Description:
6P+E Anti splash IP44 connector with nickel plated brass contacts for extreme operating environments. The shell provides impact resistance from -25 to+55 ° C and is equipped with a glass fiber reinforced nylon contact carrier, which has excellent tracking and heat resistance characteristics. These connectors are particularly suitable for connecting star delta motors and DOL motors that require auxiliary contacts. They can also be used in conjunction with remote control devices for electrical interlocking and connect multiple lighting accessories on a single-phase circuit through a single connector. ###Note that the 16A plug accepts cables with a maximum diameter of 16mm and the 32A plug with a diameter of 22mm. The power input port of the Mennekes equipment meets the latest requirements of British and European standards. The insulation shell and interior are made of Amaplast (nylon 6), which provides excellent mechanical properties between -25 ° C and+55 ° C (ambient temperature). This material has good electrical insulation and meets the requirements of most industrial environments. The conductive tube and pins are made of brass. For each voltage, in order to prevent incorrect connections, the grounding contacts are located in different positions relative to the safety keyway on each socket. All types are color coded according to voltage markings and are suitable for 50/60Hz operation.
Description:
16A Surface mounted socket with switch. There are two M25mm conduit entry ports at the top (one of which is closed), and two at the bottom (both closed), providing IP44 or IP67 options # # # Mennekes conversion interlock
Description:
M20 Connect and spring cover to enhance intrusion protection when not in use. All products have been tested to comply with VDE models. ###The power input port of Mennekes equipment meets the latest requirements of British and European standards. The insulation shell and interior are made of Amaplast (nylon 6), which provides excellent mechanical properties between -25 ° C and+55 ° C (ambient temperature). This material has good electrical insulation and meets the requirements of most industrial environments. The conductive tube and pins are made of brass. For each voltage, in order to prevent incorrect connections, the grounding contacts are located in different positions relative to the safety keyway on each socket. All types are color coded according to voltage markings and are suitable for 50/60Hz operation.
Description:
Mennekes This cable installation free plug is designed for industrial applications. This plug is sturdy and easy to assemble, with a back out terminal screw facing a single path, further simplifying assembly. Large area terminal block, accepting up to 2.5mm ² 16A wire and 6mm ² 32A wire
Description:
M20 Connect and spring cover to enhance intrusion protection when not in use. All products have been tested to comply with VDE models. ###The power input port of Mennekes equipment meets the latest requirements of British and European standards. The insulation shell and interior are made of Amaplast (nylon 6), which provides excellent mechanical properties between -25 ° C and+55 ° C (ambient temperature). This material has good electrical insulation and meets the requirements of most industrial environments. The conductive tube and pins are made of brass. For each voltage, in order to prevent incorrect connections, the grounding contacts are located in different positions relative to the safety keyway on each socket. All types are color coded according to voltage markings and are suitable for 50/60Hz operation.
Description:
Equipment Entrance - Wall Mounted These angled wall mounted input sockets are equipped with metric conduit connections at the top and bottom. The splash proof type only has one M20 connector located at the top and a spring cover to enhance intrusion protection when not in use. All products have been tested to comply with VDE models. ###The power input port of Mennekes equipment meets the latest requirements of British and European standards. The insulation shell and interior are made of Amaplast (nylon 6), which provides excellent mechanical properties between -25 ° C and+55 ° C (ambient temperature). This material has good electrical insulation and meets the requirements of most industrial environments. The conductive tube and pins are made of brass. For each voltage, in order to prevent incorrect connections, the grounding contacts are located in different positions relative to the safety keyway on each socket. All types are color coded according to voltage markings and are suitable for 50/60Hz operation.
