logo
BOM RFQ Login Register
English
Home Page   Fujisoku
Fujisoku

Fujisoku
关联标题：
产品列表
Product Information
Description
Inventory
Gradient pricing
  • Model: MHS-221
    Brand: Fujisoku
    Encapsulation:
    Category: Slide switch
    Description: Fujisoku Ultra miniature sliding switches - MHS and MTS series Fuijsoku ultra miniature Picotop MHS and MTS sliding switch series are designed for many low-voltage signal applications. These switches are very compact in size, with a thin housing, suitable for a variety of circuits, including 3, 4, 6, 8, and 12 terminal blocks. This through-hole installation MHS type has a thin height of 3.5mm, while surface mounted MTS type has an installation height of 2mm from the board surface. The MHS and MTS series sliding switches have non short-circuit contacts. The maximum switch rating for straight or right angle options is 0.2A (12V DC),
    8296
    10+
    $6.4092
    100+
    $6.0887
    500+
    $5.8751
    1000+
    $5.8644
    2000+
    $5.8217
    5000+
    $5.7683
    7500+
    $5.7256
    10000+
    $5.7042
    PDF
    Contact
    Add to Cart Buy now pk
  • Model: LTR2-01-L5
    Brand: Fujisoku
    Encapsulation:
    Category: Button switch
    Description: Switch Push Button OFF (ON) SPST Square Button 0.01A 12VDC Momentary Contact PC Pins Thru-Hole Bag
    9001
    5+
    $28.2567
    50+
    $27.0491
    200+
    $26.3729
    500+
    $26.2038
    1000+
    $26.0348
    2500+
    $25.8416
    5000+
    $25.7208
    7500+
    $25.6001
    Contact
    Add to Cart Buy now pk
  • Model: SMR7110C-1E
    Brand: Fujisoku
    Encapsulation:
    Category: Classification of electronic components
    Description:
    9142
    10+
    $11.6652
    100+
    $11.0819
    500+
    $10.6931
    1000+
    $10.6737
    2000+
    $10.5959
    5000+
    $10.4987
    7500+
    $10.4209
    10000+
    $10.3820
    Contact
    Add to Cart Buy now pk
  • Model: MR1-10G-Z
    Brand: Fujisoku
    Encapsulation:
    Category: Classification of electronic components
    Description: Fujisoku Micro Rotary Switch - MR and MRE Series Micro Fujisoku MR and Waterproof MRE Rotary Switches are available in four poles: 1, 2, 3, or 4, with both 36 ° and 30 ° step angles available for position and number of steps. Self cleaning contacts provide high contact reliability, while soldering terminals are sealed with epoxy to prevent flux from entering. The waterproof MRE series rotary switches (stock numbers 225-593, 225-600, 225-616, 225-622, and 762-5669) are equipped with sealed O-rings to prevent water and dust from entering. These miniature rotary switches require a 6.5mm cut for panel installation, with a total length of 50/51mm (including wiring terminals) and a maximum body diameter of 16mm. Stock numbers 225-638, 225-644, 222-386, and 225-650 are suitable for panels with a maximum panel thickness of 2mm, while the rest of the MR series products are suitable for panels with a maximum thickness of 2.5mm. The waterproof MRE series is suitable for panels with a maximum panel thickness of 3.5mm. Four aluminum rotary knobs with a main body diameter of 12.7 mm, suitable for MR and MRE series rotary switches. There are two options, with a total height of 15.9 mm; inventory number 225-694 has a black body and white indicator line, while inventory number 225-688 has a silver body and black indicator line. The other two options have a body height of 20 mm, including stock number 225-672- black body with white indicator line, and stock number 225-666- silver body with black indicator line. Low contact resistance welding terminal insulation resistance: 100M Ω Minimum electrical life 10000 cycles Dielectric strength 500 V AC (30 ° MR series), 1000 V AC (36 ° MR and MRE series) (1 minute) Operating force 14.7 N.cm (30 ° MR series), 9.8 N.cm (36 ° MR and MRE series) Operating temperature range -10 to+65 ° C (30 ° MR series), -20 to+85 ° C Operating temperature range Electroplating * * 225-565 | MR1-10-Z | 1-pole | 10 position | 9 | 36 ° | 125 V AC, 500 mA maximum | Silver 762-5665 | MR1-10G-Z | 1-pole | 10 positi
    4121
    1+
    $127.3188
    10+
    $123.9974
    50+
    $121.4511
    100+
    $120.5654
    200+
    $119.9011
    500+
    $119.0154
    1000+
    $118.4618
    2000+
    $117.9083
    PDF
    Contact
    Add to Cart Buy now pk
  • Model: LTM3-02-G
    Brand: Fujisoku
    Encapsulation:
    Category: Button switch
    Description: Fujisoku Button switches - SP101, SPB101, SPC103, and LTM3-02 series Fujisoku * * SP101 * *, * * SPB101 * *, * * SPC103 * *, and * * LTM3-02 * * series are a series of non illuminated button switches with instant switching operation. These single pole switches offer different types, colors, seat ring shapes, and soldering or connector terminals to choose from. Designed for panel installation, these button switches are fastened into panel cutouts with a panel thickness between 1 and 2.5mm. The fixed rib body on the switch body ensures tight fixation (detailed information on the complete cutouts is shown in the table below). These switches are suitable for many applications that require compact body button switches. **The SP101 * * and SPC103 * * switches have a bite mechanism, allowing users to operate them with just a gentle touch. The attachment is applicable to * * SP101 * * button switches, including actuator buttons, available in white, red, or black with diameters of 8mm, 10mm, and 15mm respectively. Please refer to stock number 223-339 (typical). **SPB101 * * switch is a detector type switch with self-cleaning contacts. This type of switch has a long stroke length, which is normally connected and disconnected when the actuator button is pressed. **The LTM3-02 * * button switch includes a gray actuator button with dome shaped contacts, providing users with a sharp sense of click operation. Instant switching operation single pole single throw or single pole double throw silver plated and gold-plated contact long or short distance (travel) additional information - * * inventory number * * | * * manufacturer part number * * | * * wiring terminal * * | * * matching connector * * | * * operating force * * | * * travel * * | * panel cross-section * * | * panel thickness * * 762-5760 | SP101C | welding | N/A | 2.94 ± 0.98N | 1.0mm | 19.1x9.1mm | 1-2.5mm 762-5779 | SP101F-C | connector | EHR-5 (311-6237) | 2.94 ± 0.98N | 1.0mm | 19.1x9.1mm | 1-2.5mm 762-5791 | SPB101B-1 | Connector| EHR-2 (311-6209) | 1.47 - 2.94N |
    8995
    5+
    $21.5491
    50+
    $20.6282
    200+
    $20.1125
    500+
    $19.9835
    1000+
    $19.8546
    2500+
    $19.7073
    5000+
    $19.6152
    7500+
    $19.5231
    PDF
    Contact
    Add to Cart Buy now pk
  • Model: ATE2P-2M3-10-Z
    Brand: Fujisoku
    Encapsulation:
    Category: Classification of electronic components
