Description:
Klaxon Flashguard These weather resistant Flashguard signal lights from Klaxon feature xenon flash tubes and diffusers to enhance visibility and radiation range. They have a slim design and are made of high-quality polycarbonate. ###Features and advantages: Compact and ultra modern with a smooth surface or box installation, equipped with a rear outlet cable that can withstand wind and rain up to IP67 (with cable connector). The white high-quality polycarbonate shell has a non-destructive safety locking mechanism. These Flashguard xenon signal lights are ideal visual indicators for safety alarms, emergency warnings, and general signals. ###Xenon flash
Description:
Klaxon Flashguard These weather resistant Flashguard signal lights from Klaxon feature xenon flash tubes and diffusers to enhance visibility and radiation range. They have a slim design and are made of high-quality polycarbonate. ###Features and advantages: Compact and ultra modern with a smooth surface or box installation, equipped with a rear outlet cable that can withstand wind and rain up to IP67 (with cable connector). The white high-quality polycarbonate shell has a non-destructive safety locking mechanism. These Flashguard xenon signal lights are ideal visual indicators for safety alarms, emergency warnings, and general signals. ###Xenon flash
Description:
LED When the fire alarm is working normally, the 8 LEDs will flash at a rate of 0.6Hz. When reversing polarity connection, one LED will flash at a rate of 0.4Hz. When installed with low power consumption, the full protection level reaches IP67. When using one LED lighting, the current consumption is 800 μ A; When 8 LEDs are used for illumination, the current consumption is 25mA. When 1 LED is turned on, it illuminates approximately 16ms every 2.6 seconds
Description:
32 The tone fire alarm speaker has an IP65 rating (limited to deep base models). Working type: continuous or synchronous line to base type or wire to terminal type. The speaker is locked to a shallow base or deep base option. When the base is turned off, the tone and volume are preset or adjusted. The light display on the speaker is a shallow base option. electron
Description:
50 Tone and volume control, second and third level alarms, high-power 5J xenon signal light speaker and signal light can be separately controlled, red fireproof box IP66 rating # # Xenon flash/electronic
Description:
LED The fire alarm signal light has an IP65 rating red or amber lens and comes with a red base. When the light or deep base options are 24V and 48V, it complies with the EN54 standard. The deep type is wired on the same side of the panel or wall; Shallow installation directly on the panel, with wiring passing through the panel. ### LED
Description:
Klaxon Flashguard These weather resistant Flashguard signal lights from Klaxon feature xenon flash tubes and diffusers to enhance visibility and radiation range. They have a slim design and are made of high-quality polycarbonate. ###Features and advantages: Compact and ultra modern with a smooth surface or box installation, equipped with a rear outlet cable that can withstand wind and rain up to IP67 (with cable connector). The white high-quality polycarbonate shell has a non-destructive safety locking mechanism. These Flashguard xenon signal lights are ideal visual indicators for safety alarms, emergency warnings, and general signals. ###Xenon flash
Description:
Klaxon Sonos The Sonos Pulse Signal Light Visual Alarm Device (VADS) from Klaxon uses patented pulse alarm technology that exceeds EN54-23 lighting requirements. Pulse alarm technology achieves maximum system efficiency by reducing power consumption and fixing the coverage range at the optimal performance level. Synchronous flash protection includes all individuals susceptible to photosensitive epilepsy. Wall mounted or ceiling mounted signal lights have white or red flashing lights and white or red enclosures. Applications include hotels, offices, factory workshops, and mechanical workshops. Compliant with EN54-23 pulse alarm technology, line to base technology, simple upgrade, synchronous flash, no surge current, flame retardant polycarbonate, weather resistant, IP65 (deep base), IP 21 (Shallow Base) Cable Entrance: Deep Base: 2 x 20 mm Cable Shield Weight: 0.24kg (Shallow Base) 0.29kg (Deep Base) # # # Wall mounted signal lights with a coverage range of up to 11.3m reduce the number of devices required - most rooms can be protected by a single device Plating White: EN54-23 coverage W-3.1-11.3 Plating Red: EN54-23 coverage W-2.4-7.5 Shallow Base: Ø 100 x 100mm High Base: Ø 122 x 97.5mm High # # # Ceiling mounted signal lights with a coverage range of up to 15m reduce the number of devices required - most rooms can be protected by a single device Plating White: EN54-23 coverage Age C-3-15 Red Plating: EN54-23 Coverage C-3-8.9 Shallow Base: Ø 94 x 100mm High Base: Ø 117 x 97.5mm High # # # Standard EN54-23 # # LED
Description:
32 Tone fire alarm speaker IP65 rating (limited to deep base models) Operating type: continuous or synchronous line to base type or wire to terminal type Speaker locked to base shallow base or deep base option Preset or adjust tone and volume when base is turned off # # Light injection display shallow base option. ###Electronic
Description:
32 Tone fire alarm speaker IP65 rating (limited to deep base models) Operating type: continuous or synchronous line to base type or wire to terminal type Speaker locked to base shallow base or deep base option Preset or adjust tone and volume when base is turned off # # Light injection display shallow base option.
