Description:
Electromagnetic valve connector voltage tolerance ± 10% rated value 100% ED protection level IP65 (DIN 40050) electrical connection DIN 43650 table C used in conjunction with Nugget 40 and 120 valves # # # Norgren Nugget 40 series high flow small valve -17mm body width for base installation or straight through valve including 6mm push in accessories low-power solenoid valve manual override connected via DIN43560C connector solenoid valve working pressure 1.2 → 10 bar temperature range -20 →+50 ° C
Description:
Norgren Norgren series of high-quality center back, directly installed pressure gauges. Provide various pressure ranges, allowing monitoring of pressure at different locations around the compressed air system to ensure maximum efficiency. Provide 0-4 bar (822-4009, 822-4018), 0-6 bar (822-4011), and 0-10 bar (822-4015) center back installation with R1/8 "connection 40 or 50mm nominal diameter # # # gauge suitable for gases and liquids that will not obstruct pressure systems or corrode copper alloy components.
Description:
The anti tampering cover/cover prevents unauthorized adjustment of the regulator and can be used together with a lock chain (provided) or a padlock with a lock beam diameter of 8mm # # # throttling block, connector, and bracket
Description:
Norgren Norgren's sintered pneumatic muffler has a compact design and reduces the noise level of exhaust gas generated by pneumatic equipment, such as pneumatic valves. Norgren's sintered muffler also helps prevent dust from entering unprotected ports and causing damage. Provide flow factors ranging from 0.54 to 5.1 based on size. Maximum working pressure of 10 bar, maximum temperature of 80 ° C, cleaning of 40 micron diffusion element, sintered bronze element, brass base, muffler and exhaust limiter
Description:
Norgren Norgren's sintered pneumatic muffler has a compact design and reduces the noise level of exhaust gas generated by pneumatic equipment, such as pneumatic valves. Norgren's sintered muffler also helps prevent dust from entering unprotected ports and causing damage. Provide flow factors ranging from 0.54 to 5.1 based on size. Maximum working pressure of 10 bar, maximum temperature of 80 ° C, cleaning of 40 micron diffusion element, sintered bronze element, brass base, muffler and exhaust limiter
Description:
18D Mechanical and electrical pressure switches use pressure to connect and disconnect electronic circuits. The Norgren 18D pressure monitoring switch reliably monitors the minimum pressure and is equipped with automatic switch off and pressure limit warning. Suitable for pneumatic, hydraulic, and vacuum systems. Gold plated microswitch contacts allow for high switching cycles and are designed for pressure monitoring in hydraulic systems. They are designed to withstand vibrations up to 15G and are suitable for intrinsic safety protection of ATEX models (stock number 622-3647). Technical specifications include contact rating (ac) * * | contact rating (dc) * * | accuracy/repeatability * * | maximum operating frequency (cycles/minute) * * | fixed hysteresis * * | temperature range (° C) * * * | environmental protection * * 5A @ 250 V AC inductive (3A0 resistor) | 0.25A @ 250 V (DC) | ± 3% of set pressure | 120 | - | -20 to+80 | - # # Pressure switch. The microswitch allows for microswitch operation when the preset pressure is reached. Switch operation. The K and K3 series include mechanical stop devices that provide overvoltage protection for springs and micro switches. All models are electrically connected to DIN 43650. Warning: Pay attention to the switching range. Do not switch to the maximum allowable pressure during normal operation. The peak value of short pressure shall not exceed this value.
Description:
PRA/182000 Series repair kit Norgren ISO/VDMA pneumatic cylinder series repair kit. Can be used for cylinder sealing kits with inner diameters of 32mm (192-8678), 40mm (192-8684), 50mm (192-8690), and 63mm (822-3933). Each kit includes all relevant O-rings, grease, and polyurethane piston seals, suitable for cylinders of various sizes. PRA/1820 32-50mm diameter - Accessories
Description:
Norgren Excelon Efficient oil removal filter. The sintered filter element can convert oil and water mist into liquid and then discharge them. The quick release bayonet filter cover and service indicator are standard models for easy maintenance. The Norgren Excelon series is designed as part of modular installation with other Excelon products, or as a direct insertion device with other pneumatic air preparation equipment. The temperature range of high-efficiency filter with air conditioning function is -20 ° C to+50 ° C Polycarbonate filter cover Filter element material: synthetic fiber and polyurethane foam filter to 0.01 μ m residual oil content 0.01 mg/m3 # # # Typical flow at 6 bar inlet pressure and 0.5 bar pressure drop. ###Filter
Description:
B07 Best Performance of Filter Regulator - Minimum Space Temperature Range -20 ° C to+50 ° C Zinc Alloy Shell Polycarbonate Filter Cover Combination Filter and Regulator for Low Torque Push in Locking Adjustment Long Life Filter Cartridge Pressure Reducing Regulator Panel or Bracket Installation Warning * For applications below+2 ° C, please call the technical service hotline. The formation of ice may cause malfunctions or damage.
Description:
The universal pipeline sleeve is suitable for metal, nylon, and Hytrel pipelines. The sleeve, nut, and plug ENOTS compression fittings are suitable for the vast majority of conventional industrial applications. Made entirely of rolled brass rods or hot brass stamping parts, it can be used under extreme pressure and temperature conditions and is suitable for almost all practical applications, limited only by the selected pipes. durable.
Description:
The entire cylinder series is equipped with standard magnetic pistons, stainless steel piston rods, anodized aluminum alloy sleeves, and end caps made of polyurethane nitrile rubber seals. The ultra compact model is approximately one-third the length of the corresponding ISO model and has a spring return characteristic. The temperature range is -5 ° C to+80 ° C. (If used below+2 ° C, please consult our technical department.)
Description:
Norgren pressure gauges are a series of high-quality center back, directly installed pressure gauges. Provide various pressure ranges, allowing monitoring of pressure at different locations around the compressed air system to ensure maximum efficiency. Provide installation of R1/8 on the center back at 0-4 bar (822-4009, 822-4018), 0-6 bar (822-4011), and 0-10 bar (822-4015); The 40 or 50mm nominal diameter gauge is suitable for gases and liquids that do not obstruct pressure systems or corrode copper alloy components.
