Description:
EX Foot control switch EX, used in hazardous areas. Ex zones 1 and 2, as well as zones 21 and 22, have one type of pedal with/without protective shielding. The metal casing has a maximum of two contacts and a low pedal height with pre connected cables. The cable length is 3m and provides a special surface in RAL color. Standard IEC/EN 60947-5-1; EN 50014; EN 50018; EN 50281-1-1 # # # Foot controlled switch
Description:
EEX 95 Position switch with safety function EEx 95 is used for mechanical monitoring of hazardous area protection equipment. The thermoplastic shell design of Ex zones 1 and 2, as well as zones 21 and 22, complies with DIN EN 50 047 standard wiring room double insulation, providing overlapping contact actuator heads that can be adjusted at 4 positions and 90 degrees per step. The angle of the bias rotor lever can be adjusted at 10 degrees per step. Standard IEC/EN 60947-5-1; EN 1088; EN 50014; EN 50018; EN 50019; EN 50281-1-1 ### Steute
Description:
Radio receiver module, a 1-channel industrial wireless receiver and accessory based on EnOcean protocol, with a transmission frequency of 868.3 MHz. Thermoplastic shell EnOcean standard 1-channel: Free potential relay output 1 conversion contact, maximum 16 A, NPN or PNP output transmitter/receiver configuration LED through teaching mode, used to indicate switching status 868.3 MHz band 35 mm shell SMA plug-in connector for external antenna # # # Standard IEC 60068-2-6; IEC 60068-2-27 ### Steute
