产品列表
Product Information
Description
Inventory
Gradient pricing
  • Brand: ABB
    Encapsulation:
    Description: OVR Type 1 Surge Protection Device for TNC 230V Network - System Pro M Compact OVR Type 1 Surge Protection Device comes with a status indicator light that can change from green to red at the end of the device's service life. The System Pro M also has a safety reserve system, where when the surge current exceeds the maximum capacitance of the device, the surge protection device will switch to the safety reserve position and the remote indicator light (TS) will switch to the defect. Therefore, users can be warned in advance to have more time to replace the sleeve. Because in the safety reserve position, with the help of a two-stage disconnect system, safety protection can still be ensured. The Pro m compact system is a plug-in device that facilitates maintenance in the event of sleeve failure due to power surges and lightning events. Therefore, replacing the spare sleeve does not require isolating the circuit or disconnecting any related wiring. The auxiliary contact (TS) function is executed by a 3-point 1A voltage free contact, which can remotely check the operating status of surge protection equipment. The applications of System Pro M include green energy systems for solar and wind turbines. ###Surge protection equipment, SPD (DIN rail) voltage surge is often referred to as peak or transient overvoltage, which is usually caused by switch fluorescent lamps, fuse burnout, or nearby lightning activity. The worst voltage surges are usually caused by lightning, with voltages up to 6000V and current surges exceeding 3000A. The maximum value of voltage and current surges caused by lightning strikes depends on the location within the building's wiring system. BS7671: First revised edition in 2011, sections 443 and 534 cover risk assessment and provide guidance on electronic device protection for installation engineers to follow. The BSEN 62305 standard series provides the most comprehensive information on lightning and surge protection.
    7383
    1+
    $1475.0098
    10+
    $1461.6006
    25+
    $1454.8960
    50+
    $1448.1914
    100+
    $1441.4869
    150+
    $1434.7823
    250+
    $1428.0777
    500+
    $1421.3731
  • Brand: ABB
    Encapsulation:
    Description: ABB OVR The series suggests using these surge protection devices in locations that can fully expose to lightning, such as light source entrances in buildings protected by lightning rods or powered by antennas. These products are installed at the entrance of the installation location (such as the main distribution board). Simple DIN rail installation IP20 protection working temperature range: -40 ° C →+80 ° C # # # Industrial circuit protection
    8287
    1+
    $2446.0425
    10+
    $2423.8058
    25+
    $2412.6874
    50+
    $2401.5690
    100+
    $2390.4506
    150+
    $2379.3323
    250+
    $2368.2139
    500+
    $2357.0955
  • Brand: ABB
    Encapsulation:
    Description: Surge arrestor; Type 2; Poles no:3+N; 255VAC; Mounting: DIN; IP20
    5560
    1+
    $1068.6086
    10+
    $1031.1136
    50+
    $1026.4267
    100+
    $1021.7398
    150+
    $1014.2408
    250+
    $1007.6792
    500+
    $1001.1176
    1000+
    $993.6186
  • Brand: ABB
    Encapsulation:
    Description: Surge arrestor; Type 2; Poles no:1+N; 255VAC; Mounting: DIN; IP20
    4006
    1+
    $1452.1320
    10+
    $1438.9308
    25+
    $1432.3302
    50+
    $1425.7296
    100+
    $1419.1290
    150+
    $1412.5284
    250+
    $1405.9278
    500+
    $1399.3272
  • Brand: ABB
    Encapsulation:
    Description: Surge arrestor; Type 2; Poles no:3; 255VAC; Mounting: DIN; IP20
    8523
    1+
    $691.9127
    10+
    $667.6351
    50+
    $664.6004
    100+
    $661.5657
    150+
    $656.7102
    250+
    $652.4616
    500+
    $648.2130
    1000+
    $643.3575
  • Brand: ABB
    Encapsulation:
    Description: Surge arrestor; Type 2; Poles no:1+N; 255VAC; Mounting: DIN; IP20
    8684
    1+
    $654.0693
    10+
    $631.1195
    50+
    $628.2508
    100+
    $625.3821
    150+
    $620.7921
    250+
    $616.7759
