighting button switches that use momentary on/off or alternating on/off switching operation. There are various types of terminal blocks to choose from, including printed circuit board installation or soldering terminal blocks, and other options include square or rectangular seat rings with various button colors. The switch with welded terminal blocks is designed for panel installation, with the switch body fastened into the panel cut. The panel thickness ranges from 1 to 2.5mm, and the fixing ribs on the switch housing ensure tight fixation. The switches installed on the printed circuit board comply with the standard grid separation of the printed circuit board. The LP series LED lighting switch features high brightness LEDs and a two-piece lens, which includes a transparent plate and a color button. Both the transparent plate and button can be printed or engraved with symbol sheets to suit your application. The non illuminated switch comes with a color button that can also be printed or engraved. The Fujisoku LP switch is suitable for many applications that require a compact body button switch, with a bite mechanism that allows users to operate with just a gentle touch. Optional lighting or non lighting LED, with panel or printed circuit board installation options, and using alternating (push lock) or instantaneous switching operation single pole double throw or double pole double throw red, green or yellow high brightness LED silver plated or gold-plated contact interlocking mechanism. Silver contact - maximum switch rating of 3A at 30V DC and 125/250V AC, minimum value of 10mA gold contact - maximum switch rating of 50mA at 48V AC/DC, minimum rating of 0.1mA at 20mV AC/DC, maximum contact resistance of 50m Ω (silver contact), maximum value of 100M Ω (gold contact), dielectric strength of 1500V AC (1 minute), insulation resistance of minimum 100M Ω silver contact - Electrical lifespan 30000 time91571+$52.429510+$49.4213100+$47.1866250+$46.8428500+$46.49901000+$46.11222500+$45.76845000+$45.5535 -
![]()
Category: Classification of electronic componentsDescription:513010+$10.7196100+$10.1836500+$9.82631000+$9.80842000+$9.73705000+$9.64767500+$9.576210000+$9.5404 -
![]()
Category: Classification of electronic componentsDescription: Fujisoku Flip Switch - ET Series Fujisoku ET Series Flip Switch offers optional single pole, double pole, three stage, and four pole contact configurations, with alternating or instantaneous switching function, and comes with. 250 "inserts, screws, or welded terminals. The features of ET Flip Switch include the use of self extinguishing UL94V-0 phenolic resin body material, which provides excellent arc resistance and anti tracking performance, with contact mechanism to ensure high reliability and reduce jitter/bounce time. The ET series toggle switch is designed for panel installation, with the switch body fitted into a 12.3mm diameter opening (without using a locking ring, 12.5mm using a locking ring), and a maximum panel thickness of 5.5mm. The ET toggle switch series includes various types of toggle switches, which can be used for various applications that require switching high power from 3A to 30A. The compatible accessories of this series include waterproof boots (available in gray, red, and black colors) and on/off nameplates, please refer to stock numbers 222-948, 222-932, 222-954, 222-910, and 222-926, respectively. High current rating -3A to 30A welding, screw or. 250 "plug terminal alternating or instantaneous switching (instantaneous switching, using only bipolar and three pole toggle switches). The maximum contact resistance of 3A rated switches (stock numbers 398-225, 762-5384 and 762-5388) is 30m Ω, and the maximum contact resistance of all other ET toggle switches is 20m Ω. Dielectric strength 1500 V AC (1 minute) Insulation resistance minimum 100M Ω. Additional information - Single pole ET series toggle switches - * * Stock number * * | * Manufacturer part number * * | * * Contact * * | * * Switch operation * * | * * Rated value * * | * * Terminal type * * | * * Electrical life * * | * * Certification * 398-225 | ET103A 12-Z | Single pole single throw | Open close | 3A @ 125V AC | Solder joint | 10000 operations | UL, CSA 762-5384 | ET103A32-Z | Single pole single throw | Open close | 3A @ 125V C51901+$80.322910+$76.8306100+$76.2020250+$75.7131500+$74.94481000+$74.59552500+$74.10665000+$73.6875 -
![]()
Category: Classification of electronic componentsDescription: Fujisoku Flip Switch - ATE Series Fuijsoku Miniature ATE Series Flip Switch features gold-plated contact points, allowing the switch to be used in many applications that require low switching currents as low as 1 μ A 20mV AC/DC. The PCB installation toggle switch certified by UL features an immersion washable structure and dual contact clamp, providing higher contact reliability. They also have a light touch function and a braking device. There are different types, including standard, flat, and locking rods, and single pole, double pole, and four pole contact configurations can be selected with alternating or momentary switching effects. Other options include straight, vertical, and right angle PCB mounting with pin spacing of 5.08 mm (0.2 ") or 7.62 mm (0.3"). The accessories for the ATE toggle switch include a glossy vinyl actuator cover (available in white, red, or black) and mounting bracket (suitable for straight PCB terminal models for ATE toggle switches). If the operating force of the switch actuator exceeds 12.7 N, it is recommended to use a bracket. For more detailed information, please refer to the table below. Direct, right angle or vertical