    Description: Fujisoku Flip Switch - ATE Series Fuijsoku Miniature ATE Series Flip Switch features gold-plated contact points, allowing the switch to be used in many applications that require low switching currents as low as 1 μ A 20mV AC/DC. The PCB installation toggle switch certified by UL features an immersion washable structure and dual contact clamp, providing higher contact reliability. They also have a light touch function and a braking device. There are different types, including standard, flat, and locking rods, and single pole, double pole, and four pole contact configurations can be selected with alternating or momentary switching effects. Other options include straight, vertical, and right angle PCB mounting with pin spacing of 5.08 mm (0.2 ") or 7.62 mm (0.3"). The accessories for the ATE toggle switch include a glossy vinyl actuator cover (available in white, red, or black) and mounting bracket (suitable for straight PCB terminal models for ATE toggle switches). If the operating force of the switch actuator exceeds 12.7 N, it is recommended to use a bracket. For more detailed information, please refer to the table below. Direct, right angle or vertical through-hole PCB installation standard, flat or locking rod optional alternating or instant switching optional color actuator cover to suit your application terminal spacing meets standard PCB grid separation. The maximum switch rating is 50 mA at 48 V AC/DC and the minimum rating is 1 μ A at 20 mV AC/DC. The electrical life when immersed in washable gold-plated contacts is 10000 cycles. The maximum contact resistance is 50 m Ω, The maximum resistance of ATE4 and ATLE toggle switches is 100 m Ω, and the minimum insulation resistance is 500 M Ω. The dielectric strength is 250 V AC per minute, and the voltage of ATE4 and ATLE toggle switches is 500 V AC per minute. The operating temperature range is -20 to+85 ° C. Additional information for ATE single pole double throw toggle switches - * * Stock Number * * | Manufacturer Part Number * * | * Switch Operation * * | P
    2989
    5+
    $31.9024
    50+
    $30.5390
    200+
    $29.7756
    500+
    $29.5847
    1000+
    $29.3938
    2500+
    $29.1757
    5000+
    $29.0394
    7500+
    $28.9030
    PDF
    Contact
    Add to Cart Buy now pk
  • Model: LP1S-27G-229-Z
    Brand: Fujisoku
    Encapsulation:
    Category: Classification of electronic components
    Description: Fujisoku LED Lighting and Non Lighting Button Switch - LP Series Fujisoku LP Series is a set of LED lighting and non lighting button switches that use momentary on/off or alternating on/off switching operation. There are various types of terminal blocks to choose from, including printed circuit board installation or soldering terminal blocks, and other options include square or rectangular seat rings with various button colors. The switch with welded terminal blocks is designed for panel installation, with the switch body fastened into the panel cut. The panel thickness ranges from 1 to 2.5mm, and the fixing ribs on the switch housing ensure tight fixation. The switches installed on the printed circuit board comply with the standard grid separation of the printed circuit board. The LP series LED lighting switch features high brightness LEDs and a two-piece lens, which includes a transparent plate and a color button. Both the transparent plate and button can be printed or engraved with symbol sheets to suit your application. The non illuminated switch comes with a color button that can also be printed or engraved. The Fujisoku LP switch is suitable for many applications that require a compact body button switch, with a bite mechanism that allows users to operate with just a gentle touch. Optional lighting or non lighting LED, with panel or printed circuit board installation options, and using alternating (push lock) or instantaneous switching operation single pole double throw or double pole double throw red, green or yellow high brightness LED silver plated or gold-plated contact interlocking mechanism. Silver contact - maximum switch rating of 3A at 30V DC and 125/250V AC, minimum value of 10mA gold contact - maximum switch rating of 50mA at 48V AC/DC, minimum rating of 0.1mA at 20mV AC/DC, maximum contact resistance of 50m Ω (silver contact), maximum value of 100M Ω (gold contact), dielectric strength of 1500V AC (1 minute), insulation resistance of minimum 100M Ω silver contact - Electrical lifespan 30000 time
    3101
    1+
    $68.0122
    10+
    $65.0551
    100+
    $64.5228
    250+
    $64.1088
    500+
    $63.4583
    1000+
    $63.1626
    2500+
    $62.7486
    5000+
    $62.3938
    PDF
    Contact
    Add to Cart Buy now pk
  • Model: LP1S-26G-W-Z
    Brand: Fujisoku
    Encapsulation:
    Category: Classification of electronic components
    Description: Fujisoku LED Lighting and Non Lighting Button Switch - LP Series Fujisoku LP Series is a set of LED lighting and non lighting button switches that use momentary on/off or alternating on/off switching operation. There are various types of terminal blocks to choose from, including printed circuit board installation or soldering terminal blocks, and other options include square or rectangular seat rings with various button colors. The switch with welded terminal blocks is designed for panel installation, with the switch body fastened into the panel cut. The panel thickness ranges from 1 to 2.5mm, and the fixing ribs on the switch housing ensure tight fixation. The switches installed on the printed circuit board comply with the standard grid separation of the printed circuit board. The LP series LED lighting switch features high brightness LEDs and a two-piece lens, which includes a transparent plate and a color button. Both the transparent plate and button can be printed or engraved with symbol sheets to suit your application. The non illuminated switch comes with a color button that can also be printed or engraved. The Fujisoku LP switch is suitable for many applications that require a compact body button switch, with a bite mechanism that allows users to operate with just a gentle touch. Optional lighting or non lighting LED, with panel or printed circuit board installation options, and using alternating (push lock) or instantaneous switching operation single pole double throw or double pole double throw red, green or yellow high brightness LED silver plated or gold-plated contact interlocking mechanism. Silver contact - maximum switch rating of 3A at 30V DC and 125/250V AC, minimum value of 10mA gold contact - maximum switch rating of 50mA at 48V AC/DC, minimum rating of 0.1mA at 20mV AC/DC, maximum contact resistance of 50m Ω (silver contact), maximum value of 100M Ω (gold contact), dielectric strength of 1500V AC (1 minute), insulation resistance of minimum 100M Ω silver contact - Electrical lifespan 30000 time
    9157
    1+
    $52.4295
    10+
    $49.4213
    100+
    $47.1866
    250+
    $46.8428
    500+
    $46.4990
    1000+
    $46.1122
    2500+
    $45.7684
    5000+
    $45.5535
    PDF
    Contact
    Add to Cart Buy now pk
  • Model: ET103A32-Z
    Brand: Fujisoku
    Encapsulation:
    Category: toggle switch
    Description: Fujisoku Flip Switch - ET Series Fujisoku ET Series Flip Switch offers optional single pole, double pole, three stage, and four pole contact configurations, with alternating or instantaneous switching function, and comes with. 250 "inserts, screws, or welded terminals. The features of ET Flip Switch include the use of self extinguishing UL94V-0 phenolic resin body material, which provides excellent arc resistance and anti tracking performance, with contact mechanism to ensure high reliability and reduce jitter/bounce time. The ET series toggle switch is designed for panel installation, with the switch body fitted into a 12.3mm diameter opening (without using a locking ring, 12.5mm using a locking ring), and a maximum panel thickness of 5.5mm. The ET toggle switch series includes various types of toggle switches, which can be used for various applications that require switching high power from 3A to 30A. The compatible accessories of this series include waterproof boots (available in gray, red, and black colors) and on/off nameplates, please refer to stock numbers 222-948, 222-932, 222-954, 222-910, and 222-926, respectively. High current rating -3A to 30A welding, screw or. 250 "plug terminal alternating or instantaneous switching (instantaneous switching, using only bipolar and three pole toggle switches). The maximum contact resistance of 3A rated switches (stock numbers 398-225, 762-5384 and 762-5388) is 30m Ω, and the maximum contact resistance of all other ET toggle switches is 20m Ω. Dielectric strength 1500 V AC (1 minute) Insulation resistance minimum 100M Ω. Additional information - Single pole ET series toggle switches - * * Stock number * * | * Manufacturer part number * * | * * Contact * * | * * Switch operation * * | * * Rated value * * | * * Terminal type * * | * * Electrical life * * | * * Certification * 398-225 | ET103A 12-Z | Single pole single throw | Open close | 3A @ 125V AC | Solder joint | 10000 operations | UL, CSA 762-5384 | ET103A32-Z | Single pole single throw | Open close | 3A @ 125V C
