Description:
EN14604:2005 ### Independent fire alarm device # # # Battery powered smoke alarm comprehensive series products, all with BS kite logo and complying with BS5446: Part 1: 1990 standard. Suitable for BS5839: Part 6: 1995 Fire Alarm System Level F. The interconnected power supply has all the new features required by building codes for installing main power smoke alarms. It may also require achieving the re equipment characteristics and a few commercial prerequisites for installing power supply alarms. BS5839: Part 6: 1995 acknowledges the need to consider these three types of detection (i.e. ionization, optical, and thermal detection) based on the installation environment. It is also recommended to use some backup methods when the main power supply fails. It is recommended to use optical alarms in circulation spaces such as stairs and corridors. Ionizing alarms are mainly suitable for living rooms and places with fixed temperatures, while thermal alarms are specifically designed for kitchens and garages. All alarms must be interconnected using 3-core cables and grounding cables. At least one alarm should be installed on each floor. The maximum distance between the alarm and the bedroom door is 7.5m, and it should not exceed 3m. If the alarm has its own backup power supply, it can be disconnected from the lighting circuit. The installation position should be as close as possible to the center of the ceiling and staggered from the lamp holder. The alarm must always be kept clean, especially during construction or renovation. ###To meet the requirements of building regulations, these alarms are suitable for use in new buildings. Each device can generate an alarm sound of up to 85dB within a range of 3m and is interconnected, allowing the sensing device to trigger up to 11 other detectors, greatly improving safety, especially in large buildings or behind closed doors where no device's alarm can be heard. The device that triggers the alarm also comes with an indicator to indicate the source of the fire alarm. Each device
Description:
EN14604:2005；Thermal standard BS5446-2:2003 # # # Independent fire alarm device # # # Battery powered smoke alarm comprehensive series products, all with BS kite logo and comply with BS5446: Part 1:1990 standard. Suitable for BS5839: Part 6: 1995 Fire Alarm System Level F. The interconnected power supply has all the new features required by building codes for installing main power smoke alarms. It may also require achieving the re equipment characteristics and a few commercial prerequisites for installing power supply alarms. BS5839: Part 6: 1995 acknowledges the need to consider these three types of detection (i.e. ionization, optical, and thermal detection) based on the installation environment. It is also recommended to use some backup methods when the main power supply fails. It is recommended to use optical alarms in circulation spaces such as stairs and corridors. Ionizing alarms are mainly suitable for living rooms and places with fixed temperatures, while thermal alarms are specifically designed for kitchens and garages. All alarms must be interconnected using 3-core cables and grounding cables. At least one alarm should be installed on each floor. The maximum distance between the alarm and the bedroom door is 7.5m, and it should not exceed 3m. If the alarm has its own backup power supply, it can be disconnected from the lighting circuit. The installation position should be as close as possible to the center of the ceiling and staggered from the lamp holder. The alarm must always be kept clean, especially during construction or renovation. ###To meet the requirements of building regulations, these alarms are suitable for use in new buildings. Each device can generate an alarm sound of up to 85dB within a range of 3m and is interconnected, allowing the sensing device to trigger up to 11 other detectors, greatly improving safety, especially in large buildings or behind closed doors where no device's alarm can be heard. The device that triggers the alarm also comes with an indicator to indicate the source of
Description:
Ei Professional The Easy Installation series alarm can be installed super quickly and simply. Designing to meet the highest standards of safety, performance, and reliability is highly capable of meeting the requirements of contractors, commentators, and end-users. Ei141 ionization, silent Ei146 optical, silent Ei128R relay approved EN14604:2005 independent fire alarm battery powered smoke alarm comprehensive series products, all with BS kite logo and comply with BS5446: Part 1:1990 standard. Suitable for BS5839: Part 6: 1995 Fire Alarm System Level F. The interconnected power supply has all the new features required by building codes for installing main power smoke alarms. It may also require achieving the re equipment characteristics and a few commercial prerequisites for installing power supply alarms. BS5839: Part 6: 1995 acknowledges the need to consider these three types of detection (i.e. ionization, optical, and thermal detection) based on the installation environment. It is also recommended to