through-hole PCB installation standard, flat or locking rod optional alternating or instant switching optional color actuator cover to suit your application terminal spacing meets standard PCB grid separation. The maximum switch rating is 50 mA at 48 V AC/DC and the minimum rating is 1 μ A at 20 mV AC/DC. The electrical life when immersed in washable gold-plated contacts is 10000 cycles. The maximum contact resistance is 50 m Ω, The maximum resistance of ATE4 and ATLE toggle switches is 100 m Ω, and the minimum insulation resistance is 500 M Ω. The dielectric strength is 250 V AC per minute, and the voltage of ATE4 and ATLE toggle switches is 500 V AC per minute. The operating temperature range is -20 to+85 ° C. Additional information for ATE single pole double throw toggle switches - * * Stock Number * * | Manufacturer Part Number * * | * Switch Operation * * | P11725+$27.891650+$26.6997200+$26.0322500+$25.86531000+$25.69842500+$25.50775000+$25.38857500+$25.2693 -
![]()
Category: Classification of electronic componentsDescription: Fujisoku Micro sliding switches - AS and ASE series Fuijsoku Micro AS and ASE series sliding switches have gold-plated contact points, making these sliding switches suitable for various applications that require switching currents as low as 1 μ A 20mV AC/DC. They have a miniature body profile, can be configured with single pole double throw or double pole double throw contacts, can be installed on straight or right angle printed circuit boards, have pin spacing of 2.54mm, 5.08mm, 7.62mm, and are suitable for various printed circuit board installation heights. The AS and ASE series have light operated touch and dual contact clamping mechanisms, providing higher contact reliability. The ASE series sliding switch has passed UL certification, with a immersion structure and a protective cover. The maximum switch rating for the 0.2 "and 0.3" pitch options in the straight or right angle direction is 0.5A at 48V AC/DC, with a minimum rating of 1 μ A. The electrical life for 20mV AC/DC at the maximum rating is 10000 cycles, and at the minimum rating is 50000 cycles. Operating force of 0.69 to 4.9N (AS series) Contact resistance maximum 50m Ω Minimum insulation resistance 500M Ω Dielectric strength 250 V AC (1 minute) Operating temperature range -20 to+85 ° C Additional information - * * Stock number * * | * Manufacturer part number * * | * Switch operation * * | * Number of poles * * | * Rated value * * | * Printed circuit board terminal type * * | * Installation/pitch * * 762-5072 | ASD-D-2M-10-Z | Connect Connect Connect | 1 | Maximum 48V AC/DC 50mA | Direct | Installation height: 12.3mm; Pitch: 2.54mm 762-5079 | ASSE-2M-10-Z | Connect Disconnect Connect | 1 | Maximum 48V AC/DC 50mA | Straight | Installation height: 12.3mm; Pitch: 2.54mm 762-5085 | AS2D-2M-10-Z | Connect Connect | 2 | Maximum 48V AC/DC 50mA | Straight | Installation height: 12.3mm; Pitch: 2.54mm 762-5088 | ASSE-5M-10-Z| Connect Disconnect Connect | 1 | Maximum 48V AC/DC 50mA | Right Angle | Installation Height: 3.10mm; Pitch: 5.08mm 762-5094 | AS2D-5M-141265+$28.198250+$26.9931200+$26.3183500+$26.14961000+$25.98092500+$25.78815000+$25.66767500+$25.5471 -
![]()
Category: Classification of electronic componentsDescription:38531+$48.094810+$45.3353100+$43.2854250+$42.9700500+$42.65461000+$42.29982500+$41.98445000+$41.7873 -
![]()
Category: Classification of electronic componentsDescription: Fujisoku Flip Switch - ATE Series Fuijsoku Miniature ATE Series Flip Switch features gold-plated contact points, allowing the switch to be used in many applications that require low switching currents as low as 1 μ A 20mV AC/DC. The PCB installation toggle switch certified by UL features an immersion washable structure and dual contact clamp, providing higher contact reliability. They also have a light touch function and a braking device. There are different types, including standard, flat, and locking rods, and single pole, double pole, and four pole contact configurations can be selected with alternating or momentary switching effects. Other options include straight, vertical, and right angle PCB mounting with pin spacing of 5.08 mm (0.2 ") or 7.62 mm (0.3"). The accessories for the ATE toggle switch include a glossy vinyl actuator cover (available in white, red, or black) and mounting bracket (suitable for straight PCB terminal models for ATE toggle switches). If the operating force of the switch actuator exceeds 12.7 N, it is recommended to use a bracket. For more detailed information, please refer to the table below. Direct, right angle or vertical through-hole PCB installation standard, flat or locking rod optional alternating or instant switching optional color actuator cover to suit your application terminal spacing meets standard PCB grid separation. The maximum switch rating is 50 mA at 48 V AC/DC and the minimum rating is 1 μ A at 20 mV AC/DC. The electrical life when immersed in washable gold-plated contacts is 10000 cycles. The maximum contact resistance is 50 m Ω, The maximum resistance of ATE4 and ATLE toggle switches is 100 m Ω, and the minimum insulation resistance is 500 M Ω. The dielectric strength is 250 V AC per minute, and the voltage of ATE4 and ATLE toggle switches is 500 V AC per minute. The operating temperature range is -20 to+85 ° C. Additional information for ATE single pole double throw toggle switches - * * Stock Number * * | Manufacturer Part Number * * | * Switch Operation * * | P81921+$45.551110+$42.9376100+$40.9960250+$40.6973500+$40.39861000+$40.06262500+$39.76395000+$39.5772 -
![]()