Description:
Combination Call Point and Alarm Combined 3-tone continuous sounder and call point in mild steel housings Audible low battery warning Volume control ### Note that batteries are not included. Independent fire alarm systems and battery powered smoke alarms are a comprehensive series of products that all have the BS kite logo and comply with BS5446: Part 1: 1990 standards. Suitable for BS5839: Part 6: 1995 Fire Alarm System Level F. The interconnected power supply has all the new features required by building codes for installing main power smoke alarms. It may also require achieving the re equipment characteristics and a few commercial prerequisites for installing power supply alarms. BS5839: Part 6: 1995 acknowledges the need to consider these three types of detection (i.e. ionization, optical, and thermal detection) based on the installation environment. It is also recommended to use some backup methods when the main power supply fails. It is recommended to use optical alarms in circulation spaces such as stairs and corridors. Ionizing alarms are mainly suitable for living rooms and places with fixed temperatures, while thermal alarms are specifically designed for kitchens and garages. All alarms must be interconnected using 3-core cables and grounding cables. At least one alarm should be installed on each floor. The maximum distance between the alarm and the bedroom door is 7.5m, and it should not exceed 3m. If the alarm has its own backup power supply, it can be disconnected from the lighting circuit. The installation position should be as close as possible to the center of the ceiling and staggered from the lamp holder. The alarm must always be kept clean, especially during construction or renovation. ###To meet the requirements of building regulations, these alarms are suitable for use in new buildings. Each device can generate an alarm sound of up to 85dB within a range of 3m and is interconnected, allowing the sensing device to trigger up to 11 other detectors, greatly improving safety, especially in large
Description:
32 Tone fire alarm speaker IP65 rating (limited to deep base models) Operating type: continuous or synchronous line to base type or wire to terminal type Speaker locked to base shallow base or deep base option Preset or adjust tone and volume when base is turned off # # Light injection display shallow base option.