    7216
    1+
    $50.6934
    10+
    $47.7848
    100+
    $45.6241
    250+
    $45.2917
    500+
    $44.9593
    1000+
    $44.5853
    2500+
    $44.2529
    5000+
    $44.0451
    PDF
    Contact
    Add to Cart Buy now pk
  • Model: FT1E-2M-Z
    Brand: Fujisoku
    Encapsulation:
    Category: Classification of electronic components
    Description:
    5130
    10+
    $10.7196
    100+
    $10.1836
    500+
    $9.8263
    1000+
    $9.8084
    2000+
    $9.7370
    5000+
    $9.6476
    7500+
    $9.5762
    10000+
    $9.5404
    Contact
    Add to Cart Buy now pk
  • Model: FT1G-2M-Z
    Brand: Fujisoku
    Encapsulation:
    Category: toggle switch
    Description: Fujisoku Flip button switch - FT series Fujisoku FT series is an ultra miniature printed circuit board mounted flip button switch with alternating or momentary switching operation. The ultra miniature toggle switch has two options of single pole and double pole contact configuration, with various combination switches for on/off. Designed specifically for printed circuit board installation, with straight, right angle, or vertical printed circuit board wiring terminals. In addition to the washable structure and contact clamp device that ensures long-term stability and reliability, other features of this toggle switch FT series include a 2.54mm terminal spacing, compliance with standard printed circuit board grid separation, and an independent braking device with good operational touch. These ultra miniature toggle switches come with gold-plated contacts and can be used in many applications that require low switching currents (as low as 1 μ A, 20mV DC). Ultra miniature body size 4.5 x 7 x 7mm, straight, right angle, and vertical printed circuit board through-hole installation options 0.1 "spacing immersion washable gold-plated contacts with a maximum switch rating of 0.4VA (maximum 28V DC) and a minimum rating of 1 μ A at 20mV DC. Low contact resistance of 100 m Ω, maximum dielectric strength of 250 V AC (1 minute), minimum insulation resistance of 500M Ω, and maximum rated electrical life of 10000 cycles. Operating temperature range -40 ° C to+85 ° C. Additional information - * * Stock Number * * | * * Manufacturer Part Number * * | * Printed Circuit Board Terminal Type * * | * * Contacts * * | * Switch Operation * * 222-392 | FT1D-2M-Z | Straight printed circuit board | Single Double throw knife | Connect Connect Connect 762-5489 | FT1D-4M-Z | Vertical printed circuit board | Single throw knife | Connect Connect 222-459 | FT1D-5M-Z| Right Angle Printed Circuit Board | Single Pole Double Throw | Connect Connect 222-409 | FT1E-2M-Z | Straight Direction Printed Circuit Board | Single Pole Double Throw | Connect Disco
    4401
    5+
    $25.1784
    50+
    $24.1024
    200+
    $23.4998
    500+
    $23.3492
    1000+
    $23.1986
    2500+
    $23.0264
    5000+
    $22.9188
    7500+
    $22.8112
    PDF
    Contact
    Add to Cart Buy now pk
  • Model: ET103V12-Z
    Brand: Fujisoku
    Encapsulation:
    Category: toggle switch
    Description: Fujisoku Flip Switch - ET Series Fujisoku ET Series Flip Switch offers optional single pole, double pole, three stage, and four pole contact configurations, with alternating or instantaneous switching function, and comes with. 250 "inserts, screws, or welded terminals. The features of ET Flip Switch include the use of self extinguishing UL94V-0 phenolic resin body material, which provides excellent arc resistance and anti tracking performance, with contact mechanism to ensure high reliability and reduce jitter/bounce time. The ET series toggle switch is designed for panel installation, with the switch body fitted into a 12.3mm diameter opening (without using a locking ring, 12.5mm using a locking ring), and a maximum panel thickness of 5.5mm. The ET toggle switch series includes various types of toggle switches, which can be used for various applications that require switching high power from 3A to 30A. The compatible accessories of this series include waterproof boots (available in gray, red, and black colors) and on/off nameplates, please refer to stock numbers 222-948, 222-932, 222-954, 222-910, and 222-926, respectively. High current rating -3A to 30A welding, screw or. 250 "plug terminal alternating or instantaneous switching (instantaneous switching, using only bipolar and three pole toggle switches). The maximum contact resistance of 3A rated switches (stock numbers 398-225, 762-5384 and 762-5388) is 30m Ω, and the maximum contact resistance of all other ET toggle switches is 20m Ω. Dielectric strength 1500 V AC (1 minute) Insulation resistance minimum 100M Ω. Additional information - Single pole ET series toggle switches - * * Stock number * * | * Manufacturer part number * * | * * Contact * * | * * Switch operation * * | * * Rated value * * | * * Terminal type * * | * * Electrical life * * | * * Certification * 398-225 | ET103A 12-Z | Single pole single throw | Open close | 3A @ 125V AC | Solder joint | 10000 operations | UL, CSA 762-5384 | ET103A32-Z | Single pole single throw | Open close | 3A @ 125V C
    3252
    5+
    $28.9493
    50+
    $27.7122
    200+
    $27.0194
    500+
    $26.8462
    1000+
    $26.6730
    2500+
    $26.4750
    5000+
    $26.3513
    7500+
    $26.2276
    PDF
    Contact
    Add to Cart Buy now pk
  • Model: ET310E12-Z
    Brand: Fujisoku
    Encapsulation:
    Category: Classification of electronic components
    Description: Fujisoku Flip Switch - ET Series Fujisoku ET Series Flip Switch offers optional single pole, double pole, three stage, and four pole contact configurations, with alternating or instantaneous switching function, and comes with. 250 "inserts, screws, or welded terminals. The features of ET Flip Switch include the use of self extinguishing UL94V-0 phenolic resin body material, which provides excellent arc resistance and anti tracking performance, with contact mechanism to ensure high reliability and reduce jitter/bounce time. The ET series toggle switch is designed for panel installation, with the switch body fitted into a 12.3mm diameter opening (without using a locking ring, 12.5mm using a locking ring), and a maximum panel thickness of 5.5mm. The ET toggle switch series includes various types of toggle switches, which can be used for various applications that require switching high power from 3A to 30A. The compatible accessories of this series include waterproof boots (available in gray, red, and black colors) and on/off nameplates, please refer to stock numbers 222-948, 222-932, 222-954, 222-910, and 222-926, respectively. High current rating -3A to 30A welding, screw or. 250 "plug terminal alternating or instantaneous switching (instantaneous switching, using only bipolar and three pole toggle switches). The maximum contact resistance of 3A rated switches (stock numbers 398-225, 762-5384 and 762-5388) is 30m Ω, and the maximum contact resistance of all other ET toggle switches is 20m Ω. Dielectric strength 1500 V AC (1 minute) Insulation resistance minimum 100M Ω. Additional information - Single pole ET series toggle switches - * * Stock number * * | * Manufacturer part number * * | * * Contact * * | * * Switch operation * * | * * Rated value * * | * * Terminal type * * | * * Electrical life * * | * * Certification * 398-225 | ET103A 12-Z | Single pole single throw | Open close | 3A @ 125V AC | Solder joint | 10000 operations | UL, CSA 762-5384 | ET103A32-Z | Single pole single throw | Open close | 3A @ 125V C
