Description
IBT330 Battery detector and data logger are used to measure the internal resistance, open circuit voltage, and terminal temperature of rechargeable batteries (secondary batteries), including lead-acid, nickel cadmium, lithium-ion, and nickel metal hydride batteries. The comparator function for measuring internal resistance, voltage, current, and temperature compares the measured battery value with the user's preset high and low limit values. The manual and continuous data storage clamp adapter are used for DC current measurement. Battery capacity 0-1200AH load test analysis, automatic hold and automatic data storage up to 6000 sets of data recording capacity, software CD and optical RS-232 PC interface optional 300XP portable thermal printer for hard draft printing output * * Function * * | * Measurement range * * | * Basic accuracy * * * Resolution * * ---------- | Voltage | 6V and 60V | ± 0.1% reading ± 6 bits | 1 mV and 10 mV resistance | 4 m Ω → 400 Ω | ± 0.8% reading ± 6 bits @ 40 m Ω → 400 Ω | 1 μ Ω → 100 m Ω Temperature | -20 →+60 ° C | ± 1 ° C | 0.1 ° C Resistance measurement current @ 1 kHz | Approximately 40 mA → 1 μ A | | Maximum Battery test voltage | 60V DC | | comparator | 99 settings, LCD display shows pass, alarm or fault | | Power saving | Automatic power disconnection after 10 minutes | | Size and weight | 198 x 94 x 49 mm, 530 g (including battery) | | # # # Comes with clamp type test wire (with temperature sensor), pin type test wire, DCA current clamp adapter, zero adjustment board, AC adapter, instruction manual, 6 AA and 1 PP3 9V batteries, optical RS-232 cable, PC software CD, carrying case # # Battery accessories
Delivery time
Packaging method
Standard packaging quantity
1
The most helpful review