    500+
    $612.7597
    1000+
    $608.1697
  • Brand: ABB
    Encapsulation:
    Description: MISTRAL65 This new series of MISTRAL65 distribution boxes allows almost any type of distribution system to be used in industrial, commercial, and residential environments. The distribution box is made of halogen-free thermoplastic material and is completely recyclable. This series comes with transparent or opaque doors that can be opened 180 °, with 4 to 72 modules to choose from, meeting the latest regulatory requirements and ensuring suitability for a wide range of application types. This exquisite design has certain features, such as perfect symmetry that allows the entire distribution box or just the front panel to rotate, making it easy to change the opening side of the door. In multi row models, the center distance range of DIN rails is 150 mm to 125 mm, which can further enhance the versatility of the product and use the same standard accessories. This framework can be pulled to achieve fast and simple workbench cable routing. Adequate internal space makes it easier for cables to come into contact, effectively facilitating cable routing and securing cable ports to special viewing holes in the frame. The distribution box is designed to apply two different color schemes to the housing of optional dedicated terminal blocks, in order to achieve fast and tidy cable routing while ensuring easy identification of individual power sources during use. This series can be fully compatible with ABB MCB and MCCB, and can be easily installed by simply moving the rails provided for its casing. The project design also aims to optimize the cable routing, assembly, and installation time of the distribution box. The design of the entire product aims to make the work of installers faster and simpler, enabling them to create a practical and tidy distribution panel. The box door can be opened 180 degrees to facilitate full access to the internal devices of the distribution box. The symmetrical blue transparent door at the front allows for completely reverse opening. The box door adopts an ergonomic handle with a snap in closure
    1807
  • Brand: ABB
    Encapsulation:
    Description: Miniature Circuit Breakers
    1709
  • Brand: ABB
    Encapsulation:
    Description: TMAX LP SOR-C 24-30VDC T4-T6
    3811
    1+
    $1605.9560
    10+
    $1591.3564
    25+
    $1584.0566
    50+
    $1576.7568
    100+
    $1569.4570
    150+
    $1562.1572
    250+
    $1554.8574
    500+
    $1547.5576
  • Description: Tmax ABB's Tmax series of molded case circuit breakers offers a complete range of molded case circuit breakers, covering current ratings from 15A to 2500A and interruption ratings up to 150 kA at 480 V. Models may vary due to some having terminal blocks and others not having connectors. The possibility of standardizing the 45mm front and 70mm deep assembly of 1-pole and 3-pole fixed molded case circuit breakers on substrates or DIN rails for single flange doors of cabin doors. The standard copper cable terminals on T1 and the front terminal of T3 are operated in the forward direction, complying with IEC 60417-2 double insulation to ensure isolation and IEC 60947-2 ABB distribution boards, MCCBs, and accessories
    3912
    1+
    $787.5325
    10+
    $759.8998
    50+
    $756.4457
    100+
    $752.9916
    150+
    $747.4651
    250+
    $742.6294
    500+
    $737.7936
    1000+
    $732.2671
  • Brand: ABB
    Encapsulation:
    Description: TOL, AS/L, B/C, CLASS-10, 0.74-1A
    8531
    1+
    $203.1625
    10+
    $197.8626
    50+
    $193.7993
    100+
    $192.3860
    200+
    $191.3260
    500+
    $189.9127
    1000+
    $189.0294
    2000+
    $188.1461
  • Brand: ABB
    Encapsulation:
    Description: Spec-Kon® Polyamide 6.6 cable buckle, black, UV resistant ABB Spec kon ® Polyamide 6.6 standard, black, UV resistant cable ties are available in various lengths (100 to 912 mm) and tensile strengths (80 to 780 N). Polyamide 6.6 material temperature range -40 ° C to+85 ° C flammability rating UL94V-2 halogen-free and silicon free cable tie - nylon
    8489
    5+
    $32.9051
    50+