    5190
    1+
    $80.3229
    10+
    $76.8306
    100+
    $76.2020
    250+
    $75.7131
    500+
    $74.9448
    1000+
    $74.5955
    2500+
    $74.1066
    5000+
    $73.6875
    PDF
    Contact
    Add to Cart Buy now pk
  • Model: ATE1E-2F3-10-Z
    Brand: Fujisoku
    Encapsulation:
    Category: Classification of electronic components
    Description: Fujisoku Flip Switch - ATE Series Fuijsoku Miniature ATE Series Flip Switch features gold-plated contact points, allowing the switch to be used in many applications that require low switching currents as low as 1 μ A 20mV AC/DC. The PCB installation toggle switch certified by UL features an immersion washable structure and dual contact clamp, providing higher contact reliability. They also have a light touch function and a braking device. There are different types, including standard, flat, and locking rods, and single pole, double pole, and four pole contact configurations can be selected with alternating or momentary switching effects. Other options include straight, vertical, and right angle PCB mounting with pin spacing of 5.08 mm (0.2 ") or 7.62 mm (0.3"). The accessories for the ATE toggle switch include a glossy vinyl actuator cover (available in white, red, or black) and mounting bracket (suitable for straight PCB terminal models for ATE toggle switches). If the operating force of the switch actuator exceeds 12.7 N, it is recommended to use a bracket. For more detailed information, please refer to the table below. Direct, right angle or vertical through-hole PCB installation standard, flat or locking rod optional alternating or instant switching optional color actuator cover to suit your application terminal spacing meets standard PCB grid separation. The maximum switch rating is 50 mA at 48 V AC/DC and the minimum rating is 1 μ A at 20 mV AC/DC. The electrical life when immersed in washable gold-plated contacts is 10000 cycles. The maximum contact resistance is 50 m Ω, The maximum resistance of ATE4 and ATLE toggle switches is 100 m Ω, and the minimum insulation resistance is 500 M Ω. The dielectric strength is 250 V AC per minute, and the voltage of ATE4 and ATLE toggle switches is 500 V AC per minute. The operating temperature range is -20 to+85 ° C. Additional information for ATE single pole double throw toggle switches - * * Stock Number * * | Manufacturer Part Number * * | * Switch Operation * * | P
    1172
    5+
    $27.8916
    50+
    $26.6997
    200+
    $26.0322
    500+
    $25.8653
    1000+
    $25.6984
    2500+
    $25.5077
    5000+
    $25.3885
    7500+
    $25.2693
    PDF
    Contact
    Add to Cart Buy now pk
  • Model: ASE2P-6M-10-Z
    Brand: Fujisoku
    Encapsulation:
    Category: Classification of electronic components
    Description: Fujisoku Micro sliding switches - AS and ASE series Fuijsoku Micro AS and ASE series sliding switches have gold-plated contact points, making these sliding switches suitable for various applications that require switching currents as low as 1 μ A 20mV AC/DC. They have a miniature body profile, can be configured with single pole double throw or double pole double throw contacts, can be installed on straight or right angle printed circuit boards, have pin spacing of 2.54mm, 5.08mm, 7.62mm, and are suitable for various printed circuit board installation heights. The AS and ASE series have light operated touch and dual contact clamping mechanisms, providing higher contact reliability. The ASE series sliding switch has passed UL certification, with a immersion structure and a protective cover. The maximum switch rating for the 0.2 "and 0.3" pitch options in the straight or right angle direction is 0.5A at 48V AC/DC, with a minimum rating of 1 μ A. The electrical life for 20mV AC/DC at the maximum rating is 10000 cycles, and at the minimum rating is 50000 cycles. Operating force of 0.69 to 4.9N (AS series) Contact resistance maximum 50m Ω Minimum insulation resistance 500M Ω Dielectric strength 250 V AC (1 minute) Operating temperature range -20 to+85 ° C Additional information - * * Stock number * * | * Manufacturer part number * * | * Switch operation * * | * Number of poles * * | * Rated value * * | * Printed circuit board terminal type * * | * Installation/pitch * * 762-5072 | ASD-D-2M-10-Z | Connect Connect Connect | 1 | Maximum 48V AC/DC 50mA | Direct | Installation height: 12.3mm; Pitch: 2.54mm 762-5079 | ASSE-2M-10-Z | Connect Disconnect Connect | 1 | Maximum 48V AC/DC 50mA | Straight | Installation height: 12.3mm; Pitch: 2.54mm 762-5085 | AS2D-2M-10-Z | Connect Connect | 2 | Maximum 48V AC/DC 50mA | Straight | Installation height: 12.3mm; Pitch: 2.54mm 762-5088 | ASSE-5M-10-Z| Connect Disconnect Connect | 1 | Maximum 48V AC/DC 50mA | Right Angle | Installation Height: 3.10mm; Pitch: 5.08mm 762-5094 | AS2D-5M-1
    4126
    5+
    $28.1982
    50+
    $26.9931
    200+
    $26.3183
    500+
    $26.1496
    1000+
    $25.9809
    2500+
    $25.7881
    5000+
    $25.6676
    7500+
    $25.5471
    PDF
    Contact
    Add to Cart Buy now pk
  • Model: DRS-3116-Z
    Brand: Fujisoku
    Encapsulation:
    Category: Classification of electronic components
    Description:
    3853
    1+
    $48.0948
    10+
    $45.3353
    100+
    $43.2854
    250+
    $42.9700
    500+
    $42.6546
    1000+
    $42.2998
    2500+
    $41.9844
    5000+
    $41.7873
    Contact
    Add to Cart Buy now pk
  • Model: BT1E-2M4-Z
    Brand: Fujisoku
    Encapsulation:
    Category: toggle switch
    Description: Fujisoku Flip button switch - BT series Fujisoku BT series flip button switch is a micro printed circuit board mounted flip button switch with alternating or instantaneous switching function. They have friction contact devices that ensure long-term stability and reliability, as well as a main structure sealed with epoxy resin to prevent flux from entering. Other features of the BT series toggle switches include a 2.54mm terminal spacing, standard printed circuit board grid spacing, independent braking devices with good tactile sensation during operation, and gold-plated contacts, allowing them to be used in many low current applications, including low-power circuit switches. Both unipolar and bipolar BT series toggle switches are equipped with integrated printed circuit board mounting brackets to provide additional mechanical support on the circuit board. Alternating or instantaneous switching terminal spacing meets the standard PCB grid separation. The maximum switch rating is 50mA (20V AC/DC). The gold-plated contacts have an electrical lifespan of 50000 cycles. The maximum contact resistance is 50m Ω and the minimum insulation resistance is 10000M Ω. The dielectric strength is 500V AC (1 minute). The operating temperature range is -20 to+85 ° C. Note that the instantaneous status is displayed in parentheses, such as (on) - on. ###Flip button switch * * instantaneous function * * (spring loaded reset): | When the load is released, the switch or contact circuit breaker returns to its original position. For example, the electric bell button has a locking function. After the load is released, the switch or contact circuit breaker remains (stops) in the new position.
