Description
A22E The A22E series emergency stop switch is supplied as a complete or sub component device and can be installed in diameter holes of 22 mm or 25 mm. The switch device can be easily installed without the need for tools. When the contacts are welded, the direct opening mechanism can open the circuit safety lock mechanism to prevent operational errors. The lever is easy to install and remove. The switch block can be installed in series with three switch devices to improve wiring efficiency (using non lighting switch devices, three devices can be installed for multiple contacts). The finger protection mechanism on the switch element is provided as a standard feature. It can be installed with circular or fork type crimping terminals. Non lighting models IP65 (oil proof), lighting models IP65 Standard locking plate to ensure that the control box and switch are not easily separated # # # Fully assembled models are non illuminating, with lighting for 818-2009, 861-4616, 757-9089, 794-8823, 549-479, 794-8827, 794-8820, 841-1809, and 861-4610 (with emergency shutdown legend), no voltage reducing device, 757-9092, 794-8811, and 757-9095 # # # Switches with integrated control box non illuminating, 746-7154 and 746-7163 # # # Only operating devices non illuminating 746-7166 and 746-7157 # # Only switching devices No voltage reducing device, 861-4629 and 861-4622 with voltage reducing device, 861-4626 # # # accessory LED light, red, 24V AC/DC, 861-4635 emergency stop legend board, 60mm diameter 757-9109 emergency stop legend board, 60mm Diameter 746-7160 control box, yellow, single hole, 746-7179 emergency stop cover with emergency close legend, yellow, 746-7172 emergency stop cover, yellow, 746-7176 (no gasket) and 746-7185 (2 gaskets) # # # UL, cUL, TUV, CCC approved. ###Standard UL508 C22.2 No. 14, EN60947-5-1 and EN60947-5-5 (certification direct opening mechanism) GB14048.5、EN60947-5-1。 ###Emergency stop button
Delivery time
Packaging method
Bulk
Standard packaging quantity
1
The most helpful review