Description:
TAccessories # # # Recognition WRAS ### Tectite Pro Demountable Push Fit Fittings Enhanced performance demountable DZR brass fittings Features a stainless steel grab ring Suitable for use with copper or plastic tube For use in the mechanical services sector on hot and cold water applications Provides electrical continuity
Description:
WRAS ### Tectite Pro Demountable Push Fit Fittings Enhanced performance demountable DZR brass fittings Features a stainless steel grab ring Suitable for use with copper or plastic tube For use in the mechanical services sector on hot and cold water applications Provides electrical continuity
Description:
TAccessories # # # Recognition WRAS ### Tectite Sprint Push Fit Fittings Non-demountable copper fittings Fast and efficient heat free jointing Suitable for use with copper or plastic tube For use with hot and cold water applications Provides electrical continuity
Description:
BSP Parallel external thread # # # Note: For pressure/temperature guidelines, please refer to the main characteristic table### Fittings - Brass Type "A" compression fittings are suitable for mechanically joining copper or stainless steel by means of compressing a cone onto the tube without the application of heat. Manufactured to EN 1254 (formerly BS864/2), and carrying the prestigious Kitemark. Kitemark Licence No. KM 07082 to BS EN 1254/ BS 864 Part 2 Designed for use with copper tube to BS EN 1057: 1996 (formerly BS2871: Part 2, or stainless steel tube to BS4127: 1994. Key Characteristics --- **Medium** | **Service Temperature up to** | **Max. working pressure** | | ** ° C** | **BAR** | **PSI** Water or light mineral oils | 30 | 16 | 230 | 65 | 10 | 145 | 110 | 6 | 87 | 120 | 5 | 75 Compressed air non-shock | 30 | 7 | 100 Saturated steam | 120 | 3 | 45 LPG & Natural Gas | 30 | 1 | 15
Description:
WRAS ### Tectite Pro Demountable Push Fit Fittings Enhanced performance demountable DZR brass fittings Features a stainless steel grab ring Suitable for use with copper or plastic tube For use in the mechanical services sector on hot and cold water applications Provides electrical continuity
Description:
WRAS ### Tectite Pro Demountable Push Fit Fittings Enhanced performance demountable DZR brass fittings Features a stainless steel grab ring Suitable for use with copper or plastic tube For use in the mechanical services sector on hot and cold water applications Provides electrical continuity
Description:
87 mm Working pressure -7 bar # # # Standard BS 1224 # # Small faucets, cross shaped faucets, and section faucets with chrome plated brass bodies with 1/2 in. BSP parallel external threads
Description:
The self closing faucet has a solid structure - it is used for applications subject to frequent use or possible abuse. The non oscillating design can eliminate the water hammer effect. The pre installed plastic box can prevent internal corrosion. The current stabilizer can be sprayed. With a flow limiter, the interchangeable spray has a flow time of 15 seconds. The water saving controller can not be adjusted under 3 Bar pressure and the faucet can be tested separately under the pressure condition of 3 Bar. The flow rate is | | | | | | | | | | | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- -- -- | -- -- -- -- dynamic pressure | bar | 0.5 | 1 | 2 | 3 | 4 | 5 Minimum adjustable flow rate | L/s | 0.04 | 0.06 | 0.09 | 0.11 | 0.12 | 0.13 Maximum adjustable hydrodynamic rate | L/s | 0.14 | 0.20 | 0.30 | 0.36 | 0.4 | 0.44 Basic flow rate, for pipe layout calculation: 0.10 l/s | | | | | | | | | | | | | | Recommended pressure: 0.3 → 5 bar | | | | | | | ||
Description:
20 bar ### Standard BS 1010; WRc certified # # # small faucet, cross shaped faucet, and section faucet chrome plated brass body with 1/2 in. BSP parallel external thread
Description:
1/2 in. BSP Parallel internal and external thread length -2 in. # # # Standard BS 1224 # # # Chrome plated brass body for small faucets, cross shaped faucets, and section faucets, with 1/2 in. BSP parallel external thread