    9485
    1+
    $44.1445
    10+
    $41.6116
    100+
    $39.7300
    250+
    $39.4406
    500+
    $39.1511
    1000+
    $38.8254
    2500+
    $38.5360
    5000+
    $38.3550
    PDF
    Contact
    Add to Cart Buy now pk
  • Model: ATE1D-5F3-10-Z
    Brand: Fujisoku
    Encapsulation:
    Category: toggle switch
    Description: Fujisoku Flip Switch - ATE Series Fuijsoku Miniature ATE Series Flip Switch features gold-plated contact points, allowing the switch to be used in many applications that require low switching currents as low as 1 μ A 20mV AC/DC. The PCB installation toggle switch certified by UL features an immersion washable structure and dual contact clamp, providing higher contact reliability. They also have a light touch function and a braking device. There are different types, including standard, flat, and locking rods, and single pole, double pole, and four pole contact configurations can be selected with alternating or momentary switching effects. Other options include straight, vertical, and right angle PCB mounting with pin spacing of 5.08 mm (0.2 ") or 7.62 mm (0.3"). The accessories for the ATE toggle switch include a glossy vinyl actuator cover (available in white, red, or black) and mounting bracket (suitable for straight PCB terminal models for ATE toggle switches). If the operating force of the switch actuator exceeds 12.7 N, it is recommended to use a bracket. For more detailed information, please refer to the table below. Direct, right angle or vertical through-hole PCB installation standard, flat or locking rod optional alternating or instant switching optional color actuator cover to suit your application terminal spacing meets standard PCB grid separation. The maximum switch rating is 50 mA at 48 V AC/DC and the minimum rating is 1 μ A at 20 mV AC/DC. The electrical life when immersed in washable gold-plated contacts is 10000 cycles. The maximum contact resistance is 50 m Ω, The maximum resistance of ATE4 and ATLE toggle switches is 100 m Ω, and the minimum insulation resistance is 500 M Ω. The dielectric strength is 250 V AC per minute, and the voltage of ATE4 and ATLE toggle switches is 500 V AC per minute. The operating temperature range is -20 to+85 ° C. Additional information for ATE single pole double throw toggle switches - * * Stock Number * * | Manufacturer Part Number * * | * Switch Operation * * | P
    4737
    5+
    $28.2754
    50+
    $27.0670
    200+
    $26.3904
    500+
    $26.2212
    1000+
    $26.0520
    2500+
    $25.8587
    5000+
    $25.7379
    7500+
    $25.6170
    PDF
    Contact
    Add to Cart Buy now pk
  • Model: ATE2D-7F3-10-Z
    Brand: Fujisoku
    Encapsulation:
    Category: Classification of electronic components
    Description: Fujisoku Flip Switch - ATE Series Fuijsoku Miniature ATE Series Flip Switch features gold-plated contact points, allowing the switch to be used in many applications that require low switching currents as low as 1 μ A 20mV AC/DC. The PCB installation toggle switch certified by UL features an immersion washable structure and dual contact clamp, providing higher contact reliability. They also have a light touch function and a braking device. There are different types, including standard, flat, and locking rods, and single pole, double pole, and four pole contact configurations can be selected with alternating or momentary switching effects. Other options include straight, vertical, and right angle PCB mounting with pin spacing of 5.08 mm (0.2 ") or 7.62 mm (0.3"). The accessories for the ATE toggle switch include a glossy vinyl actuator cover (available in white, red, or black) and mounting bracket (suitable for straight PCB terminal models for ATE toggle switches). If the operating force of the switch actuator exceeds 12.7 N, it is recommended to use a bracket. For more detailed information, please refer to the table below. Direct, right angle or vertical through-hole PCB installation standard, flat or locking rod optional alternating or instant switching optional color actuator cover to suit your application terminal spacing meets standard PCB grid separation. The maximum switch rating is 50 mA at 48 V AC/DC and the minimum rating is 1 μ A at 20 mV AC/DC. The electrical life when immersed in washable gold-plated contacts is 10000 cycles. The maximum contact resistance is 50 m Ω, The maximum resistance of ATE4 and ATLE toggle switches is 100 m Ω, and the minimum insulation resistance is 500 M Ω. The dielectric strength is 250 V AC per minute, and the voltage of ATE4 and ATLE toggle switches is 500 V AC per minute. The operating temperature range is -20 to+85 ° C. Additional information for ATE single pole double throw toggle switches - * * Stock Number * * | Manufacturer Part Number * * | * Switch Operation * * | P
    8192
    1+
    $45.5511
    10+
    $42.9376
    100+
    $40.9960
    250+
    $40.6973
    500+
    $40.3986
    1000+
    $40.0626
    2500+
    $39.7639
    5000+
    $39.5772
    PDF
    Contact
    Add to Cart Buy now pk
  • Model: ATE1D-2M3-10-Z
    Brand: Fujisoku
    Encapsulation:
    Category: toggle switch
    Description: Switch Toggle ON ON SPDT Round Toggle PC Pins 0.05A 48VAC 48VDC 0.4VA PC Mount Plastic Pack
    3816
    PDF
    Contact
    Add to Cart Buy now pk
  • Model: ATE1H-6M3-10-Z
    Brand: Fujisoku
    Encapsulation:
    Category: Classification of electronic components
    Description: Fujisoku Flip Switch - ATE Series Fuijsoku Miniature ATE Series Flip Switch features gold-plated contact points, allowing the switch to be used in many applications that require low switching currents as low as 1 μ A 20mV AC/DC. The PCB installation toggle switch certified by UL features an immersion washable structure and dual contact clamp, providing higher contact reliability. They also have a light touch function and a braking device. There are different types, including standard, flat, and locking rods, and single pole, double pole, and four pole contact configurations can be selected with alternating or momentary switching effects. Other options include straight, vertical, and right angle PCB mounting with pin spacing of 5.08 mm (0.2 ") or 7.62 mm (0.3"). The accessories for the ATE toggle switch include a glossy vinyl actuator cover (available in white, red, or black) and mounting bracket (suitable for straight PCB terminal models for ATE toggle switches). If the operating force of the switch actuator exceeds 12.7 N, it is recommended to use a bracket. For more detailed information, please refer to the table below. Direct, right angle or vertical through-hole PCB installation standard, flat or locking rod optional alternating or instant switching optional color actuator cover to suit your application terminal spacing meets standard PCB grid separation. The maximum switch rating is 50 mA at 48 V AC/DC and the minimum rating is 1 μ A at 20 mV AC/DC. The electrical life when immersed in washable gold-plated contacts is 10000 cycles. The maximum contact resistance is 50 m Ω, The maximum resistance of ATE4 and ATLE toggle switches is 100 m Ω, and the minimum insulation resistance is 500 M Ω. The dielectric strength is 250 V AC per minute, and the voltage of ATE4 and ATLE toggle switches is 500 V AC per minute. The operating temperature range is -20 to+85 ° C. Additional information for ATE single pole double throw toggle switches - * * Stock Number * * | Manufacturer Part Number * * | * Switch Operation * * | P
    3792
    5+
    $19.7601
    50+
    $18.9157
    200+
    $18.4428
    500+
    $18.3246
