Technical parameters/number of contacts: 15
Technical parameters/polarity: Female
Technical parameters/insulation resistance: 1.00 GΩ
Technical parameters/capacitors: 3900 pF
Technical parameters/Flammability level: UL 94 V-0
Technical parameters/number of pins: 15
Technical parameters/Contact resistance: 10.0 mΩ
Technical parameters/number of plug and unplug cycles: 200
Encapsulation parameters/installation method: Through Hole
Physical parameters/contact material: Copper Alloy
Physical parameters/materials: Steel
Other/Packaging Methods: Tray
Compliant with standards/RoHS standards: RoHS Compliant
Compliant with standards/REACH SVHC standards: No SVHC
Compliant with standard/REACH SVHC version: 2015/12/17
| Model | Brand | Similarity | Encapsulation | Introduction | Data manual | |
|---|---|---|---|---|---|---|
1-106506-2
|
TE Connectivity | 类似代替 | Metal |
AMPLIMITE D-Sub 连接器，欧洲标准尺寸，印刷电路板安装 AMPLIMITE 直角安装印刷电路板安装 D-sub 插头和插座连接器，采用欧式标准尺寸。 这些 AMPLIMITE 印刷电路板 D-Sub 连接器具有镀锡钢外壳、黑色玻璃填充聚酯外壳和焊接端接，已预载镀金磷青铜触点。 提供各种安装硬件选件，用于这些 AMPLIMITE 印刷电路板 D-sub 插头和插座连接器，包括 3mm 孔、4-40 插件和 4-40，某些型号上还提供板锁，以确保安全连接到印刷电路板，有关详细信息，请参见数据表。 **Additional Data** --- **RS Stock Number** | **Manufacturer Part No.** | **Mating Connector Lock Type** | **Boardlocks** 718-3455 | 338168-2 | 3mm Hole | With 718-3711 | 106505-2 | 3mm Hole | With 718-3705 | 5-338168-2 | 3mm Hole | Without 718-3528 | 5-338170-2 | 3mm Hole | Without 718-3458 | 5-106505-2 | 3mm Hole | Without 718-3452 | 5-106507-2 | 3mm Hole | Without 718-3461 | 8-106505-2 | 4-40 screwlocks | Without 745-5090 | 6-106505-2 | 3mm Hole | Without ### TE Connectivity AMPLIMITE D - 超微型连接器 Amplimite 系列的连接器和附件。 适合于军事应用、工业应用或者商业应用和计算机接口连接等等
|
||
3-106506-2
|
Tyco Electronics | 类似代替 |
AMP FROM TE CONNECTIVITY 3-106506-2 连接器, D sub, 堆叠式, Amplimite HD-20系列, DB, 插座, 15 触点, 钢主体, 焊接
|
|||
FCE17-A15SB-440
|
Amphenol | 功能相似 |
Amphenol Right Angle B Connectors These Amphenol Filtered D-Sub FCE17 Series Right Angle Pin or Socket connectors are PCB mounted. Filter Capacitance of 470 pF and 820 pF are available indicated by a 1or 4 in the Manufacturers Part Number i.e. FCE17-*****-*X** respectively #4-40 UNC threaded Jack Screw holes PCB Footprint B (10.29 mm) Boardlocks are Tin plated Copper alloy Insulation Resistance 3000 MΩ Contact Resistance 15 mΩ ### 标准 UL94V-0 ### Amphenol Filtered "D" Connectors These filtered connectors are compact interconnect devices that can filter unwanted EMI. The capacitors are mounted inside the connector between each of the contacts and the connector ground shell. They provide: Better EMI Control – With minimized lead inductances and short, direct paths to ground of the filter, performance will typically out perform the same filter components on a P.C.B. by a factor of three to one PCB Space Savings – Incorporating filter elements into the connector, enables simplification of the required filter schematic for the necessary performance plus a savings of 2-4 square inches Cost Savings – Filter elements, such as inductors and capacitors, must no longer be purchased, stocked, assembled or tested. Fewer components means greater reliability at lower cost Easy EMI/RFI Upgrade – These compact filtered connectors fit standard non-filtered connector footprints. For improved EMC performance, simply replace the existing connector with a filtered connector EMC Compliance & Immunity – EMI that is generated from the electronic device, radiated or conducted, will be re-directed to chassis ground through the connector shell. This same device will also protect the system from external EMI/RFI noise (such as radio transmitters, ESD, or natural phenomena such as lightning) in the same way
|
©Copyright 2013-2025 ICGOODFIND (Shenzhen) Electronics Technology Co., Ltd.
The most helpful review