Category: Classification of electronic componentsDescription: Fujisoku Flip Switch - ATE Series Fuijsoku Miniature ATE Series Flip Switch features gold-plated contact points, allowing the switch to be used in many applications that require low switching currents as low as 1 μ A 20mV AC/DC. The PCB installation toggle switch certified by UL features an immersion washable structure and dual contact clamp, providing higher contact reliability. They also have a light touch function and a braking device. There are different types, including standard, flat, and locking rods, and single pole, double pole, and four pole contact configurations can be selected with alternating or momentary switching effects. Other options include straight, vertical, and right angle PCB mounting with pin spacing of 5.08 mm (0.2 ") or 7.62 mm (0.3"). The accessories for the ATE toggle switch include a glossy vinyl actuator cover (available in white, red, or black) and mounting bracket (suitable for straight PCB terminal models for ATE toggle switches). If the operating force of the switch actuator exceeds 12.7 N, it is recommended to use a bracket. For more detailed information, please refer to the table below. Direct, right angle or vertical through-hole PCB installation standard, flat or locking rod optional alternating or instant switching optional color actuator cover to suit your application terminal spacing meets standard PCB grid separation. The maximum switch rating is 50 mA at 48 V AC/DC and the minimum rating is 1 μ A at 20 mV AC/DC. The electrical life when immersed in washable gold-plated contacts is 10000 cycles. The maximum contact resistance is 50 m Ω, The maximum resistance of ATE4 and ATLE toggle switches is 100 m Ω, and the minimum insulation resistance is 500 M Ω. The dielectric strength is 250 V AC per minute, and the voltage of ATE4 and ATLE toggle switches is 500 V AC per minute. The operating temperature range is -20 to+85 ° C. Additional information for ATE single pole double throw toggle switches - * * Stock Number * * | Manufacturer Part Number * * | * Switch Operation * * | P37925+$19.760150+$18.9157200+$18.4428500+$18.32461000+$18.20632500+$18.07125000+$17.98687500+$17.9023 -
![]()
Category: Classification of electronic componentsDescription: Fujisoku Flip Switch - ATE Series Fuijsoku Miniature ATE Series Flip Switch features gold-plated contact points, allowing the switch to be used in many applications that require low switching currents as low as 1 μ A 20mV AC/DC. The PCB installation toggle switch certified by UL features an immersion washable structure and dual contact clamp, providing higher contact reliability. They also have a light touch function and a braking device. There are different types, including standard, flat, and locking rods, and single pole, double pole, and four pole contact configurations can be selected with alternating or momentary switching effects. Other options include straight, vertical, and right angle PCB mounting with pin spacing of 5.08 mm (0.2 ") or 7.62 mm (0.3"). The accessories for the ATE toggle switch include a glossy vinyl actuator cover (available in white, red, or black) and mounting bracket (suitable for straight PCB terminal models for ATE toggle switches). If the operating force of the switch actuator exceeds 12.7 N, it is recommended to use a bracket. For more detailed information, please refer to the table below. Direct, right angle or vertical through-hole PCB installation standard, flat or locking rod optional alternating or instant switching optional color actuator cover to suit your application terminal spacing meets standard PCB grid separation. The maximum switch rating is 50 mA at 48 V AC/DC and the minimum rating is 1 μ A at 20 mV AC/DC. The electrical life when immersed in washable gold-plated contacts is 10000 cycles. The maximum contact resistance is 50 m Ω, The maximum resistance of ATE4 and ATLE toggle switches is 100 m Ω, and the minimum insulation resistance is 500 M Ω. The dielectric strength is 250 V AC per minute, and the voltage of ATE4 and ATLE toggle switches is 500 V AC per minute. The operating temperature range is -20 to+85 ° C. Additional information for ATE single pole double throw toggle switches - * * Stock Number * * | Manufacturer Part Number * * | * Switch Operation * * | P11221+$61.793010+$59.1063100+$58.6227250+$58.2466500+$57.65551000+$57.38682500+$57.01075000+$56.6883 -
![]()
Category: Classification of electronic componentsDescription: Fujisoku MRK The Fujisoku MRK series key switches are designed for many low-voltage switch applications. The single pole Fuijsoku MRK key switch can be installed on a straight or right angle printed circuit board, with versions including recessed (the key cannot be removed from one or two positions) or non recessed (the key can be removed from all positions). The three position key switch has a 45 ° indication angle, while the two position key switch has a 90 ° indication angle. All versions have: steel ball mechanism - providing a clear sense of click operation, self-cleaning contacts - providing high contact reliability, 2.54 x 2.54 mm (. 