Model/Brand/Package
Category/Description
Inventory
Price
Data
-
![]()
Category: Oscilloscope and accessoriesDescription: Teledyne LeCroy PPE The LeCroy PPE series of high-voltage passive probes are widely used in fields where high-voltage measurement must be safe and accurate. The new technology uses hybrid circuits to reduce noise and overshoot to provide precise response. The fixed attenuation standard probe can automatically readjust any LeCroy 9300C or LC series oscilloscope to appropriately attenuate the probe factor. ###Note probe ring: PPE1.2KV=No; PPE20KV, PPE2KV, PPE4KV, PPE5KV, PPE6KV=cable length: PPE20kv=3m; PPE1.2kV, PPE2kV, PPE4kV, PPE5kV, PPE6kV=2m PPE20KV peak voltage=40kV # # # High voltage oscilloscope probe6814 -
![]()
Category: Oscilloscope and accessoriesDescription: Teledyne LeCroy Passive probe PP022 is a standard probe that comes with most oscilloscopes. They are also sold as individual items and as spare parts. PP022 (PP022-1 single pack, PP022-2 two pack) has a bandwidth of 500 MHz, an input capacitance of 10 pF, and a probe tip diameter of 2.5 mm. It is a typical passive probe that provides 10:1 attenuation and has a high resistance of 10 M Ω. Its high input resistance makes this passive probe the best choice for instruments used for low-frequency signals, as it minimizes the circuit load at these frequencies. These passive probes are designed to handle voltages of at least 400 V. PP022 can handle up to 500 V. The Teledyne LeCroy passive probe has an attenuation sensing pin, which can activate the oscilloscope to automatically scale the waveform proportionally without the need for operator input. ###Note that the PP022 passive probe is compatible with Teledyne LeCroy WaveSurfer MXs-B and MSO MXs-B, WaveRunner 6 Zi, and HRO 12 oscilloscopes. Using a suitable passive probe for an oscilloscope means that the probe will be correctly compensated across the entire bandwidth range. Otherwise, only low-frequency compensation will be applied. ###Grounding lead, rigid probe tip (installed), rigid probe tip (spare), short collar (installed), spring hook, fine adjustment tool, long collar, IC insulator (black, brown, blue, green, gray -1 piece per piece), tip insulator 2.5 mm, probe tip cover, BNC adapter 2.5 mm, rotating grounding lead, rotating grounding lead adapter, grounding spring, printed circuit board adapter, spring tip, color coded ring (yellow, red, green, blue -2 pieces per piece), # # # Passive oscilloscope probe # # Note: All products in this series are available for use with tools with permanent grounding wires.6990 -
![]()
Category: Oscilloscope and accessoriesDescription: Teledyne LeCroy Passive probe users do not need to input, LeCroy passive probe can automatically scale oscilloscope waveforms. They are optimized for maximum waveform fidelity, including high-frequency signal components, designed to be robust and suitable for daily use. ###Note that PP007-WR is designed for the WaveRunner 6000 series, while PP007-WS is designed for the WaveSurfer 400 series oscilloscope. The physical design of these two probes is the same. All connection attachments, standards, and options are suitable for both models. PP008-1 is suitable for use with WaveRunner Xi series oscilloscopes. ###Passive oscilloscope probe # # # Note provides all products in this series for use with tools with permanent grounding wires.8951 -
![]()
Category: Oscilloscope and accessoriesDescription: Teledyne LeCroy Passive probe users do not need to input, LeCroy passive probe can automatically scale oscilloscope waveforms. They are optimized for maximum waveform fidelity, including high-frequency signal components, designed to be robust and suitable for daily use. ###Note that PP007-WR is designed for the WaveRunner 6000 series, while PP007-WS is designed for the WaveSurfer 400 series oscilloscope. The physical design of these two probes is the same. All connection attachments, standards, and options are suitable for both models. PP008-1 is suitable for use with WaveRunner Xi series oscilloscopes. ###Passive oscilloscope probe # # # Note provides all products in this series for use with tools with permanent grounding wires.5067 -
![]()