    1000+
    $18.2063
    2500+
    $18.0712
    5000+
    $17.9868
    7500+
    $17.9023
    PDF
    Contact
    Add to Cart Buy now pk
  • Model: ATE44D-2M3-Z
    Brand: Fujisoku
    Encapsulation:
    Category: Classification of electronic components
    Description: Fujisoku Flip Switch - ATE Series Fuijsoku Miniature ATE Series Flip Switch features gold-plated contact points, allowing the switch to be used in many applications that require low switching currents as low as 1 μ A 20mV AC/DC. The PCB installation toggle switch certified by UL features an immersion washable structure and dual contact clamp, providing higher contact reliability. They also have a light touch function and a braking device. There are different types, including standard, flat, and locking rods, and single pole, double pole, and four pole contact configurations can be selected with alternating or momentary switching effects. Other options include straight, vertical, and right angle PCB mounting with pin spacing of 5.08 mm (0.2 ") or 7.62 mm (0.3"). The accessories for the ATE toggle switch include a glossy vinyl actuator cover (available in white, red, or black) and mounting bracket (suitable for straight PCB terminal models for ATE toggle switches). If the operating force of the switch actuator exceeds 12.7 N, it is recommended to use a bracket. For more detailed information, please refer to the table below. Direct, right angle or vertical through-hole PCB installation standard, flat or locking rod optional alternating or instant switching optional color actuator cover to suit your application terminal spacing meets standard PCB grid separation. The maximum switch rating is 50 mA at 48 V AC/DC and the minimum rating is 1 μ A at 20 mV AC/DC. The electrical life when immersed in washable gold-plated contacts is 10000 cycles. The maximum contact resistance is 50 m Ω, The maximum resistance of ATE4 and ATLE toggle switches is 100 m Ω, and the minimum insulation resistance is 500 M Ω. The dielectric strength is 250 V AC per minute, and the voltage of ATE4 and ATLE toggle switches is 500 V AC per minute. The operating temperature range is -20 to+85 ° C. Additional information for ATE single pole double throw toggle switches - * * Stock Number * * | Manufacturer Part Number * * | * Switch Operation * * | P
    1122
    1+
    $61.7930
    10+
    $59.1063
    100+
    $58.6227
    250+
    $58.2466
    500+
    $57.6555
    1000+
    $57.3868
    2500+
    $57.0107
    5000+
    $56.6883
    PDF
    Contact
    Add to Cart Buy now pk
  • Model: MRK1031G-Z
    Brand: Fujisoku
    Encapsulation:
    Category: Classification of electronic components
    Description: Fujisoku MRK The Fujisoku MRK series key switches are designed for many low-voltage switch applications. The single pole Fuijsoku MRK key switch can be installed on a straight or right angle printed circuit board, with versions including recessed (the key cannot be removed from one or two positions) or non recessed (the key can be removed from all positions). The three position key switch has a 45 ° indication angle, while the two position key switch has a 90 ° indication angle. All versions have: steel ball mechanism - providing a clear sense of click operation, self-cleaning contacts - providing high contact reliability, 2.54 x 2.54 mm (. 100 "x. 100") terminal spacing - compliant with standard printed circuit board grid separation. Maximum switch rated value 0.4 VA (at 20 V DC) gold-plated contact resistance 200m Ω maximum insulation resistance 100 M Ω minimum electrical life 10000 cycles operating force 2.94 N.cm dielectric strength 250 V AC (1 minute) -20 to+70 ° C operating temperature range Additional information - * * Stock number * * | * Manufacturer part number * * | * * Switch operation * * | * * Key withdrawable position * * | * * Key angle * * | * Printed circuit board terminal type * * 225-521 | MRK1031D-Z | Connect Connect Connect Connect Connect | O-O | 45 ° | Direct 225-559 | MRK1031D-R-Z | Connect Connect Connect Connect Connect Connect | O-O | 45 ° | Right angle 762-5678 | MRK1031G-Z | Connect Connect Connect Connect | O-X | 45 ° | Straight 762-5675 | MRK1031L-Z | Connect Connect Connect Connect | X-O-X | 45 ° | Straight 762-5671 | MRK1031L-R-Z| Connect Connect Connect | X-O-X | 45 ° | Right angle 225-509 | MRK1012A-Z | Connect Connect Connect | O-O | 90 ° | Straight 225-537 | MRK1012A-R-Z | Connect Connect Connect | O-O | 90 ° | Right angle 225-515 | MRK1012B-Z | Connect Connect Connect | O-X | 90 ° | Straight 225-543 | MRK1012B-R-Z | Connect Connect Connect | O-X | 90 ° | Right angle O=Key can be removed; X=Key cannot be removed # # # Note that each Fuijsoku MRK key switch comes with two keys
    8117
    1+
    $59.4896
    10+
    $56.0763
    100+
    $53.5407
    250+
    $53.1506
    500+
    $52.7605
    1000+
    $52.3216
    2500+
    $51.9315
    5000+
    $51.6877
    PDF
    Contact
    Add to Cart Buy now pk
  • Model: ATE1G-2F3-10-Z
    Brand: Fujisoku
    Encapsulation:
    Category: Classification of electronic components
    Description: Fujisoku Flip Switch - ATE Series Fuijsoku Miniature ATE Series Flip Switch features gold-plated contact points, allowing the switch to be used in many applications that require low switching currents as low as 1 μ A 20mV AC/DC. The PCB installation toggle switch certified by UL features an immersion washable structure and dual contact clamp, providing higher contact reliability. They also have a light touch function and a braking device. There are different types, including standard, flat, and locking rods, and single pole, double pole, and four pole contact configurations can be selected with alternating or momentary switching effects. Other options include straight, vertical, and right angle PCB mounting with pin spacing of 5.08 mm (0.2 ") or 7.62 mm (0.3"). The accessories for the ATE toggle switch include a glossy vinyl actuator cover (available in white, red, or black) and mounting bracket (suitable for straight PCB terminal models for ATE toggle switches). If the operating force of the switch actuator exceeds 12.7 N, it is recommended to use a bracket. For more detailed information, please refer to the table below. Direct, right angle or vertical through-hole PCB installation standard, flat or locking rod optional alternating or instant switching optional color actuator cover to suit your application terminal spacing meets standard PCB grid separation. The maximum switch rating is 50 mA at 48 V AC/DC and the minimum rating is 1 μ A at 20 mV AC/DC. The electrical life when immersed in washable gold-plated contacts is 10000 cycles. The maximum contact resistance is 50 m Ω, The maximum resistance of ATE4 and ATLE toggle switches is 100 m Ω, and the minimum insulation resistance is 500 M Ω. The dielectric strength is 250 V AC per minute, and the voltage of ATE4 and ATLE toggle switches is 500 V AC per minute. The operating temperature range is -20 to+85 ° C. Additional information for ATE single pole double throw toggle switches - * * Stock Number * * | Manufacturer Part Number * * | * Switch Operation * * | P
    8943
    5+
    $28.8487
    50+
    $27.6158
    200+
    $26.9254
    500+
    $26.7528
    1000+
    $26.5802
    2500+
    $26.3830
    5000+
    $26.2597
    7500+
    $26.1364
    PDF
    Contact
    Add to Cart Buy now pk
  • Model: ATE2D-7M3-10-Z
    Brand: Fujisoku
    Encapsulation:
    Category: toggle switch