    $31.4989
    200+
    $30.7114
    500+
    $30.5145
    1000+
    $30.3177
    2500+
    $30.0927
    5000+
    $29.9521
    7500+
    $29.8114
  • Brand: ABB
    Encapsulation:
    Description: Spec-Kon® Polyamide 6.6 cable buckle, natural color ABB Spec kon ® Polyamide 6.6 standard cable ties are particularly suitable for control panel applications. The cable is halogen-free and silicon free, with a natural color. ###Features and advantages: Polyamide 6.6 material, temperature range -40 ° C to+85 ° C, flammability rating UL94V-2 halogen-free and silicon free, standard UL 94 V-2, cable tie - nylon
    5817
    1+
    $288.2809
    10+
    $280.7605
    50+
    $274.9949
    100+
    $272.9894
    200+
    $271.4854
    500+
    $269.4799
    1000+
    $268.2265
    2000+
    $266.9731
  • Brand: ABB
    Encapsulation: SMD
    Description: DC DC CONVERTER 12V 15W
    6345
    1+
    $177.0805
    10+
    $172.4610
    50+
    $168.9194
    100+
    $167.6875
    200+
    $166.7636
    500+
    $165.5317
    1000+
    $164.7618
    2000+
    $163.9919
  • Brand: ABB
    Encapsulation:
    Description: Module DC-DC 48VIN 1-OUT 12V 1.2A 6-Pin Bag
    9259
    1+
    $175.4417
    10+
    $170.8650
    50+
    $167.3561
    100+
    $166.1357
    200+
    $165.2203
    500+
    $163.9999
    1000+
    $163.2371
    2000+
    $162.4743
  • Brand: ABB
    Encapsulation:
    Description: Isolated DC/DC converter
    5730
  • Brand: ABB
    Encapsulation:
    Category: Contact block
    Description: ABB CA4-10 Switch contact block, AF09-AF38 and NF Contactors, 6 A, 690 V, 600 V, tightened, 1 position
    8169
    1+
    $59.0019
    10+
    $56.4366
    100+
    $55.9748
    250+
    $55.6157
    500+
    $55.0513
    1000+
    $54.7948
    2500+
    $54.4357
    5000+
    $54.1278
  • Brand: ABB
    Encapsulation:
    Category: terminal block
    Description: ABB 1SSS889204R3200 Wire-To-Board Terminal Block, 9.53mm, 4 Ways, 20AWG, 10AWG, 4mm², Push In Lock
    4838
  • Brand: ABB
    Encapsulation:
    Description: Modular 3POS Selector Switch Head LongHandle Black Spring Return to Centre
    4288
    1+
    $81.6500
    10+
    $78.1000
    100+
    $77.4610
    250+
    $76.9640
    500+
    $76.1830
    1000+
    $75.8280
    2500+
    $75.3310
    5000+
    $74.9050
  • Brand: ABB
    Encapsulation:
    Description: Selector Switch, 3POS Maint, Op Onl Non-Ill, 22mm Mounting, Blk Lever, Operator Only, Black Plastic Bezel
    9423
    1+
    $74.0865
    10+
    $70.8653
    100+
    $70.2855
    250+
    $69.8345
    500+
    $69.1259
    1000+
    $68.8038
    2500+
    $68.3528
    5000+
    $67.9663
  • Brand: ABB
    Encapsulation:
    Description: Modular 2Position Selector Switch HeadLong Handle Black Latching
    6553
    1+
    $72.9664
    10+
    $69.7939
    100+
    $69.2229
    250+
    $68.7787
    500+
    $68.0808
    1000+
    $67.7635
    2500+
    $67.3194
    5000+
    $66.9387
  • Brand: ABB
    Encapsulation:
    Description: Selector Switch, 3Position, Non-Illuminated, 1 NO + 1NC, Momentary, Black
    3208
    1+
    $140.7347
    10+
    $137.0634
    50+
    $134.2487
    100+
    $133.2696
    200+
    $132.5354
    500+
    $131.5564
    1000+
    $130.9445
    2000+
    $130.3326
  • Brand: ABB
    Encapsulation:
    Description: Selector Switch Operator, 2POS Main Non-Ill, 22mm Mounting, Blk Knob, Black Plastic Bezel, 10 & 2POS's
    2335
    1+
    $108.8935
    10+
    $104.1590
    100+
    $103.3068
    250+
    $102.6440
    500+
    $101.6024
    1000+
    $101.1289
    2500+
    $100.4661
    5000+
    $99.8980
  • Brand: ABB
    Encapsulation:
    Category: Switch accessories
    Description: ABB The fuse type load switch OS and OSM series are used together. Please refer to example inventory number 710-0582 and series. ###The ABB OS series fuse type isolating switch provides cost-effective short-circuit protection and circuit isolation methods. The rated value of the selected fuse determines the level of protection, and the maximum value is determined by the fuse type isolating switch. These items have been tested according to EN 60947-3 standard.