100 "x. 100") terminal spacing - compliant with standard printed circuit board grid separation. Maximum switch rated value 0.4 VA (at 20 V DC) gold-plated contact resistance 200m Ω maximum insulation resistance 100 M Ω minimum electrical life 10000 cycles operating force 2.94 N.cm dielectric strength 250 V AC (1 minute) -20 to+70 ° C operating temperature range Additional information - * * Stock number * * | * Manufacturer part number * * | * * Switch operation * * | * * Key withdrawable position * * | * * Key angle * * | * Printed circuit board terminal type * * 225-521 | MRK1031D-Z | Connect Connect Connect Connect Connect | O-O | 45 ° | Direct 225-559 | MRK1031D-R-Z | Connect Connect Connect Connect Connect Connect | O-O | 45 ° | Right angle 762-5678 | MRK1031G-Z | Connect Connect Connect Connect | O-X | 45 ° | Straight 762-5675 | MRK1031L-Z | Connect Connect Connect Connect | X-O-X | 45 ° | Straight 762-5671 | MRK1031L-R-Z| Connect Connect Connect | X-O-X | 45 ° | Right angle 225-509 | MRK1012A-Z | Connect Connect Connect | O-O | 90 ° | Straight 225-537 | MRK1012A-R-Z | Connect Connect Connect | O-O | 90 ° | Right angle 225-515 | MRK1012B-Z | Connect Connect Connect | O-X | 90 ° | Straight 225-543 | MRK1012B-R-Z | Connect Connect Connect | O-X | 90 ° | Right angle O=Key can be removed; X=Key cannot be removed # # # Note that each Fuijsoku MRK key switch comes with two keys81171+$59.489610+$56.0763100+$53.5407250+$53.1506500+$52.76051000+$52.32162500+$51.93155000+$51.6877 -
![]()
Category: Classification of electronic componentsDescription: Fujisoku Flip Switch - ATE Series Fuijsoku Miniature ATE Series Flip Switch features gold-plated contact points, allowing the switch to be used in many applications that require low switching currents as low as 1 μ A 20mV AC/DC. The PCB installation toggle switch certified by UL features an immersion washable structure and dual contact clamp, providing higher contact reliability. They also have a light touch function and a braking device. There are different types, including standard, flat, and locking rods, and single pole, double pole, and four pole contact configurations can be selected with alternating or momentary switching effects. Other options include straight, vertical, and right angle PCB mounting with pin spacing of 5.08 mm (0.2 ") or 7.62 mm (0.3"). The accessories for the ATE toggle switch include a glossy vinyl actuator cover (available in white, red, or black) and mounting bracket (suitable for straight PCB terminal models for ATE toggle switches). If the operating force of the switch actuator exceeds 12.7 N, it is recommended to use a bracket. For more detailed information, please refer to the table below. Direct, right angle or vertical through-hole PCB installation standard, flat or locking rod optional alternating or instant switching optional color actuator cover to suit your application terminal spacing meets standard PCB grid separation. The maximum switch rating is 50 mA at 48 V AC/DC and the minimum rating is 1 μ A at 20 mV AC/DC. The electrical life when immersed in washable gold-plated contacts is 10000 cycles. The maximum contact resistance is 50 m Ω, The maximum resistance of ATE4 and ATLE toggle switches is 100 m Ω, and the minimum insulation resistance is 500 M Ω. The dielectric strength is 250 V AC per minute, and the voltage of ATE4 and ATLE toggle switches is 500 V AC per minute. The operating temperature range is -20 to+85 ° C. Additional information for ATE single pole double throw toggle switches - * * Stock Number * * | Manufacturer Part Number * * | * Switch Operation * * | P89435+$28.848750+$27.6158200+$26.9254500+$26.75281000+$26.58022500+$26.38305000+$26.25977500+$26.1364 -
![]()
Category: Classification of electronic componentsDescription: Fujisoku Flip Switch - ATE Series Fuijsoku Miniature ATE Series Flip Switch features gold-plated contact points, allowing the switch to be used in many applications that require low switching currents as low as 1 μ A 20mV AC/DC. The PCB installation toggle switch certified by UL features an immersion washable structure and dual contact clamp, providing higher contact reliability. They also have a light touch function and a braking device. There are different types, including standard, flat, and locking rods, and single pole, double pole, and four pole contact configurations can be selected with alternating or momentary switching effects. Other options include straight, vertical, and right angle PCB mounting with pin spacing of 5.08 mm (0.2 ") or 7.62 mm (0.3"). The accessories for the ATE toggle switch include a glossy vinyl actuator cover (available in white, red, or black) and mounting bracket (suitable for straight PCB terminal models for ATE toggle switches). If the operating force of the switch actuator exceeds 12.7 N, it is recommended to use a bracket. For more detailed information, please refer to the table below. Direct, right angle or vertical through-hole PCB installation standard, flat or locking rod optional alternating or instant switching optional color actuator cover to suit your application terminal spacing meets standard PCB grid separation. The maximum switch rating is 50 mA at 48 V AC/DC and the minimum rating is 1 μ A at 20 mV AC/DC. The electrical life when immersed in washable gold-plated contacts is 10000 cycles. The maximum contact resistance is 50 m Ω, The maximum resistance of ATE4 and ATLE toggle switches is 100 m Ω, and the minimum insulation resistance is 500 M Ω. The dielectric strength is 250 V AC per minute, and the voltage of ATE4 and ATLE toggle switches is 500 V AC per minute. The operating temperature range is -20 to+85 ° C. Additional information for ATE single pole double throw toggle switches - * * Stock Number * * | Manufacturer Part Number * * | * Switch Operation * * | P49771+$45.720710+$43.0974100+$41.1486250+$40.8488500+$40.54901000+$40.21172500+$39.91195000+$39.7246 -
![]()
