Chip AI consultant
Technical parameters/rated power: | 250 W |
|
Technical parameters/number of output interfaces: | 1 |
|
Technical parameters/output voltage: | 12.0 V |
|
Technical parameters/output current: | 20.8A, 10.3A |
|
Dimensions/Length: | 127 mm |
|
Dimensions/Width: | 76.2 mm |
|
Dimensions/Height: | 33.5 mm |
|
Compliant with standards/RoHS standards: | RoHS Compliant |
|
Compliant with standards/lead standards: | Lead Free |
|
| Model | Brand | Similarity | Encapsulation | Introduction | Data manual | |
|---|---|---|---|---|---|---|
LPS173-M-C
|
Artesyn Embedded Technologies | 功能相似 | 封闭 |
175W Universal Input, Single Output Medically Approved LP Series Medical safety approvals Active power factor correction IEC EN61000-3-2 compliance Wide range adjustable output Remote sense on main output Single wire current sharing Power fail and remote inhibit Built-in EMI filter Low output ripple Over voltage protection Overload protection Thermal overload protection DC power good indication 5V standby output 12V Aux. output Frequency | 47-63Hz | ---|---|--- Minimum Load | 0A | Connection | Molex KK (not supplied) | Power Ratings | Convection | Forced air | 110W, 75W with cover | 175W, 130W with cover Forced air ratings require a user supplied air flow of 30CFM at 50°C. Ratings are reduced when using a cover. | | ### 注 Derating from 50 to 70°C is 2.5% per °C. ### 标准 VDE 0750 / EN60601-1; UL2601; CSA 22·2 No 601·1 ### 开关模式 - Astec LP 与 NT 系列，110 至 350W
|
©Copyright 2013-2025 ICGOODFIND (Shenzhen) Electronics Technology Co., Ltd.
The most helpful review