use some backup methods when the main power supply fails. It is recommended to use optical alarms in circulation spaces such as stairs and corridors. Ionizing alarms are mainly suitable for living rooms and places with fixed temperatures, while thermal alarms are specifically designed for kitchens and garages. All alarms must be interconnected using 3-core cables and grounding cables. At least one alarm should be installed on each floor. The maximum distance between the alarm and the bedroom door is 7.5m, and it should not exceed 3m. If the alarm has its own backup power supply, it can be disconnected from the lighting circuit. The installation position should be as close as possible to the center of the ceiling and staggered from the lamp holder. The alarm must always be kept clean, especially during construction or renovation. To meet the requirements of building regulations, these alarms are suitable for use in new buildings. Each device can generate an alarm sound of up to 85dB within a range of 3m and is interc
Description:
Ei Professional The Easy Installation series alarm can be installed super quickly and simply. Designing to meet the highest standards of safety, performance, and reliability is highly capable of meeting the requirements of contractors, commentators, and end-users. Ei141 ionization, silent Ei146 optical, silent Ei128R relay approved EN14604:2005 independent fire alarm battery powered smoke alarm comprehensive series products, all with BS kite logo and comply with BS5446: Part 1:1990 standard. Suitable for BS5839: Part 6: 1995 Fire Alarm System Level F. The interconnected power supply has all the new features required by building codes for installing main power smoke alarms. It may also require achieving the re equipment characteristics and a few commercial prerequisites for installing power supply alarms. BS5839: Part 6: 1995 acknowledges the need to consider these three types of detection (i.e. ionization, optical, and thermal detection) based on the installation environment. It is also recommended to use some backup methods when the main power supply fails. It is recommended to use optical alarms in circulation spaces such as stairs and corridors. Ionizing alarms are mainly suitable for living rooms and places with fixed temperatures, while thermal alarms are specifically designed for kitchens and garages. All alarms must be interconnected using 3-core cables and grounding cables. At least one alarm should be installed on each floor. The maximum distance between the alarm and the bedroom door is 7.5m, and it should not exceed 3m. If the alarm has its own backup power supply, it can be disconnected from the lighting circuit. The installation position should be as close as possible to the center of the ceiling and staggered from the lamp holder. The alarm must always be kept clean, especially during construction or renovation. To meet the requirements of building regulations, these alarms are suitable for use in new buildings. Each device can generate an alarm sound of up to 85dB within a range of 3m and is interc
Description:
False Alarm Hush Mode recognizes EN14604:2005 independent fire alarm battery powered smoke alarm comprehensive series products, all with BS kite logo and complying with BS5446: Part 1:1990 standard. Suitable for BS5839: Part 6: 1995 Fire Alarm System Level F. The interconnected power supply has all the new features required by building codes for installing main power smoke alarms. It may also require achieving the re equipment characteristics and a few commercial prerequisites for installing power supply alarms. BS5839: Part 6: 1995 acknowledges the need to consider these three types of detection (i.e. ionization, optical, and thermal detection) based on the installation environment. It is also recommended to use some backup methods when the main power supply fails. It is recommended to use optical alarms in circulation spaces such as stairs and corridors. Ionizing alarms are mainly suitable for living rooms and places with fixed temperatures, while thermal alarms are specifically designed for kitchens and garages. All alarms must be interconnected using 3-core cables and grounding cables. At least one alarm should be installed on each floor. The maximum distance between the alarm and the bedroom door is 7.5m, and it should not exceed 3m. If the alarm has its own backup power supply, it can be disconnected from the lighting circuit. The installation position should be as close as possible to the center of the ceiling and staggered from the lamp holder. The alarm must always be kept clean, especially during construction or renovation. To meet the requirements of building regulations, these alarms are suitable for use in new buildings. Each device can generate an alarm sound of up to 85dB within a range of 3m and is interconnected, allowing the sensing device to trigger up to 11 other detectors, greatly improving safety, especially in large buildings or behind closed doors where no device's alarm can be heard. The device that triggers the alarm also comes with an indicator to indicate the source of the fire alarm.