Category: Classification of electronic componentsDescription: Fujisoku LED Lighting and Non Lighting Button Switch - LP Series Fujisoku LP Series is a set of LED lighting and non lighting button switches that use momentary on/off or alternating on/off switching operation. There are various types of terminal blocks to choose from, including printed circuit board installation or soldering terminal blocks, and other options include square or rectangular seat rings with various button colors. The switch with welded terminal blocks is designed for panel installation, with the switch body fastened into the panel cut. The panel thickness ranges from 1 to 2.5mm, and the fixing ribs on the switch housing ensure tight fixation. The switches installed on the printed circuit board comply with the standard grid separation of the printed circuit board. The LP series LED lighting switch features high brightness LEDs and a two-piece lens, which includes a transparent plate and a color button. Both the transparent plate and button can be printed or engraved with symbol sheets to suit your application. The non illuminated switch comes with a color button that can also be printed or engraved. The Fujisoku LP switch is suitable for many applications that require a compact body button switch, with a bite mechanism that allows users to operate with just a gentle touch. Optional lighting or non lighting LED, with panel or printed circuit board installation options, and using alternating (push lock) or instantaneous switching operation single pole double throw or double pole double throw red, green or yellow high brightness LED silver plated or gold-plated contact interlocking mechanism. Silver contact - maximum switch rating of 3A at 30V DC and 125/250V AC, minimum value of 10mA gold contact - maximum switch rating of 50mA at 48V AC/DC, minimum rating of 0.1mA at 20mV AC/DC, maximum contact resistance of 50m Ω (silver contact), maximum value of 100M Ω (gold contact), dielectric strength of 1500V AC (1 minute), insulation resistance of minimum 100M Ω silver contact - Electrical lifespan 30000 time40731+$56.105410+$52.8862100+$50.4948250+$50.1269500+$49.75901000+$49.34512500+$48.97725000+$48.7473 -
![]()
Category: Classification of electronic componentsDescription: Fujisoku LED Lighting and Non Lighting Button Switch - LP Series Fujisoku LP Series is a set of LED lighting and non lighting button switches that use momentary on/off or alternating on/off switching operation. There are various types of terminal blocks to choose from, including printed circuit board installation or soldering terminal blocks, and other options include square or rectangular seat rings with various button colors. The switch with welded terminal blocks is designed for panel installation, with the switch body fastened into the panel cut. The panel thickness ranges from 1 to 2.5mm, and the fixing ribs on the switch housing ensure tight fixation. The switches installed on the printed circuit board comply with the standard grid separation of the printed circuit board. The LP series LED lighting switch features high brightness LEDs and a two-piece lens, which includes a transparent plate and a color button. Both the transparent plate and button can be printed or engraved with symbol sheets to suit your application. The non illuminated switch comes with a color button that can also be printed or engraved. The Fujisoku LP switch is suitable for many applications that require a compact body button switch, with a bite mechanism that allows users to operate with just a gentle touch. Optional lighting or non lighting LED, with panel or printed circuit board installation options, and using alternating (push lock) or instantaneous switching operation single pole double throw or double pole double throw red, green or yellow high brightness LED silver plated or gold-plated contact interlocking mechanism. Silver contact - maximum switch rating of 3A at 30V DC and 125/250V AC, minimum value of 10mA gold contact - maximum switch rating of 50mA at 48V AC/DC, minimum rating of 0.1mA at 20mV AC/DC, maximum contact resistance of 50m Ω (silver contact), maximum value of 100M Ω (gold contact), dielectric strength of 1500V AC (1 minute), insulation resistance of minimum 100M Ω silver contact - Electrical lifespan 30000 time32181+$47.038310+$44.3394100+$42.3345250+$42.0260500+$41.71761000+$41.37062500+$41.06215000+$40.8694 -
![]()
Category: Classification of electronic componentsDescription: Fujisoku Flip Switch - ET Series Fujisoku ET Series Flip Switch offers optional single pole, double pole, three stage, and four pole contact configurations, with alternating or instantaneous switching function, and comes with. 250 "inserts, screws, or welded terminals. The features of ET Flip Switch include the use of self extinguishing UL94V-0 phenolic resin body material, which provides excellent arc resistance and anti tracking performance, with contact mechanism to ensure high reliability and reduce jitter/bounce time. The ET series toggle switch is designed for panel installation, with the switch body fitted into a 12.3mm diameter opening (without using a locking ring, 12.5mm using a locking ring), and a maximum panel thickness of 5.5mm. The ET toggle switch series includes various types of toggle switches, which can be used for various applications that require switching high power from 3A to 30A. The compatible accessories of this series include waterproof boots (available in gray, red, and black colors) and on/off nameplates, please refer to stock numbers 222-948, 222-932, 222-954, 222-910, and 222-926, respectively. High current rating -3A to 30A welding, screw or. 250 "plug terminal alternating or instantaneous switching (instantaneous switching, using only bipolar and three pole toggle switches). The maximum contact resistance of 3A rated switches (stock numbers 398-225, 762-5384 and 762-5388) is 30m Ω, and the maximum contact resistance of all other ET toggle switches is 20m Ω. Dielectric strength 1500 V AC (1 minute) Insulation resistance minimum 100M Ω. Additional information - Single pole ET series toggle switches - * * Stock number * * | * Manufacturer part number * * | * * Contact * * | * * Switch operation * * | * * Rated value * * | * * Terminal type * * | * * Electrical life * * | * * Certification * 398-225 | ET103A 12-Z | Single pole single throw | Open close | 3A @ 125V AC | Solder joint | 10000 operations | UL, CSA 762-5384 | ET103A32-Z | Single pole single throw | Open close | 3A @ 125V C72741+$75.702210+$72.4108100+$71.8183250+$71.3576500+$70.63341000+$70.30432500+$69.84355000+$69.4485 -