    8070
    1+
    $166.5085
    10+
    $162.1648
    50+
    $158.8346
    100+
    $157.6763
    200+
    $156.8076
    500+
    $155.6493
    1000+
    $154.9253
    2000+
    $154.2014
  • Brand: ABB
    Encapsulation:
    Description: 2POS SW MAIN B-C ILL KNOB 1NO
    5420
    1+
    $268.0984
    10+
    $261.1045
    50+
    $255.7425
    100+
    $253.8775
    200+
    $252.4787
    500+
    $250.6137
    1000+
    $249.4480
    2000+
    $248.2824
  • Brand: ABB
    Encapsulation:
    Description: ABB SRX The SRX casing is made of AISI 304 stainless steel, designed to provide high standards of protection and strength, as well as a very high level of hygiene. They are particularly suitable for the following environments: food, chemical and pharmaceutical industries, and hospital departments. ATEX certification (Ex ll 3 G D) IP66 protection (IEC EN 60529) NEMA 4X (UL standard) IK10 external mechanical shock protection (IEC 62262) Floor or wall mounted normal working conditions: -25 to+55 ° C # # # Note that the enclosure * * does not have * * cable entry flanges or inner doors. ###Standard IEC EN 62208, IEC EN 60439-1, IEC 61439-1-2 certified UL (Underwriters Laboratories) Ex # # # comes with AISI 304 stainless steel casing, with ordinary doors and galvanized sheet metal bottom plate. ###Steel plate wall installation box
    2624
    1+
    $2088.1916
    10+
    $2069.2080
    25+
    $2059.7163
    50+
    $2050.2245
    100+
    $2040.7327
    150+
    $2031.2409
    250+
    $2021.7491
    500+
    $2012.2574
  • Brand: ABB
    Encapsulation:
    Description: MISTRAL65 This new series of MISTRAL65 distribution boxes allows almost any type of distribution system to be used in industrial, commercial, and residential environments. The distribution box is made of halogen-free thermoplastic material and is completely recyclable. This series comes with transparent or opaque doors that can be opened 180 °, with 4 to 72 modules to choose from, meeting the latest regulatory requirements and ensuring suitability for a wide range of application types. This exquisite design has certain features, such as perfect symmetry that allows the entire distribution box or just the front panel to rotate, making it easy to change the opening side of the door. In multi row models, the center distance range of DIN rails is 150 mm to 125 mm, which can further enhance the versatility of the product and use the same standard accessories. This framework can be pulled to achieve fast and simple workbench cable routing. Adequate internal space makes it easier for cables to come into contact, effectively facilitating cable routing and securing cable ports to special viewing holes in the frame. The distribution box is designed to apply two different color schemes to the housing of optional dedicated terminal blocks, in order to achieve fast and tidy cable routing while ensuring easy identification of individual power sources during use. This series can be fully compatible with ABB MCB and MCCB, and can be easily installed by simply moving the rails provided for its casing. The project design also aims to optimize the cable routing, assembly, and installation time of the distribution box. The design of the entire product aims to make the work of installers faster and simpler, enabling them to create a practical and tidy distribution panel. The box door can be opened 180 degrees to facilitate full access to the internal devices of the distribution box. The symmetrical blue transparent door at the front allows for completely reverse opening. The box door adopts an ergonomic handle with a snap in closure
    9489
    1+
    $594.7688
    10+
    $573.8997
    50+
    $571.2911
    100+
    $568.6824
    150+
    $564.5086
    250+
    $560.8565
    500+
    $557.2044
    1000+
    $553.0306
  • Brand: ABB
    Encapsulation:
    Category: Switch accessories
    Description: ABB Single light block on modular series guided equipment (for front installation). The BA 9s base is suitable for maximum 2 W, 230 V AC and DC filament bulbs or LED # # # ABB 22 mm modular series ABB modular series guiding equipment, including controllers, supports, contact blocks, and various accessories.
    3454
    1+
    $48.8159
    10+
    $46.0150
    100+
    $43.9343
    250+
    $43.6142
    500+
    $43.2941
    1000+
    $42.9339
    2500+
    $42.6138
    5000+
    $42.4138
  • Brand: ABB
    Encapsulation:
    Category: AC-DCconverter
    Description: ABB 1SVR427024R0000 AC/DC power supply, DIN rail, switch mode, fixed/adjustable, 85 V, 264 V, 135 W, 24 V, 5 A
    8990
    1+
    $1423.3780
    10+
    $1410.4382
    25+
    $1403.9683
    50+
    $1397.4984
    100+
    $1391.0285
    150+
    $1384.5586
    250+
    $1378.0887
    500+
    $1371.6188
  • Brand: ABB
    Encapsulation:
    Category: Rotary-switch
    Description: 300 V Working current 10 A Switching frequency 150 Maximum cable cross-section (solid/twisted) 1.5mm2 Working temperature -30 ° C →+70 ° C # # # Standard IEC60947-4 # # # ABB Camline ABB's series of compatible cam switches can be used for panel construction, HVAC, and motor control applications.
    3935
    1+
    $231.9033
    10+
    $225.8536
    50+
    $221.2155
    100+
    $219.6023
    200+
    $218.3924
    500+
    $216.7791
    1000+
    $215.7709
    2000+
    $214.7626

©Copyright 2013-2025 ICGOODFIND (Shenzhen) Electronics Technology Co., Ltd.

Scroll