Description:
2.5mm² Used for 16A type, 6mm ² for 32A type spring-loaded splash cover, with finger rotation pulling effect, easier to assemble, helps prevent finger pinching
Description:
16A Surface mounted socket with switch. There are two M25mm conduit entry ports at the top (one of which is closed), and two at the bottom (both closed), providing IP44 or IP67 options # # # Mennekes conversion interlock
Description:
Independent connector cable installation: The free connector can be used for industrial applications by unscrewing the terminal post screw to face a single path, simplifying the assembly of large-area terminals to receive wires. 2.5mm ² is used for 16A type and 6mm ² is used for 32A type spring-loaded splash proof cover, with finger rotation pulling effect, making it easier to assemble and helping to prevent finger clamping
Description:
StarTOP The plug and connector are sealed and fully screw free industrial plugs and connectors, used to reduce installation time by about 60% by connecting terminal bundle clamp wires. When the terminal is pushed into place, it provides a contact integrated pressure cable fixing head, which can automatically provide stress relief. It has a waterproof cable sealing level of IP44. The black connector is suitable for 500V/60Hz power supply, the green connector is suitable for 500V/100-300Hz power supply, and the 230V plug and socket, stock numbers 530-6151 and 530-6230, have * * four * * pins, suitable for 230V 3-phase power supply applications. They are not compatible with the standard 2P+E 3-pin blue 230V connector. ###Attention should be paid to ensuring that these 230V 3-phase connectors are used with the frequency converter. Under no circumstances should the output be disconnected from the frequency converter when there is still a load online. ### Mennekes Pro TOP and Star TOP ### Mennekes ProTOP & StarTOP Plugs and sockets conforming to the latest requirements of British and European standards. The insulator outer casing and interiors are manufactured from Amaplast (nylon 6) for excellent mechanical performance from -25 °C to +55° C (ambient temperature). This material provides good electrical insulation and will meet the requirements of most industrial environments.,Contact tubes and pins are made of brass. To prevent incorrect connection, the earth contact is in a different position, relative to the safety key way on each socket outlet, for each voltage.,Products are type tested to VDE.
Description:
StarTOP The plug and connector are sealed and fully screw free industrial plugs and connectors, used to reduce installation time by about 60% by connecting terminal bundle clamp wires. When the terminal is pushed into place, it provides a contact integrated pressure cable fixing head, which can automatically provide stress relief. It has a waterproof cable sealing level of IP44. The black connector is suitable for 500V/60Hz power supply, the green connector is suitable for 500V/100-300Hz power supply, and the 230V plug and socket, stock numbers 530-6151 and 530-6230, have * * four * * pins, suitable for 230V 3-phase power supply applications. They are not compatible with the standard 2P+E 3-pin blue 230V connector. ###Attention should be paid to ensuring that these 230V 3-phase connectors are used with the frequency converter. Under no circumstances should the output be disconnected from the frequency converter when there is still a load online. ### Mennekes Pro TOP and Star TOP ### Mennekes ProTOP & StarTOP Plugs and sockets conforming to the latest requirements of British and European standards. The insulator outer casing and interiors are manufactured from Amaplast (nylon 6) for excellent mechanical performance from -25 °C to +55° C (ambient temperature). This material provides good electrical insulation and will meet the requirements of most industrial environments.,Contact tubes and pins are made of brass. To prevent incorrect connection, the earth contact is in a different position, relative to the safety key way on each socket outlet, for each voltage.,Products are type tested to VDE.
Description:
Mennekes This EverGUM socket board from Mennekes, coated with rubber, features a solid rubber casing and pre wired for installation. The fuse is located behind the transparent cover. ###Mennekes socket
Description:
The Mennekes impact resistant series of European Schuko plugs and sockets for industrial splash proof connectors comply with DIN 49441/CEE7 standards. Schuko plugs and sockets are made of oil/gasoline resistant plastic, providing protection standards up to IP54. Nickel plated brass contacts provide low resistance dual scratch grounding contact plug-in terminal block IP54 grade size (mm) - Type | Q>10 L. Accuracy | Diameter | Height x Width x Thickness | Hole cannot be tapped plug | 105 | 42 | - Cannot be tapped socket | 134 | 57 | - | Panel socket | - | - | 61 x 50 x 46 | 44 diameter # # # # Schuko
Description:
IP44 The rating comes with a separate grounding terminal for the common grounding conductor cable entry line. A cable entry line is provided through a 2 x M25 threaded opening, equipped with a plastic non perforated top cover. BS4343 approved Mennekes multipole socket is also included
Description:
Mennekes Panel socket plugs, sockets, equipment entrances, and interlocking sockets comply with the latest requirements of British and European standards. The insulation shell and interior are made of Amaplast (polycarbonate), which provides excellent mechanical properties between -25 ° C and+55 ° C (ambient temperature). This material has good electrical insulation and meets the requirements of most industrial environments. The conductive tube and pins are made of brass. For each voltage, in order to prevent incorrect connections, the grounding contacts are located in different positions relative to the safety keyway on each socket. All types come with color coding based on voltage and are suitable for 50/60Hz operation. All products have been tested to comply with VDE models. Features include: full cover terminal with ribbed flange, used to increase strength with accompanying sealing gasket
