Description:
Marking tape with protective cover Delivered on cards with 9 pces. 25 x 70 mm. Max. cable diameter: 16 mm. Use ballpoint pen, pencil or spirit pen. Temperature range: -30 °C → +70 °C Writing surface: 20 x 25 mm. ### Cable identification
Description:
Neoprene grommets, type DA Resistant to heat, ageing, ozone, oil and petrol. Dimensions: 14 mm x 20 mm x 28 mm x 1.5 mm x 4 mm ### General
Description:
30 Up to 90 ° C (short-term up to+110 ° C), the flame retardant rating reaches UL94 V-O, with good mechanical properties and good resistance to ozone, aromatic fuels, moisture, and oil. It has a fracture stress of 600%, resistivity of 4 x 109 Ω m, dielectric strength of 13kV working temperature, flame retardant rating from -30 ° C to+130 ° C, and UL94V-0 # # # extendable sleeve
Description:
Neoprene grommets, type DA Resistant to heat, ageing, ozone, oil and petrol. Dimensions: 14 mm x 20 mm x 28 mm x 1.5 mm x 4 mm ### General
Description:
SES Rubber Grommets, DG Series The HELAVIA DG membrane grommets from SES are made from black polychloroprene rubber. They can be used to protect cables and wires when being passed through panels. These rubber grommets can also be used to seal off any unused entries in panels and enclosures. ### Features and Benefits Black polychloroprene rubber Available with 1 mm and 1.5 mm thick membranes Tensile strength at break: 7 MPa Ultimate elongation: >400% Dielectric strength: >13 kV/mm RoHS compliant ### General
Description:
PLIOSIL woven heat shrink tubing This plastic tubing can, when drawn in its length, adapt to various cable diameters, but is sprung, so it returns to its smallest diameter. The cut ends should be protected against disintegration by being melted using a soldering iron. Temperature range: -50 °C → +130 °C Colour: Black ### Standard woven sleeve
Description:
Neoprene grommets, type DA Resistant to heat, ageing, ozone, oil and petrol. Dimensions: 14 mm x 20 mm x 28 mm x 1.5 mm x 4 mm ### General
Description:
Neoprene grommets, type DA Resistant to heat, ageing, ozone, oil and petrol. Dimensions: 14 mm x 20 mm x 28 mm x 1.5 mm x 4 mm ### General
Description:
SES fault marking label, Spot-it, S5/04 Uses include marking of faults on printed circuit boards. Material: Cotton with vinyl protection. Card with 752 yellow labels, each with a small black arrow. ### Cable identification
Description:
20mm The tape is made of cross-linked polyolefin and has the property of shrinkage temperature when it exceeds 130 ° C. Provide a 50m roll that can automatically weld the tape at high temperatures. The tape tightens on the wrapped object, forming a continuous insulation and anti-seepage wall. Width: 20mm, thickness: 0.07mm. # # # General repair tape
Description:
Grommets with cable grip Waterproof with correct cable diameter. Manufactured from chloroprene, ensuring good electrical insulation and mechanical properties. Made in i PVC for panel thickness 1.5 → 2.0 mm. Associated grip clamp grips cable that can have a maximum diameter of 5.8 mm. Installation hole 12 mm. ### 认可 DEMKO ### 通用
