Description
Teledyne LeCroy Passive probe PP024 is a standard probe that comes with most oscilloscopes. They are also sold as individual items and as spare parts. PP024 (PP024-1 single pack, PP024-2 two pack) has a bandwidth of 500 MHz, an input capacitance of 10 pF, and a probe tip diameter of 5 mm. It is a typical passive probe that provides 10:1 attenuation and has a high resistance of 10 M Ω. Its high input resistance makes this passive probe the best choice for instruments used for low-frequency signals, as it minimizes the circuit load at these frequencies. These passive probes are designed to handle voltages of at least 400 V. PP024 can handle up to 500 V. The Teledyne LeCroy passive probe has an attenuation sensing pin, which can activate the oscilloscope to automatically scale the waveform proportionally without the need for operator input. ###Note that the PP024 passive probe is compatible with Teledyne LeCroy WaveSurfer MXs-B and MSO MXs-B, WaveRunner 6 Zi, and HRO 12 oscilloscopes. Using a suitable passive probe for an oscilloscope means that the probe will be correctly compensated across the entire bandwidth range. Otherwise, only low-frequency compensation will be applied. ###Comes with rigid probe tip (installed), rigid probe tip (spare), fine-tuning tool, spring hook, color coded rings (2 per piece in yellow, red, green, blue), grounding lead (with alligator clip), grounding spring, printed circuit board adapter, BNC adapter 5mm, spring tip, probe tip cover, IC insulator (x2), tip insulator # # #, passive oscilloscope probe # # # Note: All products in this series are provided for use with tools with permanent grounding wires.
Delivery time
Packaging method
Standard packaging quantity
1
The most helpful review