Description:
SF-2 The SF-50 series SF series is only used for compression applications. These installation components have plates at the bottom instead of bolts. **All SUS models are stainless steel products of the same type. **Features and advantages: Compression attenuation to lower frequencies than rubber and chloroprene rubber mounting components while reducing vibration and noise. Base installation with top bolt fixation can reduce vibration by 5kg to 50kg (up to). The strong bonding between the metal parts and silicon of the four support legs is very suitable for outdoor use. SF-2, SF-5, and SF-10 have stainless steel base plates. SF-2 SUS, SF-5 SUS, and SF-10 SUS are all stainless steel models. Application information is particularly suitable for vacuum pumps, precision equipment, measurement applications, onboard computers, and other sensitive electronic devices. ###SF-30 and SF-50 are particularly suitable for attenuating large load vibrations. Due to its durable alphagel wrapped in EPDM rubber ® And become an excellent choice for outdoor use. Height h (mm) | 22--- | Top plate diameter (mm) | 30 bottom plate width x length (mm) | 36 x 60 bolt length (mm) | 18 bolt thread | M6 fixed center (mm) | 45 fixed hole width x length (mm) | 4.2 x 6 * * Type * * | * * Best load (kg/4 legs) * * | * * Harmonic point (Hz) * * | * * Resonant amplification factor (dB) * * | * * Recommended frequency (Hz) * * | * * Stock number * * --------- | ---------- | SF-2 | 5 to 13 | 15 to 10 | 12 to 13 | From 22 | 474-868 SF-5 | 13 to 30 | 13 to 9 | 15 to 16 | From 19 | 474-886 SF-10 | 30 to 50 | 12 to 9 | 19 to 21 | From 17 | 474-880 SF-30 | 100 to 140 | 8 to 9 | 18 to 19 | From 13 | 855-2219 SF-50 | 120 Up to 300 | 10 to 15 | 12 to 18 | From 15 | 474-814 # # # Note one item per pack # # Silicone low-frequency installation warning * Not applicable to applications involving uneven loads, angular loads, torsion, tension, or shear loads.