Category: Oscilloscope and accessoriesDescription: Teledyne LeCroy High voltage differential probe HVD3106 120MHz HVD3106 (851-3096) High voltage active differential probe is safe, easy to use, and particularly suitable for power electronic measurement. CMRR has excellent functionality at very high frequencies. This is very helpful for measuring signals in noisy, typically high common mode environments with power electronics activity. The combination of high CMRR, low probe noise, and high offset function enables HVD3106 to measure very small control signal fluctuations under high common mode voltage. 80MHz HVD3106-6M (878-7601) comes with a 6m cable. 120MHz HVD3106-NOACC (901-0999) without tip attachments. The spare accessory kit PK-HV-001 (901-1043) is provided separately and includes 2 of each of the following items (1 black, 1 red): safety crocodile clamp, plunger wire clamp, plunger hook clamp, plunger crocodile clamp, and shovel shaped terminal block. The differential voltage measurement function can reach up to 1000 Vrms and has excellent common mode rejection ratio (CMRR) across the entire frequency range. It has a wide differential pressure range of 1500 Vp-p and 2000 Vp-p before saturation, and is used to capture short-term overshoot. It has high offset function under high and low attenuation, 1% DC and low-frequency gain accuracy ProBus active probe interface, with automatic calibration and zero adjustment function. It comes with 1 red and 1 black flat connector, safety crocodile clip, plunger crocodile clip, plunger wire clip, and plunger hook clip; Soft accessory box; Operation manual; Calibration certificate (limited to 851-3096 and 878-760-1901-0999 without tip attachment) # # # Differential oscilloscope probe9771 -
![]()
Category: Oscilloscope and accessoriesDescription: Digital LeCroy MSO64MXs-B 600MHz 22Channel 5 null 16 null 8Bit Digital storage (DSO), Mixed signal (MSO)2040 -
![]()
Category: Oscilloscope and accessoriesDescription: HDO4104 1GHz, 4CH., 2.5 GS/s + Free Options7808 -
![]()
Category: Oscilloscope and accessoriesDescription: LeCroy WaveAce 1000 和 2000 系列 LeCroy WaveAce 1000 和 2000 型号是小型经济实惠的示波器，它提供强大的属性组合，包括长期记忆、彩屏、广泛的测量功能、高级触发和极佳的连接性，可增强故障诊断并缩短调试时间。 7 英寸宽屏彩色显示屏可显示多达 5 个测量值，节省空间 使用测量仪表板可同时显示 32 个自动测量值 5 种数学功能，以进行额外的分析（包括加、减、乘、除和 FFT） 可通过 4 个视窗和 2 个垂直刻度查看 FFT，以获取对频率域的精辟见解 内置通过/失败掩码测试，可快速识别问题并在问题发生时突出显示 大型内部波形和设置存储 用于打印机、记忆棒和 PC 远程控制的 USB 连接 ### 注 WaveAce 软质携带箱 724-0937 (WA-SOFTCASE) 单独提供 ### 随附 10:1、1:1 可切换无源探头（每通道一个）；多语言用户界面和帮助； WaveStudio 附随 USB 电缆；入门手册；校准和性能证书 ### Teledyne LeCroy 数字示波器 ### LeCroy 数字示波器4936 -
![]()
Category: Oscilloscope and accessoriesDescription: LeCroy WaveAce 1000 和 2000 系列 LeCroy WaveAce 1000 和 2000 型号是小型经济实惠的示波器，它提供强大的属性组合，包括长期记忆、彩屏、广泛的测量功能、高级触发和极佳的连接性，可增强故障诊断并缩短调试时间。 7 英寸宽屏彩色显示屏可显示多达 5 个测量值，节省空间 使用测量仪表板可同时显示 32 个自动测量值 5 种数学功能，以进行额外的分析（包括加、减、乘、除和 FFT） 可通过 4 个视窗和 2 个垂直刻度查看 FFT，以获取对频率域的精辟见解 内置通过/失败掩码测试，可快速识别问题并在问题发生时突出显示 大型内部波形和设置存储 用于打印机、记忆棒和 PC 远程控制的 USB 连接 ### 注 WaveAce 软质携带箱 724-0937 (WA-SOFTCASE) 单独提供 ### 随附 10:1、1:1 可切换无源探头（每通道一个）；多语言用户界面和帮助； WaveStudio 附随 USB 电缆；入门手册；校准和性能证书 ### Teledyne LeCroy 数字示波器 ### LeCroy 数字示波器4534 -
![]()
Category: Oscilloscope and accessoriesDescription: LeCroy WaveAce 1000 和 2000 系列 LeCroy WaveAce 1000 和 2000 型号是小型经济实惠的示波器，它提供强大的属性组合，包括长期记忆、彩屏、广泛的测量功能、高级触发和极佳的连接性，可增强故障诊断并缩短调试时间。 7 英寸宽屏彩色显示屏可显示多达 5 个测量值，节省空间 使用测量仪表板可同时显示 32 个自动测量值 5 种数学功能，以进行额外的分析（包括加、减、乘、除和 FFT） 可通过 4 个视窗和 2 个垂直刻度查看 FFT，以获取对频率域的精辟见解 内置通过/失败掩码测试，可快速识别问题并在问题发生时突出显示 大型内部波形和设置存储 用于打印机、记忆棒和 PC 远程控制的 USB 连接 ### 注 WaveAce 软质携带箱 724-0937 (WA-SOFTCASE) 单独提供 ### 随附 10:1、1:1 可切换无源探头（每通道一个）；多语言用户界面和帮助； WaveStudio 附随 USB 电缆；入门手册；校准和性能证书 ### Teledyne LeCroy 数字示波器 ### LeCroy 数字示波器1612 -
![]()
Category: Oscilloscope and accessoriesDescription: LeCroy WaveAce 1000 和 2000 系列 LeCroy WaveAce 1000 和 2000 型号是小型经济实惠的示波器，它提供强大的属性组合，包括长期记忆、彩屏、广泛的测量功能、高级触发和极佳的连接性，可增强故障诊断并缩短调试时间。 7 英寸宽屏彩色显示屏可显示多达 5 个测量值，节省空间 使用测量仪表板可同时显示 32 个自动测量值 5 种数学功能，以进行额外的分析（包括加、减、乘、除和 FFT） 可通过 4 个视窗和 2 个垂直刻度查看 FFT，以获取对频率域的精辟见解 内置通过/失败掩码测试，可快速识别问题并在问题发生时突出显示 大型内部波形和设置存储 用于打印机、记忆棒和 PC 远程控制的 USB 连接 ### 注 WaveAce 软质携带箱 724-0937 (WA-SOFTCASE) 单独提供 ### 随附 10:1、1:1 可切换无源探头（每通道一个）；多语言用户界面和帮助； WaveStudio 附随 USB 电缆；入门手册；校准和性能证书 ### Teledyne LeCroy 数字示波器 ### LeCroy 数字示波器3939 -
![]()
Category: Oscilloscope and accessoriesDescription: Digital LeCroy WAVEACE 2002 70MHz 2Channel 1 null 12 null 8Bit Digital storage (DSO)2413
