Description:
IFM These pressure sensors continuously evaluate and display system pressure on a 7-segment display screen. They provide switching outputs with complete hysteresis control (meaning the device can frequently replace HI and low mechanical switch pairs). Select and adjust parameters through two buttons. Inventory numbers 528-3755 to 528-3806 are upgraded versions with a four digit, seven segment display screen that can display bar, kPa, and psi. In addition, the zero point and span can be adjusted. Highly stable ceramic measuring components are highly resistant to overvoltage, low zero offset or aging, overvoltage or temperature offset, accurate and repeatable electronic adjustment: independent setting and reset point output function; Normally open, normally closed, or window function signal attenuation, output delay on and off time. Stainless steel, ceramic, and fluororubber wet parts have built-in locking functions to prevent unauthorized tampering. They only provide switching output or additional analog output IP 65 load current | 250mA -------- current consumption | ≤ 60mA ambient temperature | -25 ° C to+80 ° C medium temperature | -25 ° C to+80 ° C process connection | 1/4 BSP internal thread electrical connection | Standard M12 plug converter # # # Electronic display differential and gauge pressure sensor, suitable for non corrosive gas media, working temperature range of 0 to 50 ° C, voltage of 12 to 24 V DC. All have reverse polarity protection.