![]()
Category: Classification of electronic componentsDescription: Fujisoku Flip Switch - ET Series Fujisoku ET Series Flip Switch offers optional single pole, double pole, three stage, and four pole contact configurations, with alternating or instantaneous switching function, and comes with. 250 "inserts, screws, or welded terminals. The features of ET Flip Switch include the use of self extinguishing UL94V-0 phenolic resin body material, which provides excellent arc resistance and anti tracking performance, with contact mechanism to ensure high reliability and reduce jitter/bounce time. The ET series toggle switch is designed for panel installation, with the switch body fitted into a 12.3mm diameter opening (without using a locking ring, 12.5mm using a locking ring), and a maximum panel thickness of 5.5mm. The ET toggle switch series includes various types of toggle switches, which can be used for various applications that require switching high power from 3A to 30A. The compatible accessories of this series include waterproof boots (available in gray, red, and black colors) and on/off nameplates, please refer to stock numbers 222-948, 222-932, 222-954, 222-910, and 222-926, respectively. High current rating -3A to 30A welding, screw or. 250 "plug terminal alternating or instantaneous switching (instantaneous switching, using only bipolar and three pole toggle switches). The maximum contact resistance of 3A rated switches (stock numbers 398-225, 762-5384 and 762-5388) is 30m Ω, and the maximum contact resistance of all other ET toggle switches is 20m Ω. Dielectric strength 1500 V AC (1 minute) Insulation resistance minimum 100M Ω. Additional information - Single pole ET series toggle switches - * * Stock number * * | * Manufacturer part number * * | * * Contact * * | * * Switch operation * * | * * Rated value * * | * * Terminal type * * | * * Electrical life * * | * * Certification * 398-225 | ET103A 12-Z | Single pole single throw | Open close | 3A @ 125V AC | Solder joint | 10000 operations | UL, CSA 762-5384 | ET103A32-Z | Single pole single throw | Open close | 3A @ 125V C27551+$38.504410+$36.2952100+$34.6540250+$34.4015500+$34.14901000+$33.86502500+$33.61255000+$33.4547 -
![]()
Category: Classification of electronic componentsDescription: Fujisoku Flip Switch - ATE Series Fuijsoku Miniature ATE Series Flip Switch features gold-plated contact points, allowing the switch to be used in many applications that require low switching currents as low as 1 μ A 20mV AC/DC. The PCB installation toggle switch certified by UL features an immersion washable structure and dual contact clamp, providing higher contact reliability. They also have a light touch function and a braking device. There are different types, including standard, flat, and locking rods, and single pole, double pole, and four pole contact configurations can be selected with alternating or momentary switching effects. Other options include straight, vertical, and right angle PCB mounting with pin spacing of 5.08 mm (0.2 ") or 7.62 mm (0.3"). The accessories for the ATE toggle switch include a glossy vinyl actuator cover (available in white, red, or black) and mounting bracket (suitable for straight PCB terminal models for ATE toggle switches). If the operating force of the switch actuator exceeds 12.7 N, it is recommended to use a bracket. For more detailed information, please refer to the table below. Direct, right angle or vertical through-hole PCB installation standard, flat or locking rod optional alternating or instant switching optional color actuator cover to suit your application terminal spacing meets standard PCB grid separation. The maximum switch rating is 50 mA at 48 V AC/DC and the minimum rating is 1 μ A at 20 mV AC/DC. The electrical life when immersed in washable gold-plated contacts is 10000 cycles. The maximum contact resistance is 50 m Ω, The maximum resistance of ATE4 and ATLE toggle switches is 100 m Ω, and the minimum insulation resistance is 500 M Ω. The dielectric strength is 250 V AC per minute, and the voltage of ATE4 and ATLE toggle switches is 500 V AC per minute. The operating temperature range is -20 to+85 ° C. Additional information for ATE single pole double throw toggle switches - * * Stock Number * * | Manufacturer Part Number * * | * Switch Operation * * | P40341+$60.702810+$58.0635100+$57.5884250+$57.2189500+$56.63831000+$56.37442500+$56.00495000+$55.6882 -
![]()