Description:
Klaxon Flashguard These weather resistant Flashguard signal lights from Klaxon feature xenon flash tubes and diffusers to enhance visibility and radiation range. They have a slim design and are made of high-quality polycarbonate. ###Features and advantages: Compact and ultra modern with a smooth surface or box installation, equipped with a rear outlet cable that can withstand wind and rain up to IP67 (with cable connector). The white high-quality polycarbonate shell has a non-destructive safety locking mechanism. These Flashguard xenon signal lights are ideal visual indicators for safety alarms, emergency warnings, and general signals. ###Xenon flash
Description:
Klaxon Nexus The Klaxon Nexus generator has 3 alarm stages, 64 tones, and volume controls to provide greater flexibility. The initial wiring is connected to the base and secured with quarter turn fasteners, providing fast and reliable installation. It has a standard IP66 protection level, which means it can be installed in almost any location. ###Features and advantages: The first of three alarm stages is fixed, with IP66 level volume control technology from wire to base, providing greater flexibility -20 dB with 64 tones and 5 cable entrances in UL V0 rated fire-resistant red polycarbonate box. The Nexus high output generator is designed for industrial applications such as conveyors, process control alarms, cranes, mobile machinery, and general signals. ###Standard EN54. ###Electronic
Description:
Master Blaster Klaxon High output, motor-driven alarm, specifically designed for intrusion alarm systems. The alarm operates continuously at rated value and is equipped with a relay (12Vdc) directly connected to the alarm panel. 24/7 ABS molded shell independent installation bracket, easy to install pre connected 1m power cable and 1m relay cable # # # Alarm and selector kit
Description:
Klaxon Flashguard These weather resistant Flashguard signal lights from Klaxon feature xenon flash tubes and diffusers to enhance visibility and radiation range. They have a slim design and are made of high-quality polycarbonate. ###Features and advantages: Compact and ultra modern with a smooth surface or box installation, equipped with a rear outlet cable that can withstand wind and rain up to IP67 (with cable connector). The white high-quality polycarbonate shell has a non-destructive safety locking mechanism. These Flashguard xenon signal lights are ideal visual indicators for safety alarms, emergency warnings, and general signals. ###Xenon flash
Description:
32 The tone fire alarm speaker has an IP65 rating (limited to deep base models). Working type: continuous or synchronous line to base type or wire to terminal type. The speaker is locked to a shallow base or deep base option. When the base is turned off, the tone and volume are preset or adjusted. The light display on the speaker is a shallow base option. electron
Description:
Klaxon Sonos The Sonos Pulse Signal Light Visual Alarm Device (VADS) from Klaxon uses patented pulse alarm technology that exceeds EN54-23 lighting requirements. Pulse alarm technology achieves maximum system efficiency by reducing power consumption and fixing the coverage range at the optimal performance level. Synchronous flash protection includes all individuals susceptible to photosensitive epilepsy. Wall mounted or ceiling mounted signal lights have white or red flashing lights and white or red enclosures. Applications include hotels, offices, factory workshops, and mechanical workshops. Compliant with EN54-23 pulse alarm technology, line to base technology, simple upgrade, synchronous flash, no surge current, flame retardant polycarbonate, weather resistant, IP65 (deep base), IP 21 (Shallow Base) Cable Entrance: Deep Base: 2 x 20 mm Cable Shield Weight: 0.24kg (Shallow Base) 0.29kg (Deep Base) # # # Wall mounted signal lights with a coverage range of up to 11.3m reduce the number of devices required - most rooms can be protected by a single device Plating White: EN54-23 coverage W-3.1-11.3 Plating Red: EN54-23 coverage W-2.4-7.5 Shallow Base: Ø 100 x 100mm High Base: Ø 122 x 97.5mm High # # # Ceiling mounted signal lights with a coverage range of up to 15m reduce the number of devices required - most rooms can be protected by a single device Plating White: EN54-23 coverage Age C-3-15 Red Plating: EN54-23 Coverage C-3-8.9 Shallow Base: Ø 94 x 100mm High Base: Ø 117 x 97.5mm High # # # Standard EN54-23 # # LED
Description:
50 Tone and volume control, second and third level alarms, high-power 5J xenon signal light speaker and signal light can be separately controlled, red fireproof box IP66 rating # # Xenon flash/electronic
Description:
Klaxon Nexus The Klaxon Nexus generator has 3 alarm stages, 64 tones, and volume controls to provide greater flexibility. The initial wiring is connected to the base and secured with quarter turn fasteners, providing fast and reliable installation. It has a standard IP66 protection level, which means it can be installed in almost any location. ###Features and advantages: The first of three alarm stages is fixed, with IP66 level volume control technology from wire to base, providing greater flexibility -20 dB with 64 tones and 5 cable entrances in UL V0 rated fire-resistant red polycarbonate box. The Nexus high output generator is designed for industrial applications such as conveyors, process control alarms, cranes, mobile machinery, and general signals. ###Standard EN54.
Description:
50 Tone and volume control, second and third level alarms, high-power 5J xenon signal light speaker and signal light can be separately controlled, red fireproof box IP66 rating # # Xenon flash/electronic
Description:
50 Tone and volume control, second and third level alarms, high-power 5J xenon signal light, speaker and signal light can be individually controlled, red fireproof box, IP66 rating xenon flash/electronic
