Warm reminder: The pictures are for reference only. The actual product may vary
Collection
Description 250 W The 500 W Vishay Sfernice RPS series thick film non inductive resistor is used for heat sink installation, especially suitable for harsh pulse applications. The shell opening is easy to install and optimize, and the low heat radiation is installed on the heat sink. Power consumption at 70 ° C: | RPS 250DH: 250W ------- | RPS 500DH: 500W Tolerance: | ± 5% Temperature coefficient: | ± 250 ppm/° C (R | ± 150 ppm/° C (R1 Ω) Maximum service voltage: | 5 kV Effective value Thermal resistance: | RPS 250DH: 0.22 ° C/W | RPS 500DH: 0.11 ° C/W Dielectric stiffness: | 14 kV Effective value Operating temperature: | -55 ° C to+125 ° C # # # Non inductive - Panel installation # # # Non inductive - Heat sink can be mounted on almost non inductive, thick film power resistor, designed for direct connection of heat sink, suitable for installation in positions that require easy connection in limited space. Specially formulated metal ceramic film is attached to high-purity alumina, with a hard epoxy molded shell and integrated terminals inside. Values less than or equal to 1 Ω have 4 wiring terminals, allowing voltage induction; All other values have 2 wiring terminals for applications including circuits with main parameters of low inductance, high frequency, and pulse overload. **Application Description: * * Linear decrease from full power to zero power at 125 ° C for 25 and 50W types at 25 ° C and 100 and 250W types at 70 ° C. To achieve optimal thermal conductivity, it is recommended to use thermal paste between the aluminum oxide bottom surface and the radiator frame/surface. Main feature - Overload duration| RCH25 | RCH50 | BDS100 | BDS250 1 s | 375W | 750W | 200W | 1500W 2 s | 300W | 600W | 150W | 1250W 5 s | 125W | 250W | 125W | 1000W 10 s | 75W | 150W | 100W | 750W For every one degree increase in ambient temperature above 25 ° C, the allowable overload is reduced by 1%. The main feature table is only applicable to resistors appropriately installed on heat sinks, with a thermal resistance of 1 ° C/W at rated powers of
Product QR code
Packaging Panel
Delivery time
Packaging method
Standard packaging quantity 1
564.78  yuan 564.78yuan
  • Freight charges   In stock Freight rate:$13.00
  • Quantity
    Inventory(4027) Minimum order quantity(1)
Add to Cart Buy now
Welcome to use ICGOODFIND AI Assistant
Chip AI consultant  Chip AI consultant
Download related files
PDF
  • Disappointment
  • General
  • Satisfied
  • Like
  • Love it so much

Technical parameters/rated voltage (DC):

5.00 kV

 

Technical parameters/Insulation resistance:

1.00 TΩ

 

Technical parameters/tolerances:

±5 %

 

Technical parameters/rated power:

250 W

 

Technical parameters/resistance:

10 Ω

 

Technical parameters/resistance deviation:

±5 %

 

Technical parameters/operating temperature (Max):

125 ℃

 

Technical parameters/operating temperature (Min):

-55 ℃

 

Technical parameters/rated voltage:

5 kV

 

Encapsulation parameters/installation method:

Panel

 

Physical parameters/temperature coefficient:

±150 ppm/℃

 

Compliant with standards/RoHS standards:

RoHS Compliant

 

The most helpful review

  Only display evaluations with images

Latest Review

Load more

There is no evaluation yet

Looking forward to your sharing the joy brought by technology

Ask a question
Sorry, I couldn't find the answer. You can click "Ask a Question" to submit this question to the official customer service and product manager of Suteshop Mall who have already purchased it. We will reply in a timely manner.

No questions have been asked yet

I'm not very familiar with the product yet. Just ask around

Load more
    No data available for the time being.

Alternative material

Model Brand Similarity Encapsulation Introduction Data manual

Newly listed products

©Copyright 2013-2025 ICGOODFIND (Shenzhen) Electronics Technology Co., Ltd.

Scroll

Comparison

Unfold

pk

Clear