Category: Classification of electronic componentsDescription: Fujisoku Flip Switch - ATE Series Fuijsoku Miniature ATE Series Flip Switch features gold-plated contact points, allowing the switch to be used in many applications that require low switching currents as low as 1 μ A 20mV AC/DC. The PCB installation toggle switch certified by UL features an immersion washable structure and dual contact clamp, providing higher contact reliability. They also have a light touch function and a braking device. There are different types, including standard, flat, and locking rods, and single pole, double pole, and four pole contact configurations can be selected with alternating or momentary switching effects. Other options include straight, vertical, and right angle PCB mounting with pin spacing of 5.08 mm (0.2 ") or 7.62 mm (0.3"). The accessories for the ATE toggle switch include a glossy vinyl actuator cover (available in white, red, or black) and mounting bracket (suitable for straight PCB terminal models for ATE toggle switches). If the operating force of the switch actuator exceeds 12.7 N, it is recommended to use a bracket. For more detailed information, please refer to the table below. Direct, right angle or vertical through-hole PCB installation standard, flat or locking rod optional alternating or instant switching optional color actuator cover to suit your application terminal spacing meets standard PCB grid separation. The maximum switch rating is 50 mA at 48 V AC/DC and the minimum rating is 1 μ A at 20 mV AC/DC. The electrical life when immersed in washable gold-plated contacts is 10000 cycles. The maximum contact resistance is 50 m Ω, The maximum resistance of ATE4 and ATLE toggle switches is 100 m Ω, and the minimum insulation resistance is 500 M Ω. The dielectric strength is 250 V AC per minute, and the voltage of ATE4 and ATLE toggle switches is 500 V AC per minute. The operating temperature range is -20 to+85 ° C. Additional information for ATE single pole double throw toggle switches - * * Stock Number * * | Manufacturer Part Number * * | * Switch Operation * * | P92775+$31.881350+$30.5189200+$29.7559500+$29.56521000+$29.37442500+$29.15645000+$29.02027500+$28.8839 -
![]()
Category: Classification of electronic componentsDescription: Fujisoku Micro sliding switches - AS and ASE series Fuijsoku Micro AS and ASE series sliding switches have gold-plated contact points, making these sliding switches suitable for various applications that require switching currents as low as 1 μ A 20mV AC/DC. They have a miniature body profile, can be configured with single pole double throw or double pole double throw contacts, can be installed on straight or right angle printed circuit boards, have pin spacing of 2.54mm, 5.08mm, 7.62mm, and are suitable for various printed circuit board installation heights. The AS and ASE series have light operated touch and dual contact clamping mechanisms, providing higher contact reliability. The ASE series sliding switch has passed UL certification, with a immersion structure and a protective cover. The maximum switch rating for the 0.2 "and 0.3" pitch options in the straight or right angle direction is 0.5A at 48V AC/DC, with a minimum rating of 1 μ A. The electrical life for 20mV AC/DC at the maximum rating is 10000 cycles, and at the minimum rating is 50000 cycles. Operating force of 0.69 to 4.9N (AS series) Contact resistance maximum 50m Ω Minimum insulation resistance 500M Ω Dielectric strength 250 V AC (1 minute) Operating temperature range -20 to+85 ° C Additional information - * * Stock number * * | * Manufacturer part number * * | * Switch operation * * | * Number of poles * * | * Rated value * * | * Printed circuit board terminal type * * | * Installation/pitch * * 762-5072 | ASD-D-2M-10-Z | Connect Connect Connect | 1 | Maximum 48V AC/DC 50mA | Direct | Installation height: 12.3mm; Pitch: 2.54mm 762-5079 | ASSE-2M-10-Z | Connect Disconnect Connect | 1 | Maximum 48V AC/DC 50mA | Straight | Installation height: 12.3mm; Pitch: 2.54mm 762-5085 | AS2D-2M-10-Z | Connect Connect | 2 | Maximum 48V AC/DC 50mA | Straight | Installation height: 12.3mm; Pitch: 2.54mm 762-5088 | ASSE-5M-10-Z| Connect Disconnect Connect | 1 | Maximum 48V AC/DC 50mA | Right Angle | Installation Height: 3.10mm; Pitch: 5.08mm 762-5094 | AS2D-5M-143335+$23.335750+$22.3384200+$21.7799500+$21.64031000+$21.50072500+$21.34125000+$21.24147500+$21.1417 -
![]()
Category: Classification of electronic componentsDescription: Fujisoku Micro sliding switches - AS and ASE series Fuijsoku Micro AS and ASE series sliding switches have gold-plated contact points, making these sliding switches suitable for various applications that require switching currents as low as 1 μ A 20mV AC/DC. They have a miniature body profile, can be configured with single pole double throw or double pole double throw contacts, can be installed on straight or right angle printed circuit boards, have pin spacing of 2.54mm, 5.08mm, 7.62mm, and are suitable for various printed circuit board installation heights. The AS and ASE series have light operated touch and dual contact clamping mechanisms, providing higher contact reliability. The ASE series sliding switch has passed UL certification, with a immersion structure and a protective cover. The maximum switch rating for the 0.2 "and 0.3" pitch options in the straight or right angle direction is 0.5A at 48V AC/DC, with a minimum rating of 1 μ A. The electrical life for 20mV AC/DC at the maximum rating is 10000 cycles, and at the minimum rating is 50000 cycles. Operating force of 0.69 to 4.9N (AS series) Contact resistance maximum 50m Ω Minimum insulation resistance 500M Ω Dielectric strength 250 V AC (1 minute) Operating temperature range -20 to+85 ° C Additional information - * * Stock number * * | * Manufacturer part number * * | * Switch operation * * | * Number of poles * * | * Rated value * * | * Printed circuit board terminal type * * | * Installation/pitch * * 762-5072 | ASD-D-2M-10-Z | Connect Connect Connect | 1 | Maximum 48V AC/DC 50mA | Direct | Installation height: 12.3mm; Pitch: 2.54mm 762-5079 | ASSE-2M-10-Z | Connect Disconnect Connect | 1 | Maximum 48V AC/DC 50mA | Straight | Installation height: 12.3mm; Pitch: 2.54mm 762-5085 | AS2D-2M-10-Z | Connect Connect | 2 | Maximum 48V AC/DC 50mA | Straight | Installation height: 12.3mm; Pitch: 2.54mm 762-5088 | ASSE-5M-10-Z| Connect Disconnect Connect | 1 | Maximum 48V AC/DC 50mA | Right Angle | Installation Height: 3.10mm; Pitch: 5.08mm 762-5094 | AS2D-5M-160555+$27.660050+$26.4779200+$25.8160500+$25.65051000+$25.48502500+$25.29595000+$25.17777500+$25.0595 -
