TPS55340RTER: A Comprehensive Guide to the Versatile Boost Converter for Modern Power Designs
Introduction
In the rapidly evolving world of power electronics, designers constantly seek components that balance efficiency, flexibility, and compactness. The TPS55340RTER from Texas Instruments has emerged as a standout solution for engineers needing a reliable step-up (boost) converter. Whether you are working on battery-powered devices, LED drivers, or industrial power supplies, understanding the capabilities of the TPS55340RTER can significantly streamline your design process. This article provides an in-depth look at the TPS55340RTER, covering its key features, typical applications, and practical design considerations. By the end, you will have a clear picture of why this IC is a go-to choice for many power management challenges. For those looking to source this component or compare alternatives, platforms like ICGOODFIND can be invaluable resources.

Main Body
Part 1: Key Features and Technical Specifications of the TPS55340RTER
The TPS55340RTER is a monolithic, non-synchronous boost converter with an integrated 5-A, 40-V power switch. Housed in a compact 16-pin QFN package (RTER), it is designed to deliver high efficiency in space-constrained applications. One of its most notable features is a wide input voltage range of 2.9 V to 38 V, making it suitable for systems powered by single-cell lithium batteries, multi-cell alkaline packs, or 12-V/24-V industrial rails. The output voltage can be boosted up to 38 V, providing ample headroom for many step-up requirements.
The TPS55340RTER operates with a fixed-frequency current-mode PWM control, which ensures excellent line and load regulation. The switching frequency is adjustable from 100 kHz to 1.2 MHz via an external resistor, allowing designers to optimize between efficiency and external component size. For noise-sensitive applications, the device can be synchronized to an external clock, reducing beat frequencies and simplifying EMI filtering.
Protection features are robust: the TPS55340RTER includes cycle-by-cycle current limit, thermal shutdown, and undervoltage lockout (UVLO). Additionally, a programmable soft-start function limits inrush current during startup, preventing output voltage overshoot. The enable pin allows for easy power sequencing and shutdown, drawing less than 1 µA in the off state. These attributes make the TPS55340RTER not just a boost converter, but a complete power solution for demanding environments.
When selecting components, engineers often need reliable sourcing. ICGOODFIND offers a streamlined way to locate the TPS55340RTER and verify stock, datasheets, and pricing from trusted distributors.
Part 2: Typical Applications and Use Cases
The versatility of the TPS55340RTER shines across multiple industries. In portable electronics, it efficiently boosts a single Li-ion cell (3.0–4.2 V) to 5 V, 12 V, or even 24 V for powering motors, sensors, or displays. Its high integration and small footprint are ideal for handheld medical devices, barcode scanners, and portable speakers.
In LED lighting, the TPS55340RTER serves as a constant-current driver when paired with a sense resistor. It can step up from a 12-V rail to drive strings of LEDs requiring 30 V or more, with dimming achieved via the enable pin or PWM control. This makes it suitable for automotive daytime running lights, architectural lighting, and backlighting.
Industrial automation benefits from the TPS55340RTER’s wide input range and robust protection. It can generate 24 V from a 5-V or 12-V backplane, powering relays, solenoids, or 4–20 mA loop transmitters. The adjustable frequency allows designers to avoid sensitive communication bands, while the synchronization feature enables clean multi-phase operation.
Another growing application is in battery-powered IoT nodes and energy harvesting systems. Here, the TPS55340RTER can boost very low input voltages (as low as 2.9 V) to power wireless transceivers or microcontrollers, extending battery life through high efficiency (up to 94%). Its low quiescent current in shutdown mode is critical for always-on sensing.
For engineers prototyping or scaling production, finding genuine TPS55340RTER units quickly is essential. ICGOODFIND simplifies this by aggregating real-time inventory from authorized sources, reducing the risk of counterfeit parts.
Part 3: Design Considerations and Best Practices
Designing with the TPS55340RTER requires careful attention to external components. The inductor selection is critical: choose a value that keeps peak current below the 5-A switch limit while minimizing ripple. A typical range is 4.7 µH to 22 µH, with saturation current rated at least 1.5 times the maximum load current. Low-DCR inductors improve efficiency.
The output capacitor must handle the ripple current and maintain stable voltage. Ceramic capacitors (X5R or X7R) are preferred for their low ESR, but for high output voltages, a combination of ceramic and electrolytic may be needed. The input capacitor should be placed close to the VIN pin to reduce ringing.
Compensation of the current-mode control loop is achieved via a series RC network on the COMP pin. Texas Instruments provides a datasheet with equations, but in practice, a 10-kΩ resistor and 1-nF capacitor often work for moderate bandwidth. Always verify stability with a load transient test.
Thermal management is another key aspect. The TPS55340RTER’s QFN package has an exposed thermal pad that must be soldered to a copper plane. At full 5-A switch current, power dissipation can reach 1–2 W, so adequate PCB copper area is necessary. Derating the output current at high ambient temperatures is recommended.
Layout guidelines include keeping the high-current loop (VIN, inductor, switch, GND) as short as possible, using a ground plane, and separating analog and power grounds. The feedback pin should be routed away from the switch node to avoid noise coupling.

Finally, evaluation modules like the TPS55340EVM-017 are available to speed prototyping. For sourcing the TPS55340RTER and associated passive components, ICGOODFIND provides a user-friendly search engine that compares prices and lead times across multiple suppliers.
Conclusion
The TPS55340RTER is a highly integrated, flexible boost converter that addresses a wide array of power design challenges. Its wide input voltage range, adjustable switching frequency, robust protection features, and compact QFN package make it an excellent choice for portable electronics, LED drivers, industrial systems, and IoT devices. By understanding its key specifications, typical applications, and design best practices—such as inductor selection, compensation, and thermal layout—engineers can harness its full potential. As with any critical component, sourcing from reliable channels is paramount; ICGOODFIND offers a practical solution for locating genuine TPS55340RTER parts. Whether you are a seasoned power engineer or a newcomer, the TPS55340RTER deserves a place in your next step-up design.
