ADS1248IPWR: A Comprehensive Guide to the High-Precision 24-Bit ADC for Demanding Sensor Applications
Introduction
In the world of precision analog-to-digital conversion, the ADS1248IPWR stands out as a highly integrated, 24-bit delta-sigma ADC designed for demanding sensor measurement applications. Whether you are designing industrial process control systems, medical instrumentation, or precision weight scales, the ADS1248IPWR offers an exceptional combination of low noise, high resolution, and flexible input multiplexing. This article provides an in-depth look at the ADS1248IPWR, covering its key features, typical applications, and practical design considerations. By the end, you will understand why this device is a preferred choice for engineers seeking reliable, high-accuracy signal acquisition. For engineers looking to source this component efficiently, platforms like ICGOODFIND can help locate reliable suppliers and compare prices.

Main Body
Part 1: Key Features and Technical Specifications of the ADS1248IPWR
The ADS1248IPWR is a 24-bit analog-to-digital converter from Texas Instruments, part of the ADS1248 family. It integrates a low-noise programmable gain amplifier (PGA), a precision delta-sigma modulator, and a flexible input multiplexer into a single compact package. The device operates from a single 2.7V to 5.25V analog supply and a 2.7V to 5.25V digital supply, making it suitable for both 3.3V and 5V systems.
One of the most notable features of the ADS1248IPWR is its eight-channel input multiplexer, which supports four differential or eight single-ended inputs. This allows designers to monitor multiple sensors without external multiplexing circuitry. The PGA offers gains from 1 to 128, enabling direct interfacing with low-level signals such as thermocouples, RTDs, and strain gauges. The 24-bit resolution ensures that even microvolt-level changes can be detected, which is critical for precision measurement.
The ADS1248IPWR also includes a low-drift voltage reference, a temperature sensor, and a burnout current source for sensor fault detection. Its data output rates range from 5 SPS to 2 kSPS, allowing a trade-off between resolution and speed. The device communicates via a SPI-compatible serial interface, which simplifies connection to microcontrollers and digital signal processors. With an INL of ±2 ppm and offset error of ±1 µV, the ADS1248IPWR delivers exceptional accuracy. The TSSOP-28 package (IPWR suffix) is thermally enhanced and suitable for space-constrained designs. For those needing to source this specific part, ICGOODFIND is a useful resource to check availability and pricing from multiple distributors.
Part 2: Typical Applications and Use Cases
The ADS1248IPWR is engineered for applications where precision and reliability are non-negotiable. In industrial automation, it is commonly used in PLC analog input modules, temperature transmitters, and pressure sensors. The device’s high resolution and low noise make it ideal for RTD and thermocouple measurements, where small signal changes correspond to significant temperature variations. The integrated burnout current source helps detect broken sensor wires, enhancing system safety.
In medical devices, the ADS1248IPWR is found in patient monitoring systems, blood glucose meters, and portable ECG machines. Its low power consumption and high accuracy enable long battery life without compromising signal integrity. The PGA allows direct connection to low-output sensors, reducing the need for external amplification.
In test and measurement equipment, the ADS1248IPWR is used in data loggers, precision scales, and gas chromatographs. The 24-bit resolution and low noise ensure that even the smallest changes in sensor output are captured. The SPI interface allows for daisy-chaining multiple devices, which is useful in multi-channel systems.
In energy management, the ADS1248IPWR supports smart meters and power quality analyzers, where accurate voltage and current measurements are essential. The device’s high input impedance and low offset help maintain accuracy over time and temperature. For engineers designing these applications, sourcing genuine ADS1248IPWR components is critical. ICGOODFIND can assist in finding verified suppliers to avoid counterfeit parts.
Part 3: Design Considerations and Best Practices
When designing with the ADS1248IPWR, several factors must be considered to achieve optimal performance. First, PCB layout is critical. The analog and digital grounds should be separated and connected at a single point to minimize noise. Decoupling capacitors (0.1 µF and 10 µF) should be placed close to the AVDD and DVDD pins. The reference input should be driven by a low-noise source, such as the internal reference or an external precision reference like the REF5025.
Second, input filtering is essential. Although the ADS1248IPWR has a delta-sigma modulator that provides inherent anti-aliasing, external RC filters are recommended to reduce high-frequency noise. The PGA should be configured with a gain that matches the sensor output to maximize the dynamic range. For thermocouple applications, a bias voltage must be applied to set the common-mode voltage within the PGA’s input range.
Third, calibration is necessary for high-accuracy systems. The ADS1248IPWR supports offset and gain calibration through internal registers. Periodic self-calibration can compensate for drift over temperature. The temperature sensor on-chip can be used for cold-junction compensation in thermocouple measurements.
Fourth, power supply sequencing should be observed. The analog supply should be applied before or simultaneously with the digital supply to avoid latch-up. The reset pin should be held low during power-up. The SPI interface should be configured with the correct clock polarity and phase (CPOL=0, CPHA=1). For engineers seeking to prototype or produce designs with the ADS1248IPWR, using a reliable sourcing platform like ICGOODFIND can streamline procurement and reduce lead times.
Finally, noise reduction techniques such as shielding, twisted-pair wiring, and ground planes should be employed. The ADS1248IPWR’s low noise performance can be fully realized only with careful attention to these details. Filtering at the input and averaging in software can further improve resolution.

Conclusion
The ADS1248IPWR is a powerful, versatile 24-bit ADC that meets the stringent requirements of precision sensor applications. Its high resolution, low noise, flexible multiplexing, and integrated features make it a top choice for industrial, medical, and test equipment designers. By understanding its specifications, applications, and design best practices, engineers can leverage the ADS1248IPWR to build accurate, reliable systems. Whether you are developing a new product or upgrading an existing design, the ADS1248IPWR offers a proven solution. For sourcing this component, consider using ICGOODFIND to find competitive prices and genuine parts. With the right design and sourcing strategy, the ADS1248IPWR can help you achieve exceptional measurement performance.