![]()
Category: Classification of electronic componentsDescription: Fujisoku Micro sliding switches - AS and ASE series Fuijsoku Micro AS and ASE series sliding switches have gold-plated contact points, making these sliding switches suitable for various applications that require switching currents as low as 1 μ A 20mV AC/DC. They have a miniature body profile, can be configured with single pole double throw or double pole double throw contacts, can be installed on straight or right angle printed circuit boards, have pin spacing of 2.54mm, 5.08mm, 7.62mm, and are suitable for various printed circuit board installation heights. The AS and ASE series have light operated touch and dual contact clamping mechanisms, providing higher contact reliability. The ASE series sliding switch has passed UL certification, with a immersion structure and a protective cover. The maximum switch rating for the 0.2 "and 0.3" pitch options in the straight or right angle direction is 0.5A at 48V AC/DC, with a minimum rating of 1 μ A. The electrical life for 20mV AC/DC at the maximum rating is 10000 cycles, and at the minimum rating is 50000 cycles. Operating force of 0.69 to 4.9N (AS series) Contact resistance maximum 50m Ω Minimum insulation resistance 500M Ω Dielectric strength 250 V AC (1 minute) Operating temperature range -20 to+85 ° C Additional information - * * Stock number * * | * Manufacturer part number * * | * Switch operation * * | * Number of poles * * | * Rated value * * | * Printed circuit board terminal type * * | * Installation/pitch * * 762-5072 | ASD-D-2M-10-Z | Connect Connect Connect | 1 | Maximum 48V AC/DC 50mA | Direct | Installation height: 12.3mm; Pitch: 2.54mm 762-5079 | ASSE-2M-10-Z | Connect Disconnect Connect | 1 | Maximum 48V AC/DC 50mA | Straight | Installation height: 12.3mm; Pitch: 2.54mm 762-5085 | AS2D-2M-10-Z | Connect Connect | 2 | Maximum 48V AC/DC 50mA | Straight | Installation height: 12.3mm; Pitch: 2.54mm 762-5088 | ASSE-5M-10-Z| Connect Disconnect Connect | 1 | Maximum 48V AC/DC 50mA | Right Angle | Installation Height: 3.10mm; Pitch: 5.08mm 762-5094 | AS2D-5M-116735+$14.254150+$13.6450200+$13.3038500+$13.21861000+$13.13332500+$13.03585000+$12.97497500+$12.9140 -
![]()
Category: Classification of electronic componentsDescription:80825+$18.628750+$17.8326200+$17.3868500+$17.27541000+$17.16392500+$17.03655000+$16.95697500+$16.8773 -
![]()
Category: Classification of electronic componentsDescription:99801+$47.142010+$44.4372100+$42.4278250+$42.1187500+$41.80961000+$41.46182500+$41.15275000+$40.9595 -
![]()
Category: Classification of electronic componentsDescription:33551+$53.156610+$50.1067100+$47.8410250+$47.4924500+$47.14381000+$46.75172500+$46.40315000+$46.1853 -
![]()
Category: Classification of electronic componentsDescription: Switch, SPST, Momentary, 0.01A, 12VDC, Through Hole-straight,99995+$32.479250+$31.0912200+$30.3139500+$30.11961000+$29.92532500+$29.70325000+$29.56447500+$29.4256 -
![]()
Category: Classification of electronic componentsDescription: Fujisoku Micro sliding switches - AS and ASE series Fuijsoku Micro AS and ASE series sliding switches have gold-plated contact points, making these sliding switches suitable for various applications that require switching currents as low as 1 μ A 20mV AC/DC. They have a miniature body profile, can be configured with single pole double throw or double pole double throw contacts, can be installed on straight or right angle printed circuit boards, have pin spacing of 2.54mm, 5.08mm, 7.62mm, and are suitable for various printed circuit board installation heights. The AS and ASE series have light operated touch and dual contact clamping mechanisms, providing higher contact reliability. The ASE series sliding switch has passed UL certification, with a immersion structure and a protective cover. The maximum switch rating for the 0.2 "and 0.3" pitch options in the straight or right angle direction is 0.5A at 48V AC/DC, with a minimum rating of 1 μ A. The electrical life for 20mV AC/DC at the maximum rating is 10000 cycles, and at the minimum rating is 50000 cycles. Operating force of 0.69 to 4.9N (AS series) Contact resistance maximum 50m Ω Minimum insulation resistance 500M Ω Dielectric strength 250 V AC (1 minute) Operating temperature range -20 to+85 ° C Additional information - * * Stock number * * | * Manufacturer part number * * | * Switch operation * * | * Number of poles * * | * Rated value * * | * Printed circuit board terminal type * * | * Installation/pitch * * 762-5072 | ASD-D-2M-10-Z | Connect Connect Connect | 1 | Maximum 48V AC/DC 50mA | Direct | Installation height: 12.3mm; Pitch: 2.54mm 762-5079 | ASSE-2M-10-Z | Connect Disconnect Connect | 1 | Maximum 48V AC/DC 50mA | Straight | Installation height: 12.3mm; Pitch: 2.54mm 762-5085 | AS2D-2M-10-Z | Connect Connect | 2 | Maximum 48V AC/DC 50mA | Straight | Installation height: 12.3mm; Pitch: 2.54mm 762-5088 | ASSE-5M-10-Z| Connect Disconnect Connect | 1 | Maximum 48V AC/DC 50mA | Right Angle | Installation Height: 3.10mm; Pitch: 5.08mm 762-5094 | AS2D-5M-199995+$14.267050+$13.6573200+$13.3158500+$13.23051000+$13.14512500+$13.04765000+$12.98667500+$12.9256