    Description: Fujisoku Flip Switch - ATE Series Fuijsoku Miniature ATE Series Flip Switch features gold-plated contact points, allowing the switch to be used in many applications that require low switching currents as low as 1 μ A 20mV AC/DC. The PCB installation toggle switch certified by UL features an immersion washable structure and dual contact clamp, providing higher contact reliability. They also have a light touch function and a braking device. There are different types, including standard, flat, and locking rods, and single pole, double pole, and four pole contact configurations can be selected with alternating or momentary switching effects. Other options include straight, vertical, and right angle PCB mounting with pin spacing of 5.08 mm (0.2 ") or 7.62 mm (0.3"). The accessories for the ATE toggle switch include a glossy vinyl actuator cover (available in white, red, or black) and mounting bracket (suitable for straight PCB terminal models for ATE toggle switches). If the operating force of the switch actuator exceeds 12.7 N, it is recommended to use a bracket. For more detailed information, please refer to the table below. Direct, right angle or vertical through-hole PCB installation standard, flat or locking rod optional alternating or instant switching optional color actuator cover to suit your application terminal spacing meets standard PCB grid separation. The maximum switch rating is 50 mA at 48 V AC/DC and the minimum rating is 1 μ A at 20 mV AC/DC. The electrical life when immersed in washable gold-plated contacts is 10000 cycles. The maximum contact resistance is 50 m Ω, The maximum resistance of ATE4 and ATLE toggle switches is 100 m Ω, and the minimum insulation resistance is 500 M Ω. The dielectric strength is 250 V AC per minute, and the voltage of ATE4 and ATLE toggle switches is 500 V AC per minute. The operating temperature range is -20 to+85 ° C. Additional information for ATE single pole double throw toggle switches - * * Stock Number * * | Manufacturer Part Number * * | * Switch Operation * * | P
    8640
    5+
    $33.0747
    50+
    $31.6613
    200+
    $30.8697
    500+
    $30.6719
    1000+
    $30.4740
    2500+
    $30.2478
    5000+
    $30.1065
    7500+
    $29.9651
    PDF
    Contact
    Add to Cart Buy now pk
  • Model: ATE2P-2F3-10-Z
    Brand: Fujisoku
    Encapsulation:
    Category: toggle switch
    Description: Fujisoku Flip Switch - ATE Series Fuijsoku Miniature ATE Series Flip Switch features gold-plated contact points, allowing the switch to be used in many applications that require low switching currents as low as 1 μ A 20mV AC/DC. The PCB installation toggle switch certified by UL features an immersion washable structure and dual contact clamp, providing higher contact reliability. They also have a light touch function and a braking device. There are different types, including standard, flat, and locking rods, and single pole, double pole, and four pole contact configurations can be selected with alternating or momentary switching effects. Other options include straight, vertical, and right angle PCB mounting with pin spacing of 5.08 mm (0.2 ") or 7.62 mm (0.3"). The accessories for the ATE toggle switch include a glossy vinyl actuator cover (available in white, red, or black) and mounting bracket (suitable for straight PCB terminal models for ATE toggle switches). If the operating force of the switch actuator exceeds 12.7 N, it is recommended to use a bracket. For more detailed information, please refer to the table below. Direct, right angle or vertical through-hole PCB installation standard, flat or locking rod optional alternating or instant switching optional color actuator cover to suit your application terminal spacing meets standard PCB grid separation. The maximum switch rating is 50 mA at 48 V AC/DC and the minimum rating is 1 μ A at 20 mV AC/DC. The electrical life when immersed in washable gold-plated contacts is 10000 cycles. The maximum contact resistance is 50 m Ω, The maximum resistance of ATE4 and ATLE toggle switches is 100 m Ω, and the minimum insulation resistance is 500 M Ω. The dielectric strength is 250 V AC per minute, and the voltage of ATE4 and ATLE toggle switches is 500 V AC per minute. The operating temperature range is -20 to+85 ° C. Additional information for ATE single pole double throw toggle switches - * * Stock Number * * | Manufacturer Part Number * * | * Switch Operation * * | P
    5033
    1+
    $44.0627
    10+
    $41.5346
    100+
    $39.6565
    250+
    $39.3675
    500+
    $39.0786
    1000+
    $38.7535
    2500+
    $38.4646
    5000+
    $38.2840
    PDF
    Contact
    Add to Cart Buy now pk
  • Model: ATE2G-2M3-10-Z
    Brand: Fujisoku
    Encapsulation:
    Category: toggle switch
    Description: Fujisoku Flip Switch - ATE Series Fuijsoku Miniature ATE Series Flip Switch features gold-plated contact points, allowing the switch to be used in many applications that require low switching currents as low as 1 μ A 20mV AC/DC. The PCB installation toggle switch certified by UL features an immersion washable structure and dual contact clamp, providing higher contact reliability. They also have a light touch function and a braking device. There are different types, including standard, flat, and locking rods, and single pole, double pole, and four pole contact configurations can be selected with alternating or momentary switching effects. Other options include straight, vertical, and right angle PCB mounting with pin spacing of 5.08 mm (0.2 ") or 7.62 mm (0.3"). The accessories for the ATE toggle switch include a glossy vinyl actuator cover (available in white, red, or black) and mounting bracket (suitable for straight PCB terminal models for ATE toggle switches). If the operating force of the switch actuator exceeds 12.7 N, it is recommended to use a bracket. For more detailed information, please refer to the table below. Direct, right angle or vertical through-hole PCB installation standard, flat or locking rod optional alternating or instant switching optional color actuator cover to suit your application terminal spacing meets standard PCB grid separation. The maximum switch rating is 50 mA at 48 V AC/DC and the minimum rating is 1 μ A at 20 mV AC/DC. The electrical life when immersed in washable gold-plated contacts is 10000 cycles. The maximum contact resistance is 50 m Ω, The maximum resistance of ATE4 and ATLE toggle switches is 100 m Ω, and the minimum insulation resistance is 500 M Ω. The dielectric strength is 250 V AC per minute, and the voltage of ATE4 and ATLE toggle switches is 500 V AC per minute. The operating temperature range is -20 to+85 ° C. Additional information for ATE single pole double throw toggle switches - * * Stock Number * * | Manufacturer Part Number * * | * Switch Operation * * | P
    5906
    5+
    $25.3539
    50+
    $24.2704
    200+
    $23.6636
    500+
    $23.5120
    1000+
    $23.3603
    2500+
    $23.1869
    5000+
    $23.0786
    7500+
    $22.9702
    PDF
    Contact
    Add to Cart Buy now pk
  • Model: ATE2N-6F3-10-Z
    Brand: Fujisoku
    Encapsulation:
    Category: Classification of electronic components
