Description:
Flexi-Blocks®，These pre lubricated flexible plates are suitable for five progressive cable diameters and are particularly suitable for on-site installation work where the exact diameter of the cable or pipeline may be unknown. Pull off the inserted sheet and fold it directly into the carrier board to match the corresponding cable or pipeline, and remove the unnecessary sheet. Each board provides a pair of individual half boards, and each pulled thin board clearly marks the diameter of the cable/pipe in millimeters. The carrier board can be used independently without any insertion of thin plates, and is also marked with a diameter (in millimeters). The plug board is a flexible solution for sealing cables and pipelines through walls/metal objects or floors. The main components of the optional transmission seal; One is a circular plug for inserting circular pipes or conduits - a circular system, and the other is a rectangular metal frame widely used in customer defined applications. Lubricant hoses are also provided - only for packing plates (as needed) and the internal surfaces of rectangular frames. Do not lubricate the outer surface of the circular plug seal, or lubricate the holes, pipes, or conduits where it is installed
Description:
U The U-shaped plate with a solid cross-section fills the excess space inside the circular plug or rectangular frame, and can accommodate solid or flexible filler plates. It allows future cables or pipelines to meet installation requirements. Each U-shaped plate is designed for fixed installation within the maximum possible size. The average length is 60mm. The solid board is also 60mm long, providing 10x10mm and 20x20mm square sections. Except for the 10mm board (which provides 12 strips sufficient to fully fill the entire width), all other boards are sold separately. The compatibility table provides detailed instructions for other U-shaped sections, while solid plates can be used with each U-shaped plate. The plug board is a flexible solution for sealing cables and pipelines through walls/metal objects or floors. The main components of the optional transmission seal; One is a circular plug for inserting circular pipes or conduits - a circular system, and the other is a rectangular metal frame widely used in customer defined applications. Lubricant hoses are also provided - only for packing plates (as needed) and the internal surfaces of rectangular frames. Do not lubricate the outer surface of the circular plug seal, or lubricate the holes, pipes, or conduits where it is installed
