Description:
690-849；Tin plated 567-812 foam etching: fine etching crystal 363-6573 or iron particle 367-0056 internal water tank | leakproof single piece polypropylene -- | -- external packaging material | 6mm polypropylene maximum plate size | 315 x 260 mm box capacity | 5 L working voltage | 240V, 50Hz user thermostat range | 10 ° C to 55 ° C # # # The PCB bracket is attached with fixing clips. The heating treatment and foam etching water tank also includes an IEC power line and siphon emptying tube # # # PCB developing equipment. These processing tanks have a variety of models and can complete the following complete seven step production process: 1 Development, 2 Rinse, 3 Etching, 4 Rinse, 5 Prevent peeling, 6 Rinse, 7 Chemical canning.
Description:
1/8 in. The advanced solid carbide printed circuit board drill bit with rod type tungsten carbide drill has significantly longer sharp parts than standard steel drill when drilling into epoxy glass printed circuit board thin plates. Only when the speed is fast enough can high-quality holes be drilled and fractures avoided. These drill bits are equipped with drill rings, which are easy to use and identify. ###Drilling/milling tools for printed circuit boards
Description:
The spare ultraviolet irradiation tube and starter package includes two ultraviolet fluorescent irradiation tubes and two starters, which can be used as spare parts for the ultraviolet irradiation device. ###Due to differences in physical and electrical properties, these types cannot be interchanged. ###Printed Circuit Board Development Equipment - Accessories
Description:
1/8 in. The advanced solid carbide printed circuit board drill bit with rod type tungsten carbide drill has significantly longer sharp parts than standard steel drill when drilling into epoxy glass printed circuit board thin plates. Only when the speed is fast enough can high-quality holes be drilled and fractures avoided. These drill bits are equipped with drill rings, which are easy to use and identify. Drilling/milling tools for printed circuit boards
Description:
1/8 in. The advanced solid carbide printed circuit board drill bit with rod type tungsten carbide drill has significantly longer sharp parts than standard steel drill when drilling into epoxy glass printed circuit board thin plates. Only when the speed is fast enough can high-quality holes be drilled and fractures avoided. These drill bits are equipped with drill rings, which are easy to use and identify. ###Drilling/milling tools for printed circuit boards
Description:
Economy Permanent Waterproof Ink Pen A permanent water-proof pen containing ink which has etch resist properties Circuits can be drawn on plain copper laminate and then etched in Ferric Chloride hand tools
Description:
12 in . The powerful and economical cutting tool can accurately cut laminated materials of printed circuit boards, plastic with a thickness of up to 2.0mm, and aluminum with a thickness of up to 1.5mm. An important feature of these scissors is safety. The organic glass shielding on both sides of the blade can prevent free contact with the cutting area. The safety latch is installed on the pivot to prevent operation and does not require initial release. In order to achieve precise positioning, the cutting bed is equipped with a scale that can be recessed, which helps to fix the printed circuit board or board during the cutting process. The 12in. cutter can cut material sizes up to 305mm (12in.), with a height of 670mm and a volume of 440mm x 245mm. Although wider materials can be cut again, there is still a larger insert bed 225mm away from the blade. Printed circuit board assembly equipment
Description:
1/8 in. The advanced solid carbide printed circuit board drill bit with rod type tungsten carbide drill has significantly longer sharp parts than standard steel drill when drilling into epoxy glass printed circuit board thin plates. Only when the speed is fast enough can high-quality holes be drilled and fractures avoided. These drill bits are equipped with drill rings, which are easy to use and identify. ###Drilling/milling tools for printed circuit boards
Description:
The 600-020 is an unique stable immerse Tin Plating Powder that although dissolved in water at 50℃ is allowed to cool and use at room temperature. The tin molecules deposited at room temperature are very small making the coating fine, hard and homogenous. Unmixed powder has unlimited shelf life.
Description:
PCB Preparation Seno Chemical Applicators Three applicators each containing safe, ready-to-use PCB chemistry, which offers a clean and efficient alternative to processing in trays Each applicator is sealed with a valve mechanism terminated by a sponge which dispenses precisely the right amount on the board All applicators work at room temperature, are waste free, and when exhausted can be disposed of without any special precautions Etching chemicals are suitable for use with RS printed circuit board boxes. These etching chemicals are provided in convenient packaging, with each package containing enough solution to fill a printed circuit board box. The packaging is printed with instructions for the use of these chemicals, and all containers in this series come with an instruction manual that restates the instructions for the use of these chemicals.
Description:
Single Sided PCB Laboratory Kit A comprehensive kit of equipment and consumables including single sided PCB material to 100mm x 220mm. PCB design software and a PCB drill should be considered separately purchased additions to this kit. **Contents: There are various types of processing tanks for developing printed circuit boards, which can complete the following complete 7-step production process: 1 Development, 2 Rinse, 3 Etching, 4 Rinse, 5 Prevent peeling, 6 Rinse, 7 Chemical canning.
