Description
2 Road, directional type, zero pressure, normally closed valve, 2-way directional solenoid valve, minimum working pressure 0 bar, normally open, threaded port connection brass body, no pressure required for tight and lightweight DIN plug connection, can be installed at any position. The pressure range is suitable for water and may vary for other media. Small solenoid valves are suitable for most gas and fluid processing applications. The schematic diagram illustrates the (circuit) functions of various solenoid valves. This diagram is developed in layers, and the left side of the diagram is sufficient to describe the operating condition of the valve when the coil is energized. When the coil loses power, the spring (or servo assist) re controls the valve, as described on the right side of the diagram. The 3/2-way design indicates that the valve has three ports and two operating modes. Usually, 2/2-way valves are referred to as two-way valves. The schematic diagram uses A, B, P, P1, P2, and R port markings, which are also indicated on the valve body. The valve body is usually marked for specific line functions and can also be used for other purposes. The schematic diagram and technical parameters will indicate the corresponding connections and pressure performance that require alternative circuit functions.
Sorry, I couldn't find the answer. You can click "Ask a Question" to submit this question to the official customer service and product manager of Suteshop Mall who have already purchased it. We will reply in a timely manner.
No questions have been asked yet
I'm not very familiar with the product yet. Just ask around
The most helpful review