    Description: Fujisoku Flip Switch - ATE Series Fuijsoku Miniature ATE Series Flip Switch features gold-plated contact points, allowing the switch to be used in many applications that require low switching currents as low as 1 μ A 20mV AC/DC. The PCB installation toggle switch certified by UL features an immersion washable structure and dual contact clamp, providing higher contact reliability. They also have a light touch function and a braking device. There are different types, including standard, flat, and locking rods, and single pole, double pole, and four pole contact configurations can be selected with alternating or momentary switching effects. Other options include straight, vertical, and right angle PCB mounting with pin spacing of 5.08 mm (0.2 ") or 7.62 mm (0.3"). The accessories for the ATE toggle switch include a glossy vinyl actuator cover (available in white, red, or black) and mounting bracket (suitable for straight PCB terminal models for ATE toggle switches). If the operating force of the switch actuator exceeds 12.7 N, it is recommended to use a bracket. For more detailed information, please refer to the table below. Direct, right angle or vertical through-hole PCB installation standard, flat or locking rod optional alternating or instant switching optional color actuator cover to suit your application terminal spacing meets standard PCB grid separation. The maximum switch rating is 50 mA at 48 V AC/DC and the minimum rating is 1 μ A at 20 mV AC/DC. The electrical life when immersed in washable gold-plated contacts is 10000 cycles. The maximum contact resistance is 50 m Ω, The maximum resistance of ATE4 and ATLE toggle switches is 100 m Ω, and the minimum insulation resistance is 500 M Ω. The dielectric strength is 250 V AC per minute, and the voltage of ATE4 and ATLE toggle switches is 500 V AC per minute. The operating temperature range is -20 to+85 ° C. Additional information for ATE single pole double throw toggle switches - * * Stock Number * * | Manufacturer Part Number * * | * Switch Operation * * | P
    4977
    1+
    $45.7207
    10+
    $43.0974
    100+
    $41.1486
    250+
    $40.8488
    500+
    $40.5490
    1000+
    $40.2117
    2500+
    $39.9119
    5000+
    $39.7246
    PDF
    Contact
    Add to Cart Buy now pk
  • Model: LP2S-16S-K-Z
    Brand: Fujisoku
    Encapsulation:
    Category: Classification of electronic components
    Description: Fujisoku LED Lighting and Non Lighting Button Switch - LP Series Fujisoku LP Series is a set of LED lighting and non lighting button switches that use momentary on/off or alternating on/off switching operation. There are various types of terminal blocks to choose from, including printed circuit board installation or soldering terminal blocks, and other options include square or rectangular seat rings with various button colors. The switch with welded terminal blocks is designed for panel installation, with the switch body fastened into the panel cut. The panel thickness ranges from 1 to 2.5mm, and the fixing ribs on the switch housing ensure tight fixation. The switches installed on the printed circuit board comply with the standard grid separation of the printed circuit board. The LP series LED lighting switch features high brightness LEDs and a two-piece lens, which includes a transparent plate and a color button. Both the transparent plate and button can be printed or engraved with symbol sheets to suit your application. The non illuminated switch comes with a color button that can also be printed or engraved. The Fujisoku LP switch is suitable for many applications that require a compact body button switch, with a bite mechanism that allows users to operate with just a gentle touch. Optional lighting or non lighting LED, with panel or printed circuit board installation options, and using alternating (push lock) or instantaneous switching operation single pole double throw or double pole double throw red, green or yellow high brightness LED silver plated or gold-plated contact interlocking mechanism. Silver contact - maximum switch rating of 3A at 30V DC and 125/250V AC, minimum value of 10mA gold contact - maximum switch rating of 50mA at 48V AC/DC, minimum rating of 0.1mA at 20mV AC/DC, maximum contact resistance of 50m Ω (silver contact), maximum value of 100M Ω (gold contact), dielectric strength of 1500V AC (1 minute), insulation resistance of minimum 100M Ω silver contact - Electrical lifespan 30000 time
    3218
    1+
    $47.0383
    10+
    $44.3394
    100+
    $42.3345
    250+
    $42.0260
    500+
    $41.7176
    1000+
    $41.3706
    2500+
    $41.0621
    5000+
    $40.8694
    PDF
    Contact
    Add to Cart Buy now pk
  • Model: LP2S-27S-W-Z
    Brand: Fujisoku
    Encapsulation:
    Category: Classification of electronic components
    Description: Fujisoku LED Lighting and Non Lighting Button Switch - LP Series Fujisoku LP Series is a set of LED lighting and non lighting button switches that use momentary on/off or alternating on/off switching operation. There are various types of terminal blocks to choose from, including printed circuit board installation or soldering terminal blocks, and other options include square or rectangular seat rings with various button colors. The switch with welded terminal blocks is designed for panel installation, with the switch body fastened into the panel cut. The panel thickness ranges from 1 to 2.5mm, and the fixing ribs on the switch housing ensure tight fixation. The switches installed on the printed circuit board comply with the standard grid separation of the printed circuit board. The LP series LED lighting switch features high brightness LEDs and a two-piece lens, which includes a transparent plate and a color button. Both the transparent plate and button can be printed or engraved with symbol sheets to suit your application. The non illuminated switch comes with a color button that can also be printed or engraved. The Fujisoku LP switch is suitable for many applications that require a compact body button switch, with a bite mechanism that allows users to operate with just a gentle touch. Optional lighting or non lighting LED, with panel or printed circuit board installation options, and using alternating (push lock) or instantaneous switching operation single pole double throw or double pole double throw red, green or yellow high brightness LED silver plated or gold-plated contact interlocking mechanism. Silver contact - maximum switch rating of 3A at 30V DC and 125/250V AC, minimum value of 10mA gold contact - maximum switch rating of 50mA at 48V AC/DC, minimum rating of 0.1mA at 20mV AC/DC, maximum contact resistance of 50m Ω (silver contact), maximum value of 100M Ω (gold contact), dielectric strength of 1500V AC (1 minute), insulation resistance of minimum 100M Ω silver contact - Electrical lifespan 30000 time
    4073
    1+
    $56.1054
    10+
    $52.8862
    100+
    $50.4948
    250+
    $50.1269
    500+
    $49.7590
    1000+
    $49.3451
    2500+
    $48.9772
    5000+
    $48.7473
    PDF
    Contact
    Add to Cart Buy now pk

Product service

PLATFORM

CONTACT US

  • ICGOODFIND (Shenzhen) Electronics Technology Co., Ltd.
  • Address: Room 611, Block A, Aerospace Building, No. 4019, Shennan Avenue, Futian District, Shenzhen, Guangdong Province, China
  • Tel: +86-0755-82866643

CONTACT INFORMATION

  • WhatsApp：+8615820418003
  • Facebook Messenger：Emily He
  • WeChat：15820418003
  • Telegram：+8613641420552
  • Microsoft Teams：newkasion1
  • E-mail：sales@icgoodfind.com
  • Technical Cooperation：Ericguo@icgoodfind.com
Product Index：
Brand Index：
Friendship link : Chinese Electronic Component Distributor | STM | broadcom | Altera | ISSI | onsemi | nexperia | NXP | Microchip | diodes | lattice | Electronic Component Distributor | Analog Devices | XILINX | Texas Instruments | Infineon | TiToK | YouTube | X | Linkedln | Facebook | VK |

©Copyright 2013-2025 ICGOODFIND (Shenzhen) Electronics Technology Co., Ltd.

Scroll