ROX3SJ1K5 In Stock|PDF|Datasheet|Price|Agent[ROX3SJ1K5 Alternative|Silk Screen|Technology|Solution Development]-ICGOODFIND

Warm reminder: The pictures are for reference only. The actual product may vary

Model ROX3SJ1K5

Description 3W Power metal oxide film resistors, ROX3S series, axial ROX3S series are flame-retardant power metal oxide film resistors that can withstand overload conditions and are particularly suitable for line protection applications. These resistors are suitable for processing power at 70 ° C on automatic insertion equipment, cutting machines, and bending machines. | 3W --- | Resistance tolerance | ± 5% temperature coefficient | ± 300ppm/° C Extreme component voltage | 350V overload voltage | 600V (maximum) insulation resistance | 1000M Ω working temperature | -55 ° C →+235 ° C body length | 15mm body diameter | 5.5mm lead length | 24mm lead diameter | 0.8mm # # # Power oxide resistors, axial -1-3W ROX series resistors have a layer of metal oxide film attached to the high voltage. On the quality alumina model. The quality of materials and processing allows for a reduction in physical dimensions to accommodate three power ratings with good long-term stability. The end cap and welding wire structure ensure high mechanical stability and strength. Specially formulated coatings can protect components from environmental conditions and withstand overload conditions without being damaged by flames or mechanical damage. Recommended for use in all applications where overload conditions will not cause combustion. Mark resistance values and tolerances using four band color codes according to IEC62. Rated at 70 ° C, horizontally installed in the atmosphere. Climate category 55/235/56.

Brand: TE Connectivity

Packaging 轴向引线

Delivery time

Packaging method Ammo Pack

Standard packaging quantity 1

Freight charges： In stock Freight rate：$13.00

Quantity：

Inventory(3833) Minimum order quantity(1)

Add to Cart Buy now

Welcome to use ICGOODFIND AI Assistant

Chip AI consultant

Download related files

PDF

Specification parameters
PDF
Silk screen printing
Review and share the purchase （0 ）
Product inquiry (0)
Selection Manual
Adapter model (0)

Technical parameters/rated voltage (DC):	350 V
Technical parameters/tolerances:	±5 %
Technical parameters/rated power:	3 W
Technical parameters/resistance:	1.5 kΩ
Technical parameters/resistance deviation:	±5 %
Technical parameters/operating temperature (Max):	235 ℃
Technical parameters/operating temperature (Min):	-55 ℃
Technical parameters/rated voltage:	350 V
Encapsulation parameters/installation method:	Through Hole
Package parameters/number of pins:	2
Encapsulation parameters/Encapsulation:	Axial lead
Dimensions/Length:	15 mm
Dimensions/Diameter:	Φ5.50mm
Dimensions/Foot Length:	28 mm
Dimensions/Packaging:	Axial lead
Physical parameters/operating temperature:	-55℃ ~ 155℃
Physical parameters/temperature coefficient:	±350 ppm/℃
Other/Product Lifecycle:	Active
Other/Packaging Methods:	Ammo Pack
Other/Minimum Packaging:	1000
Compliant with standards/RoHS standards:	RoHS Compliant
Compliant with standards/lead standards:	Lead Free
Compliant with standards/ELV standards:	Compliant
Compliant with the REACH SVHC standard:	No SVHC
Compliant with standard/REACH SVHC version:	2015/06/15

Alternative material

Model	Brand	Similarity	Encapsulation	Introduction	Data manual
MOR03SJ0152A19	Multicomp	完全替代	轴向引线	MULTICOMP MOR03SJ0152A19 通孔电阻器, MOR系列, 1.5 kohm, 3 W, ± 5%, 350 V, 轴向引线	PDF
ROX3SJ1K2	Tyco Electronics	类似代替		3W 功率金属氧化膜电阻器，ROX3S 系列，轴向 ROX3S 系列为阻燃功率金属氧化膜电阻器可耐受过载条件特别适用于线路保护应用这些电阻器适合在自动插入设备以及切割机和折弯机上处理 70°C 时功率 \| 3W ---\|--- 电阻容差 \| ±5% 温度系数 \| ±300ppm/°C 极限元件电压 \| 350V 过载电压 \| 600V（最大值）绝缘电阻 \| 1000MΩ 工作温度 \| \- 55 ° C → +235 ° C 主体长度 \| 15mm 主体直径 \| 5.5 mm 引线长度 \| 24 mm 引线直径 \| 0.8 mm ### 电源氧化物电阻器，轴向 - 1-3W ROX 系列电阻器有一层金属氧化膜，此膜附着在高质量的氧化铝模型上。材料和处理的质量允许物理尺寸减小，以适合三种具有良好长期稳定性的功率额定值。端盖和焊接线结构可确保高机械稳定性和高强度。专门配制的涂层可保护组件不受环境条件的影响，并能经受过载条件而不受火焰损坏或机械损坏。推荐在过载条件一定不会造成燃烧的所有应用下使用。按照 IEC62 用四带式颜色代码标记电阻值和容差。 70°C 时的额定值，在大气中水平安装。气候类别 55/235/56。	PDF
ROX3SJ1K2	TE Connectivity	类似代替	轴向引线	3W 功率金属氧化膜电阻器，ROX3S 系列，轴向 ROX3S 系列为阻燃功率金属氧化膜电阻器可耐受过载条件特别适用于线路保护应用这些电阻器适合在自动插入设备以及切割机和折弯机上处理 70°C 时功率 \| 3W ---\|--- 电阻容差 \| ±5% 温度系数 \| ±300ppm/°C 极限元件电压 \| 350V 过载电压 \| 600V（最大值）绝缘电阻 \| 1000MΩ 工作温度 \| \- 55 ° C → +235 ° C 主体长度 \| 15mm 主体直径 \| 5.5 mm 引线长度 \| 24 mm 引线直径 \| 0.8 mm ### 电源氧化物电阻器，轴向 - 1-3W ROX 系列电阻器有一层金属氧化膜，此膜附着在高质量的氧化铝模型上。材料和处理的质量允许物理尺寸减小，以适合三种具有良好长期稳定性的功率额定值。端盖和焊接线结构可确保高机械稳定性和高强度。专门配制的涂层可保护组件不受环境条件的影响，并能经受过载条件而不受火焰损坏或机械损坏。推荐在过载条件一定不会造成燃烧的所有应用下使用。按照 IEC62 用四带式颜色代码标记电阻值和容差。 70°C 时的额定值，在大气中水平安装。气候类别 55/235/56。	PDF